DOI QR코드

DOI QR Code

Numerical investigations on winglet effects on aerodynamic and aeroacoustic performance of a civil aircraft wing

  • 투고 : 2021.04.04
  • 심사 : 2021.11.20
  • 발행 : 2021.07.25

초록

The paper discusses the effect of the winglets on the aerodynamic and aeroacoustic performance of Boeing 737-800 aircraft by numerical approach. For this purpose, computational fluid dynamics and fluent commercial software are used to solve the compressible flow governing equations. The RANS method and the K-ω SST turbulence model are selected to simulate the subsonic flow around the wing with acceptable accuracy and low computational cost. The main variables of steady flow around the simple and blended wing in constant atmospheric conditions are computed by numerical solution of governing equations. The solution of the acoustic field has also been accomplished by the broad-band acoustic source model. The results reveal that adding a blended winglet increases the pressure difference near the wingtip,which increases the lift force. Also, the blended winglet reduces the power and magnitude of vorticities around the wingtip, which reduces the wing's drag force. The effects of winglets on aerodynamic forces lead to a 3.8% increase in flight range and a 3.6% increase in the maximum payload of the aircraft. Also, the acoustic power level variables on the surfaces and fields around the wing have been investigated integrally and locally.

키워드

참고문헌

  1. Abdelghany, E.S., Khalil, E.E., Abdellatif, O.E. and Elhariry, G. (2016), "Aircraft winglet design and performance: Cant angle effect", Proceedings of the 14th International Energy Conversion Engineering Conference, Salt Lake City, U.S.A., October.
  2. Ali, A.H. (2020), "Aerodynamic characteristics comparison between spiroid and blended winglets", J. Eng., 26, 33-46. https://doi.org/10.31026/j.eng.2020.04.03.
  3. Ansys Inc. (2011), "Ansys fluent theory guide", 15317, 724-746, ANSYS Inc., USA.
  4. Azlin, M.A., Taib, C.M., Kasolang, S. and Muhammad, F. (2011), "CFD analysis of winglets at low subsonic flow", Proceedings of the World Congress on Engineering, London, U.K., July.
  5. Brocklehurst, A. and Barakos, G. (2013), "A review of helicopter rotor blade tip shapes", Prog. Aerosp. Sci., 56, 35-74. https://doi.org/10.1016/j.paerosci.2012.06.003.
  6. Chae, S., Yee, K., Yang, C., Aoyama, T., Jeong, S. and Obayashi, S. (2010), "Helicopter rotor shape optimization for the improvement of aeroacoustic performance in hover", J. Aircr., 47(5), 1770-1783. https://doi.org/10.2514/1.C000283.
  7. Czech, M.J., Thomas, R.H. and Elkoby, R. (2012), "Propulsion airframe aeroacoustic integration effects for a hybrid wing body aircraft configuration", Int. J. Aeroacoust., 11(3-4), 335-367. https://doi.org/10.1260/1475-472X.11.3-4.335.
  8. Diskin, B. and Thomas, J.L. (2016), "Introduction: Evaluation of RANS solvers on benchmark aerodynamic flows", Am. Inst. Aeronaut. Astronaut., 54, 2561-2576. https://doi.org/10.2514/1.J054642.
  9. Dziubinski, A., Jaskowski, P. and Seredyn, T. (2016), "CFD analysis of agricultural aircraft aerodynamic characteristics", Prace Instytutu Lotnictwa, 4, 312-337. https://doi.org/10.5604/05096669.1229486.
  10. Eguea, J.P., Da silva, G.P.G. and Catalano, F.M. (2020), "Fuel efficiency improvement on a business jet using a camber morphing winglet concept", Aerosp. Sci. Technol., 96, 105542. https://doi.org/10.1016/j.ast.2019.105542.
