과제정보
This work was supported by the Dong-A University research fund.
참고문헌
- Choi, J.E., Min, K.-S., Kim, J.H., Lee, S.B., Seo, H.W., 2010. Resistance and propulsion characteristics of various commercial ships based on CFD results. Ocean Eng. 37, 549-566. https://doi.org/10.1016/j.oceaneng.2010.02.007
- De Tullio, N., Paredes, P., Sandham, N.D., Theofilis, V., 2013. Laminar-turbulent transition induced by a discrete roughness element in a supersonic boundary layer. J. Fluid Mech. 735, 613-646. https://doi.org/10.1017/jfm.2013.520
- Doolittle, C.J., Drews, S.D., Goldstein, D.B., 2014. Near-field flow structures about subcritical surface roughness. Phys. Fluids 26 (12), 124106. https://doi.org/10.1063/1.4903306
- Dewanda, P.A., 1999. reportCorrelation Studies in the Daltech Towing Tank for Three Series 63 Models. M.S. Thesis, Mechanical Engineering (Naval Architecture), Dalhouse University-Daltech.
- Eca, L., Hoekstra, M., Roache, P.J., 2007. Verification of calculations: an overview of the 2nd Lisbon workshop. AIAA Paper No. 2007-4089, 2nd Workshop on CFD Uncertainty Analysis, AIAA Computational Fluid Dynamics Conference, Miami, June 2007.
- Fransson, J.H., Brandt, L., Talamelli, A., Cossu, C., 2004. Experimental and theoretical investigation of the nonmodal growth of steady streaks in a flat plate boundary layer. Phys. Fluids 16 (10), 3627-3638. https://doi.org/10.1063/1.1773493
- Fransson, J.H., Brandt, L., Talamelli, A., Cossu, C., 2005. Experimental study of the stabilization of Tollmien-Schlichting waves by finite amplitude streaks. Phys. Fluids 17 (5), 054110. https://doi.org/10.1063/1.1897377
- Hughes, G., Allan, J.F., 1951. Turbulence stimulation on ship models. Transactions SNAME 59, 281-314.
- ITTC, 2002. Recommended Procedures 7.5-01-01-01 Ship Models, 23rd ITTC.
- Iyer, P.S., Mahesh, K., 2013. High-speed boundary-layer transition induced by a discrete roughness element. J. Fluid Mech. 729, 524-562. https://doi.org/10.1017/jfm.2013.311
- Jeong, J., Hussain, F., 1995. On the identification of a vortex. J. Fluid Mech. 285, 69-94. https://doi.org/10.1017/S0022112095000462
- Lee, S.B., 2016. A study on temporal accuracy of OpenFOAM. International Journal of Naval Architecture and Ocean Engineering 9 (4), 429-438. https://doi.org/10.1016/j.ijnaoe.2016.11.007
- Lee, S.B., Lee, Y.M., 2014. Statistical reliability analysis of numerical simulation for prediction of model-ship resistance (in Korean). Journal of the Society of Naval Architects of Korea 51 (4), 321-327. https://doi.org/10.3744/SNAK.2014.51.4.321
- Loiseau, J.C., Robinet, J.C., Cherubini, S., Leriche, E., 2014. Investigation of the roughness-induced transition: global stability analyses and direct numerical simulations. J. Fluid Mech. 760, 175-211. https://doi.org/10.1017/jfm.2014.589
- MEPC.1/Circ.850/Rev.1, 2015. Interim Guidelines for Determining Minimum Propulsion Power to Maintain the Manoeuvrability of Ships in Adverse Conditions, (as amended).
- Moin, P., Kim, J., 1982. Numerical investigation of turbulent channel flow. J. Fluid Mech. 118, 341-377. https://doi.org/10.1017/S0022112082001116
- Murphy, J.C., 2010. A novel approach to turbulence stimulation for ship-model testing. Technical Report DTIC Document.
- National physical laboratory, 1960. Standard procedure for resistance and propulsion experiments with ship models. NPL Report SHR 10/59 Revised.
- Park, S., Park, S.W., Rhee, S.H., Lee, S.B., Choi, J.-E., Kang, S.H., 2013. Investigation on the wall function implementation for the prediction of ship resistance. International Journal of Naval Architecture and Ocean Engineering 5, 33-46. https://doi.org/10.3744/JNAOE.2013.5.1.033
- Roache, P.J., 2003. Conservation of the GCI in finite volume computations on steady state fluid flow and heat transfer. J. Fluid Eng. 125, 731-732. https://doi.org/10.1115/1.1588692
- Schlatter, P., Li, Q., Brethouwer, G., Johansson, A.V., Henningson, D.S., 2010. Simulations of spatially evolving turbulent boundary layer up to Reθ=4300. Int. J. Heat Fluid Flow 31 (3), 251-261. https://doi.org/10.1016/j.ijheatfluidflow.2009.12.011
- Shrestha, P., Candler, G.V., 2019. Direct numerical simulation of high-speed transition due to roughness elements. J. Fluid Mech. 868, 762-788. https://doi.org/10.1017/jfm.2019.179
- Spalart, P.R., 1988. Direct simulation of a turbulent boundary layer up to Reθ=1410. J. Fluid Mech. 187, 61-98. https://doi.org/10.1017/S0022112088000345
- Subbareddy, P.K., Bartkowicz, M.D., Candler, G.V., 2014. Direct numerical simulation of high-speed transition due to an isolated roughness element. J. Fluid Mech. 748, 848-878. https://doi.org/10.1017/jfm.2014.204
- Tirtey, S.C., Chazot, O., Walpot, L., 2011. Characterization of hypersonic roughness-induced boundary-layer transition. Exp. Fluid 50 (2), 407-418. https://doi.org/10.1007/s00348-010-0939-4
- Van den Eynde, J.P., Sandham, N.D., 2016. Numerical simulations of transition due to isolated roughness elements at Mach 6. AIAA J. 54 (1), 53-65. https://doi.org/10.2514/1.J054139
- Xing, T., Stern, F., 2008. reportFactors of Safety for Richardson Extrapolation for Industrial Applications. IHHR Technical Report 466.