Steel and Composite Structures

  • 제41권5호
  • /
  • Pages.663-679
  • /
  • 2021
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Collapse-resistant performance of a single-story frame assembly and multi-story sub-frame under an internal column-removal scenario

  • Zhong, Wei-hui (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Tan, Zheng (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Tian, Li-min (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Meng, Bao (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Zheng, Yu-hui (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Daun, Shi-chao (School of Civil Engineering, Xi'an University of Architecture and Technology)
  • 투고 : 2021.03.31
  • 심사 : 2021.08.02
  • 발행 : 2021.12.10
⟨ 이전 논문 다음 논문 ⟩

초록

To elucidate the differences in the collapse behavior between a single-story beam-column assembly and multi-story frame, two 1/3-scale two-bay composite frames, including a single-story composite beam-column assembly and a three-story composite sub-frame, were designed and quasi-statically tested. The load-displacement responses, failure modes, and internal force development of the two frames were analyzed and compared in detail. Furthermore, the resistance mechanisms of the two specimens were explored, and the respective contributions of different load-resisting mechanisms to the total resistances were quantitatively separated to gain deeper insights. The experimental tests indicated that Vierendeel action was present in the two-dimensional multi-story frames, which led to an uneven internal force distribution among the three stories. The collapse resistance of TSDWA-3S in the flexural stage was not significantly increased by the structural redundancy provided by the additional story, as compared to that of TSDWA-1S. Although the development of the load response was similar in the two specimens at flexural stage, the collapse mechanisms of the multi-story composite frame were much more complicated than those of the single-story beam-column assembly, and the combined action between stories was critical in determining the internal force redistribution and rebalancing of the remaining structure.

키워드

과제정보

This work was supported by the National Natural Science Foundation of China [grant numbers 51678476, 51608433, 51908449], scientific research plan projects of Shaanxi Education Department [grant number 20JY033, 20JK0713], and the Key Research and Development Project of Shaanxi Province [grant number 2018ZDXM-SF-097]. All opinions, findings, conclusions, and recommendations expressed in this paper are those of the authors and do not necessarily reflect the views of the sponsors.