  11. Elham, A. and Van tooren, M.J. (2014), "Winglet multi-objective shape optimization", Aerosp. Sci. Technol., 37, 93-109. https://doi.org/10.1016/j.ast.2014.05.011.
  12. Ewert, R., Dierke, J., Siebert, J., Neifeld, A., Appel, C., Siefert, M. and Kornow, O. (2011), "CAA broadband noise prediction for aeroacoustic design", J. Sound Vib., 330(17), 4139-4160. https://doi.org/10.1016/j.jsv.2011.04.014.
  13. Farhan, A., Hassanpour, A., Burns, A. and Motlagh, Y.G. (2019), "Numerical study of effect of winglet planform and airfoil on a horizontal axis wind turbine performance", Renew. Energ., 131, 1255-1273. https://doi.org/10.1016/j.renene.2018.08.017.
  14. Fillola, G., Le pape, M.C. and Montagnac, M. (2004), "Numerical simulations around wing control surfaces", Proceedings of the 24th International Congress of the Aeronautical Sciences, Yokohama, Japan, August.
  15. Gao, H., Zhu, W., Liu, Y. and Yan, Y. (2019), "Effect of various winglets on the performance of marine propeller", Appl. Ocean Res., 86, 246-256. https://doi.org/10.1016/j.apor.2019.03.006.
  16. Gavrilovic, N.N., Rasuo, B.P., Dulikravich, G.S. and Parezanovic, V.B. (2015), "Commercial aircraft performance improvement using winglets", FME Transact., 43(1), 1-8. https://doi.org/10.5937/fmet1501001G.
  17. Ghoreyshi, M., Vallespin, D., Da Ronch, A., Badcock, K., Vos, J. and Hitzel, S. (2010), "Simulation of aircraft manoeuvres based on computational fluid dynamics", Proceedings of AIAA Atmospheric Flight Mechanics Conference, Toronto, Canada, August.
  18. Guerrero, J.E., Sanguineti, M. and Wittkowski, K. (2020), "Variable cant angle winglets for improvement of aircraft flight performance", Meccanica, 55(10), 1917-1947. https://doi.org/10.1007/s11012-020-01230-1.
  19. Hasanzadeh, K., Laurenseau, E., Saeed, F. and Paraschivoiu, I. (2012), "Wing aerodynamic performance analysis and stall prediction using canice2d-ns icing code", Proceedings of the 20th Annual Conference of the CFD Society of Canada, Grapevine, Canada, January.
  20. Helal, H.S., Khalil, E.E., Abdellatif, O.E. and Elhariry, G.M. (2016), "Aerodynamic analyses of aircraft-blended winglet performance", IOSR J. Mech. Civ. Eng. Ver, 13(13), 2320-2334. https://doi.org/10.9790/1684-1303046572.
  21. Hiremath, S. and Malipatil, A.S. (2014), "CFD simulations of aircraft body with different angle of attack and velocity", Int. J. Innov. Res. Sci. Eng. Technol., 3(10), 16965-16972. https://doi.org/10.15680/IJIRSET.2014.0310077.
  22. Horvath, C. and Vad, J. (2009), "Broadband noise source model acoustical investigation on unskewed and skewed axial flow fan cascades", Proceedings of the 14th International Conference on Fluid Flow Technologies, Budapest, Hungary, September.
  23. Imamura, T., Hirai, T., Amemiya, K., Yokokawa, Y., Enomoto, S. and Yamamoto, K. (2010), "Aerodynamic and aeroacoustic simulations of a two-wheel landing gear", Procedia Eng., 6, 293-302. https://doi.org/10.1016/j.proeng.2010.09.031.
  24. Jain, R., Jain, M.S. and Bajpai, L. (2016), "Aerodynamics of winglet: A computational fluid dynamics study using fluent", Int. Res. J. Eng. Technol., 3(6), 250-254. http://doi.org/10.13140/RG.2.2.35908.48009.
  25. Jameson, A. and Fatica, M. (2006), "Using computational fluid dynamics for aerodynamics-a critical assessment", Proceedings of the 23rd International Congress of Aeronautical Sciences, Toronto, Canada, September.
