DOI QR코드

DOI QR Code

도심 항공 교통을 위한 전기동력 수직 이착륙기의 동축 동회전 로터의 성능해석 연구

Study on Performance Analyses on Coaxial Co-rotating Rotors of e-VTOL Aircraft for Urban Air Mobility

  • Lee, Yu-Been (Department of Aerospace Engineering, Chungnam National University) ;
  • Park, Jae-Sang (Department of Aerospace Engineering, Chungnam National University)
  • 투고 : 2021.10.03
  • 심사 : 2021.11.25
  • 발행 : 2021.12.01

초록

본 연구에서는 회전익기 통합해석 코드인 CAMRAD II를 이용하여 동축 동회전 로터(적층 로터)의 모델링과 제자리 비행 성능해석을 수행하였다. 본 연구는 주요 설계 변수인 방위각 위상차와 상/하단 로터 사이의 간격을 적절히 고려하여 동축 동회전 로터를 모델링하였으며, 기존 동축 반전 로터의 상단 로터의 토크 값을 동축 동회전 로터의 트림 목표 값으로 이용한 트림 기법 및 동축 반전 로터의 전체 추력 값을 트림 목표 값으로 이용한 트림 기법에서 제자리 비행 성능해석을 각각 수행하였다. 토크 트림 기법을 이용하였을 시 전체 로터의 추력은 -10°의 방위각 위상차에서 1.84% 최대화되었고, 추력 트림 기법을 적용하였을 때에는 전체 로터의 동력은 20°의 방위각 위상차에서 4.53%만큼 최소화되었다. 본 연구를 통하여 전기동력 수직 이착륙기에서 활용될 수 있는 동축 동회전 로터의 제자리 비행 성능이 방위각 위상차의 값에 따라 변화될 수 있음을 확인하였다.

This numerical study conducts the modeling and the hover performance analyses of coaxial co-rotating rotor(or stacked rotor), using a rotorcraft comprehensive analysis code, CAMRAD II. The important design parameters such as the index angle and axial spacing for the coaxial co-rotating rotor are varied in this simulation study. The coaxial co-rotating rotor is trimmed using the torque value of the upper rotor of the previous coaxial counter-rotating rotor or the total thrust value of the previous coaxial counter-rotating rotor in hover. The maximum increases in the rotor thrust is 1.84% for the index angle of -10° when using the torque trim approach. In addition, the maximum decreases in the rotor power is 4.53% for the index angle of 20° with the thrust trim method. Thus, the present study shows that the hover performance of the coaxial co-rotating rotor for e-VTOL aircraft can be changed by the index angle.

키워드

과제정보

본 연구는 2020년도 정부(교육부)의 재원으로 한국연구재단의 기초연구사업의 지원을 받아 수행되었습니다(2020R1I1A3071793). 본 논문은 2021년도 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구입니다(2021R1A5A1031868).

참고문헌

  1. Johnson, C., Sirohi, J., Jacobellis, G., Singh, R. and McDonald, R., "Investigation of Stacked Rotor Performance in Hover Part 1: Experimental Measurements," Proceeding of The Advanced Vertical Flight Technical Forum, 2020.
  2. Bain, J., Mikic, G. V. and Stoll, A., "Aerodynamic And Acoustic Design of The Joby Aviation eVTOL Propeller," Proceeding of The Vertical Flight Society's 77th Annual Forum, 2021.
  3. Bhagwat, M., "Co-rotating and Counter-rotating Coaxial Rotor Performance," Proceeding of AHS Aeromechanics Design for Transformative Vertical Flight, 2018.
  4. Jacobellis, G., Singh, R., Johnson, C., Sirohi, J. and McDonald, R., "Investigation of Stacked Rotor Performance in Hover Part 2: Computational Validation," Proceeding of The AHS Aeromechanics Specialists' Forum, 2020.
  5. Uehara, D., Sirohi, J. and Bhagwat, M. J., "Hover Performance of Corotating and Counter-rotating Coaxial Rotors," Journal of the American Helicopter Society, Vol. 65, No. 1, January 2020, pp. 1~8.
  6. Harrington, R. D., "Full-Scale-Tunnel Investigation of the Static-Thrust Performance of a Coaxial Helicopter Rotor," NACA TN 2318, 1951.
  7. Lim, J. W., McAlister, K. W. and Johnson, W., "Hover Performance Correlation for Full-Scale and Model-Scale Coaxial Rotors," Journal of the American Helicopter Society, Vol. 54, No. 3, July. 2009, Article ID 032005.
  8. Go, J. I., Kim, D. H. and Park, J. S., "Performance and Vibration Analyses of Lift-Offset Helicopters," International Journal of Aerospace Engineering, Vol. 2017, June 2017, Article ID 1865751.
  9. Uehara, D. and Sirohi, J., "Quantification of Swirl Recovery in a Coaxial Rotor System," Proceeding of The AHS International 73rd Annual Forum, 2017.