참고문헌

  1. Alireza, K. and Hossein, O. (2018), "Evaluation of vierendeel peripheral frame as supporting structural element for prevention of progressive collapse" Steel Compos. Struct., 26(5),549-556. https://doi.org/10.12989/scs.2018.26.5.549.
  2. Baghi, H., Oliveira, A., Valenca, J., Cavaco, E., Neves, L. and Julio, E. (2018), "Behavior of reinforced concrete frame with masonry infill wall subjected to vertical load", Eng. Struct., 171, 476-487. https://doi.org/10.1016/j.engstruct.2018.06.001.
  3. Demonceau, J.F. and Jaspart, J.P. (2010), "Experimental test simulating a column loss in a composite frame", Adv. Steel. Constr., 6(3), 891-913. https://doi.org/10.1142/S0578563410002166.
  4. Dinu, F., Marginean, I. and Dubina, D. (2017), "Experimental testing and numerical modelling of steel moment-frame connections under column loss", Eng. Struct., 151, 861-878. https://doi.org/10.1016/j.engstruct.2017.08.068.
  5. DoD (Department of Defense) (2013), Design of buildings to resist progressive collapse. Unified facilities criteria (UFC) 4-023-03. Washington DC: DoD.
  6. Fu, Q.N., Tan, K.H., Zhou, X.H. and Yang, B. (2017), "Load-resisting mechanisms of 3D composite floor systems under internal column-removal scenario", Eng. Struct., 148, 357-372. https://doi.org/10.1016/j.engstruct.2017.06.070.
  7. Fu, Q.N., Yang, B., Hu, Y., Xiong, G., Nie, S.D., Zhang, W.F. and Dai, G.X. (2016), "Dynamic analyses of bolted-angle steel joints against progressive collapse based on component-based model", J. Constr. Steel Res., 117, 161-174. https://doi.org/10.1016/j.jcsr.2015.10.010.
  8. Gao, S. (2014), "Progressive collapse behavior of planar steel frame with composite beam", Ph.D. Dissertation, Harbin Institute of Technology.
  9. GB 50010-2010 (2010), Code for design of concrete structures. Ministry of Housing and Urban Rural Development, Beijing, China.
  10. GB 50017-2017 (2017), Standard for design of steel structures. China Architecture & Building Press, Beijing, China.
  11. GSA (General Services Administration) (2013), Alternate path analysis and design guidelines for progressive collapse resistance. Washington DC, USA: United States General Services Administration.
  12. Guo, L.H., Gao, S., Fu, F. and Wang, Y. (2013), "Experimental study and numerical analysis of progressive collapse resistance of composite frames", J Constr. Steel Res., 89, 236-251. https://doi.org/10.1016/j.jcsr.2013.07.006.
  13. Izzuddin, B.A., Vlassis, A.G., Elghazouli, A.Y. and Nethercot, D.A. (2008), "Progressive collapse of multi-storey buildings due to sudden column loss - Part I: Simplified assessment framework", Eng. Struct., 30(5), 1308-1318. https://doi.org/10.1016/j.engstruct.2007.07.011.
  14. Khorsandnia, N., Valipour, H., Foster, S. and Amin, A. (2017), "Experimental study of progressive collapse resistance of reinforced concrete framed structures", ACI. Struct. J., 114(6), 1385-1396. https://doi.org//10.14359/51689496.
  15. Kiakojouri, F., Biagi, V.D., Chiaia, B. and Sheidaii, M.R. (2020), "Progressive collapse of framed building structures: Current knowledge and future prospects", Eng. Struct., 206,110061. https://doi.org/10.1016/j.engstruct.2019.110061.
  16. Li, G.Q., Zhang, J.Z. and Jiang, J. (2020), "Multi-storey composite framed-structures due to edge-column loss", Adv. Steel. Constr., 16(1), 20-29. https://doi.org/10.18057/IJASC.2020.16.1.3.
  17. Liu, X.G., Zhang, W.P., Gu, X.L. and Ye, Z.W. (2021), "Probability distribution model of stress impact factor for corrosion pits of high-strength prestressing wires", Eng. Struct., 230, 111686. https://doi.org/10.1016/j.engstruct.2020.111686.
  18. Meng, B., Zhong, W.H, Hao, J.P. and Tan, Z. (2019). "Improved steel frame performance against progressive collapse with infill panels", J. Constr. Steel. Res., 158, 201-212. https://doi.org/10.1016/j.jcsr.2019.03.022.
  19. Meng, B., Zhong, W.H, Hao, J.P, Tan, Z. and Wang, L.M. (2020). "Anti-progressive collapse performance analysis of composite frame with openings on beam web", J. Constr. Steel. Res., 173, 106251. https://doi.org/10.1016/j.jcsr.2020.106251.
  20. Meng, B., Li, L.D., Zhong W.H., Tan, Z. and Zheng Y.H. (2021), "Anti-collapse performance analysis of unequal span steel-concrete composite substructures", Steel Compos. Struct., 39(4), 383-399. https://doi.org/10.12989/scs.2021.39.4.383.
  21. Mirtaheri, M. and Abbasi, Z.M. (2016). "Design guides to resist progressive collapse for steel structures", Steel Compos. Struct., 20(2), 357-378. https://doi.org/10.12989/scs.2016.20.2.357.