  26. Kobayashi, H., Yaji, K., Yamasaki, S. and Fujita, K. (2019), "Freeform winglet design of fin-and-tube heat exchangers guided by topology optimization", Appl. Therm. Eng., 161, 114020. https://doi.org/10.1016/j.applthermaleng.2019.114020.
  27. Lazim, T.M., Mat, S. and Saint, H.Y. (2003), "Computational fluid dynamic simulation (CFD) and experimental study on wing-external store aerodynamic interference of a subsonic fighter aircraft", Acta Polytechnica, 43(5). https://doi.org/10.14311/484.
  28. Lefebvre, T., Canard-caruana, S., Le Tallec, C., David, F. and Neuville, N. (2010), "ANIBAL: A new aeroacoustic optimized propeller for light aircraft applications", Proceedings of the 9th AIAA Aviation Technology, Integration, and Operations Conference (ATIO) and Aircraft Noise and Emissions Reduction Symposium (ANERS), Hilton Head, U.S.A., September.
  29. Lefebvre, T., Canard-caruana, S., Le Tallec, C., David, F. and Neuville, N. (2010), "An overview of the ANIBAL project: a new low-noise and efficient propeller for light aircraft applications", Proceedings of the 9th AIAA Aviation Technology, Integration, and Operations Conference (ATIO) and Aircraft Noise and Emissions Reduction Symposium (ANERS), Hilton head, U.S.A., September.
  30. Li, H.B., Sun, Z.L and Peng, X. (2010), "Turbocharger noise prediction using broadband noise source model", J. Beijing Inst. Technol., 19(3), 312-317.
  31. Mahmoudi, J.P. and Khodaparast, M. (2012), "Simulation of sound generated from outlet nozzle jet of an aircraft engine on the aircraft fuselage", Proceedings of the 3rd International Conference on Acoustics and Vibrations, Tehran, Iran, January.
  32. Moayedi, A.M.M. (2016), "Numerical simulation of flow field around re-entry capsule and angle of attacks effect on flow structure", Proceedings of the 1st International Conference on Mechanical and Aerospace Engineering, Tehran, Iran, March.
  33. Mahmood, C.A. and Das, R.K. (2019), "Performance comparison of different winglets by CFD", Proceedings of the 2019 AIP Conference, 2121(1), 060006. AIP Publishing LLC. https://doi.org/10.1063/1.5115907.
  34. Maughmer, M.D., Swan, T.S. and Willits, S.M. (2002), "Design and testing of a winglet airfoil for low-speed aircraft", J. Aircr., 39(4), 654-661. https://doi.org/10.2514/2.2978.
  35. Minelli, G., Yao, H.D., Andersson, N., Hostmad, P., Forssen, J. and Krajnovic, S. (2020), "An aeroacoustic study of the flow surrounding the front of a simplified ICE3 high-speed train model", Appl. Acoust., 160, 107-125. https://doi.org/10.1016/j.apacoust.2019.107125.
  36. Moayedi, M. and Mohammad, M.A. (2019), "Numerical simulation of flow field around space reentry capsule and studying the effects of angle of attack variations on flow structure", J. Technol. Aerosp. Eng., 3(1), 13-19.
  37. Mohamud, O.M. and Johnson, P. (2006), "Broadband noise source models as aeroacoustic tools in designing low NVH HVAC ducts", SAE Technical Paper, 2006-01-1192, 2006. https://doi.org/10.4271/2006-01-1192.
  38. Myilsamy, D., Thirumalay, Y. and Premkumar, P. (2015), "Performance Investigation of an Aircraft Wing at Various Cant Angle of Winglet Using CFD Simulation", Proceedings of the 11th Altair Technology Conference India, Bangalore, India, July.
  39. Nardari, C., Casalino, D., Polidoro, F., Coralic, V., Lew, P.T. and Brodie, J. (2019), "Numerical and experimental investigation of flow confinement effects on UAV rotor noise", Proceedings of the 25th AIAA/CEAS Aeroacoustics Conf, Delft, Netherlands, May.
  40. Ortiz, A.D., Quiroz, L.E. and Kock, R.A. (2002), "Aerodynamic performance analysis of a low-speed acrobatic airplane by numerical simulation", Mecanica Computacional, 1, 378-391.
  41. Pagano, A., Federico, L., Barbarino, M., Guida, F. and Aversano, M. (2008), "Multi-objective aeroacoustic optimization of an aircraft propeller", Proceedings of the 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, Canada, September.
  42. Page, M. (2000), "Aerodynamic design of the Eagle E997 champ car", Proceedings of the 18th Applied Aerodynamics Conference, Denver, U.S.A., August. https://doi.org/10.2514/6.2000-4337.
  43. Park, M.A., Barral, N., Ibanez, D., Kamentskiy, D.S., Krakos, J.A., Michal, T.R. and Loseille, A. (2018), "Unstructured grid adaptation and solver technology for turbulent flows", Proceedings of the 2018 AIAA Aerospace Sciences Meeting, Kissimmee, U.S.A., January.
  44. Pietroniro, A.G., Mihaescu, M., Abom, M. and Knutsson, M. (2018), "A steady-state based investigation of automotive turbocharger compressor noise", SAE Technical Paper, 2018-01-1528, 2018. https://doi.org/10.4271/2018-01-1528.
  45. Rubbert, P. (1990), "The impact of supercomputers on CFD", Comput. Syst. Eng., 1(1), 1-6. https://doi.org/10.1016/0956-0521(90)90043-K.
  46. Sadraey, M.H. (2012), Aircraft Design: A Systems Engineering Approach, John Wiley & Sons, U.S.A.
  47. Shankara, P. and Snyder, D. (2012), "Numerical simulation of high lift trap wing using STAR-CCM+", Proceedings of the 30th AIAA Applied Aerodynamics Conference, New Orleans, U.S.A., June.
  48. Skinner, S.N. and Zare-behtash, H. (2018), "State-of-the-art in aerodynamic shape optimisation methods", Appl. Soft Comput., 62, 933-962. https://doi.org/10.1016/j.asoc.2017.09.030.
  49. Tam, C.K. (1995), "Computational aeroacoustics-Issues and methods", AIAA J., 33(10), 1788-1796. https://doi.org/10.2514/3.12728.
  50. Tinoco, E.N. (2007), "CFD uncertainty and validation for commercial aircraft applications", NATO Symposium AVT, 147, 1-36.
  51. Triet, N.M., Viet, N.N. and Thang, P.M. (2015). "Aerodynamic analysis of aircraft wing", VNU J. Sci. Math. Phys., 31(2).
  52. Tsai, C.H., Fu, L.M., Tai, C.H., Huang, Y.L. and Leong, J.C. (2009), "Computational aero-acoustic analysis of a car with a rear spoiler", Appl. Math. Model., 33(9), 3661-73. https://doi.org/10.1016/j.apm.2008.12.004.
  53. Wilcox, D.C. (1998), Turbulence Modeling For CFD, DCW industries La Canada, Canada.
  54. Ye, X., Li, P., Li, C. and Ding, X. (2015), "Numerical investigation of blade tip grooving effect on performance and dynamics of an axial flow fan", Energy, 82, 556-569. https://doi.org/10.1016/j.energy.2015.01.065.
  55. Yoon, D.H., Kohama, Y. and Kato, T. (2003), "Wing-wing flow interaction of the aero-train", Proceedings of the 56th Annual Meeting of the APS Division of Fluid Dynamics Invited Talks, 56, MM-006, New Jersey, U.S.A., November.
  56. Zhang, L., Dongli, M., Muqing, Y. and Shaoqi, W. (2020), "Optimization and analysis of winglet configuration for solar aircraft", Chinese J. Aeronaut., 33(12), 3238-3252. https://doi.org/10.1016/j.cja.2020.04.008.