  22. Qian, K., Lan, X., Li, Z., Li, Y. and Fu, F. (2020). "Progressive collapse resistance of two-storey seismic configured steel sub-frames using welded connections", J. Constr. Steel. Res., 170, 106117. https://doi.org/10.1016/j.jcsr.2020.106117.
  23. Qian, K., Liang, S.L., Fu, F. and Fang, Q. (2019), "Progressive collapse resistance of precast concrete beam-column sub-assemblages with high-performance dry connections", Eng. Struct., 198, 109552. https://doi.org/10.1016/j.engstruct.2019.109552.
  24. Sasani, M. and Sagiroglu, S. (2010), "Gravity load redistribution and progressive collapse resistance of a 20-story reinforced concrete structure following loss of an interior column", ACI. Struct. J., 107(6), 636-644. https://doi.org/10.1016/j.oceaneng.2010.06.006.
  25. Shan, S.D., Li, S., Xu, S., Kose, M.M., Sezen, H. and Wang, S.H. (2019), "Effect of partial infill walls on collapse behavior of reinforced concrete frames", Eng. Struct., 197, 109377. https://doi.org/10.1016/j.engstruct.2019.109377.
  26. Tan, Z., Zhong, W.H., Tian, L.M., Meng, B., Zheng, Y.H., Song, X.Y. and Duan, S.C. (2021), "Quantitative assessment of resistant contributions of two-bay beams with unequal spans", Eng. Struct., 242,112445. https://doi.org/10.1016/j.engstruct.2021.112445.
  27. Tian, L.M., Wei, J.P., Huang, Q.X. and Ju, J.W. (2021a), "Collapse-resistant performance of long-span single-layer spatial grid structures subjected to equivalent sudden joint loads", J. Struct. Eng., 147(1), 04020309. https://doi:10.1061/(ASCE)ST.1943-541X.0002904.
  28. Tian, L.M., He, J.X., Zhang, C.B. and Bai, R. (2021b), "Progressive collapse resistance of single-layer latticed domes subjected to non-uniform snow loads", J. Constr. Steel. Res., 176, 106433. https://doi.org/10.1016/j.jcsr.2020.106433.
  29. Tian, L.M., Kou, Y.F., Lin, H.L. and Li, T.J. (2021c), "Interfacial bond-slip behavior between H-shaped steel and engineered cementitious composites (ECCs)", Eng. Struct., 231, 111731. https://doi.org/10.1016/j.engstruct.2020.111731.
  30. Tsitos, A., Mosqueda, G., Filiatrault, A. and Reinhorn, A.M. (2008), "Experimental investigation of progressive collapse of steel frames under multi-hazard extreme loading", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, October.
  31. Wang, J.J., Wang, W. and Qian, X.D. (2019), "Progressive collapse simulation of the steel-concrete composite floor system considering ductile fracture of steel", Eng. Struct., 200, 109701. https://doi.org/10.1016/j.engstruct.2019.109701.
  32. Wang, W., Fang, C., Qin, X., Chen, Y.Y. and Li, L. (2016), "Performance of practical beam-to-SHS column connections against progressive collapse", Eng. Struct., 106, 332-347. https://doi.org/10.1016/j.engstruct.2015.10.040
  33. Yang, B. and Tan, K.H. (2012), "Numerical analyses of steel beam-column joints subjected to catenary action", J. Constr. Steel Res., 70, 1-11. https://doi.org/10.1016/j.jcsr.2011.10.007.
  34. Yang, B. and Tan, K.H. (2013), "Experimental tests of different types of bolted steel beam-column joints under a central-column-removal scenario", Eng. Struct., 54, 112-130. https://doi.org/10.1016/j.engstruct.2013.03.037.
  35. Yi, W.J., He, Q.F., Xiao, Y. and Kunnath, S.K. (2008). "Experimental study on progressive collapse-resistant behavior of reinforced concrete frame structures", ACI. Struct. J., 105(4), 433-439. https://doi.org/doi:10.1306/03250807070.
  36. Yu, J., Gan, Y.P., Wu, J. and Wu, H. (2019), Effect of concrete masonry infill walls on progressive collapse performance of reinforced concrete infilled frames. Eng. Struct., 191, 179-193. https://doi.org/10.1016/j.engstruct.2019.04.048.
  37. Yuan, Z., Tan, K.H. and Ting, S.K. (2011), Testing of composite steel top-and-seat-and-web angle joints at ambient and elevated temperatures, Part 1: Ambient tests. Eng. Struct., 33(10), 2727-2743. https://doi.org/10.1016/j.engstruct.2011.04.027.
  38. Zhang, W.J., Li, G.Q. and Zhang, J.Z. (2021), "Progressive collapse mechanism of steel framed-structures subjected to a middle-column loss", Adv. Steel. Constr., 17(2), 199-209. https://doi.org/10.18057/IJASC.2021.17.2.9.
  39. Zhong, W.H., Tan, Z., Song, X.Y. and Meng, B. (2019), "Anti-collapse analysis of unequal span steel beam-column substructure considering the composite effect of floor slabs", Adv. Steel. Constr., 15(4), 377-385. https://doi.org/10.18057/IJASC.2019.15.4.8.
  40. Zhong, W.H., Tan, Z., Tian, L.M., Meng, B., Song, X.Y. and Zheng, Y.H. (2020), "Collapse resistance of composite beam-column assemblies with unequal spans under an internal column-removal scenario", Eng. Struct., 206,110143. https://doi.org/10.1016/j.engstruct.2019.110143.