DOI QR코드

DOI QR Code

Numerical simulation of 2-D fluid-structure interaction with a tightly coupled solver and establishment of the mooring model

  • Tsai, I-Chen (Department of Hydraulic and Ocean Engineering, National Cheng Kung University) ;
  • Li, Sing-Ya (Department of Hydraulic and Ocean Engineering, National Cheng Kung University) ;
  • Hsiao, Shih-Chun (Department of Hydraulic and Ocean Engineering, National Cheng Kung University) ;
  • Hsiao, Yu (Department of Hydraulic and Ocean Engineering, National Cheng Kung University)
  • Received : 2021.03.15
  • Accepted : 2021.06.10
  • Published : 2021.11.30

Abstract

In this study, a newly enhanced Fluid-Structure Interaction (FSI) model which incorporates mooring lines was used to simulate a floating structure. The model has two parts: a Computational Fluid Dynamics (CFD) model and a mooring model. The open-source CFD OpenFOAM® v1712 toolbox was used in the present study, and the convergence criteria and relaxation method were added to the computational procedure used for the OpenFOAM multiphase flow solver, interDyMFoam. A newly enhanced, tightly coupled solver, CoupledinterDyMFoam, was used to decrease the artificial added mass effect, and the results were validated through a series of benchmark cases. The mooring model, based on the finite element method, was established in MATLAB® and was validated against a benchmark analytical elastic catenary solution and numerical results. Finally, a model which simulates a floating structure with mooring lines was successfully constructed by connecting the mooring model to CoupledinterDyMFoam.

Keywords

Acknowledgement

This research was financially supported by the Ministry of Science and Technology, Taiwan, under grants MOST 108-2221-E-006 -087 -MY3 and MOST 109-2217-E-006 -002 -MY3.

References

  1. Chen, L., Sun, L., Zang, J., Hillis, A.J., Plummer, A.R., 2016. Numerical study of roll motion of a 2-D floating structure in viscous flow. J. Hydrodyn. 28 (4), 544-563. https://doi.org/10.1016/S1001-6058(16)60659-5.
  2. Chow, J.H., Ng, E.Y.K., 2016. Strongly coupled partitioned six degree-of-freedom rigid body motion solver with Aitken's dynamic under-relaxation. Int. J. Naval Architect. Ocean Eng. 8 (4), 320-329. https://doi.org/10.1016/j.ijnaoe.2016.04.001.
  3. Davidson, J., Ringwood, J.V., 2017. Mathematical modelling of mooring systems for wave energy converters - a review. Energies 10 (5). https://doi.org/10.3390/en10050666.
  4. Devolder, B., Schmitt, P., Rauwoens, P., Elsaesser, B., Troch, P., 2015. A Review of the Implicit Motion Solver Algorithm in OpenFOAM® to Simulate a Heaving Buoy. 18th Numerical Towing Tank Symposium.
  5. Dunbar, A.J., Craven, B.A., Paterson, E.G., 2015. Development and validation of a tightly coupled CFD/6-DOF solver for simulating floating offshore wind turbine platforms. Ocean Eng. 110, 98-105. https://doi.org/10.1016/j.oceaneng.2015.08.066.
  6. Forster, C., Wall, W.A., Ramm, E., 2007. Artificial added mass instabilities in sequential staggered coupling of nonlinear structures and incompressible viscous flows. Comput. Methods Appl. Mech. Eng. 196 (7), 1278-1293. https://doi.org/10.1016/j.cma.2006.09.002.
  7. Hou, G., Wang, J., Layton, A., 2012. Numerical methods for fluid-structure interaction - a review. Commun. Comput. Phys. 12 (2), 337-377. https://doi.org/10.4208/cicp.291210.290411s.
  8. Hsiao, Y., Tsai, C.L., Chen, Y.L., Wu, H.L., Hsiao, S.C., 2020. Simulation of wave-current interaction with a sinusoidal bottom using OpenFOAM. Appl. Ocean Res. 94, 101998. https://doi.org/10.1016/j.apor.2019.101998
  9. Ito, S., 1977. Study of the Transient Heave Oscillation of a Floating Cylinder. Massachusetts Institute of Technology.
  10. Joung, T.H., Sammut, K., He, F., Lee, S.K., 2012. Shape optimization of an autonomous underwater vehicle with a ducted propeller using computational fluid dynamics analysis. Int. J. Naval Architect. Ocean Eng. 4 (1), 44-56. https://doi.org/10.3744/JNAOE.2012.4.1.044
  11. Jung, K.H., Chang, K.-A., Jo, H.J., 2006. Viscous effect on the roll motion of a rectangular structure. J. Eng. Mech. 132 (2), 190-200. https://doi.org/10.1061/(asce)0733-9399(2006)132:2(190)
  12. Kim, M., Jung, K.H., Park, S.B., Lee, G.N., Duong, T.T., Suh, S.B., Park, I.R., 2020. Experimental and numerical estimation on roll damping and pressure on a 2-D rectangular structure in free roll decay test. Ocean Eng. 196, 106801. https://doi.org/10.1016/j.oceaneng.2019.106801
  13. Koo, W., Kim, J.D., 2015. Simplified formulas of heave added mass coefficients at high frequency for various two-dimensional bodies in a finite water depth. Int. J. Naval Architect. Ocean Eng. 7 (1), 115-127. https://doi.org/10.1515/ijnaoe-2015-0009
  14. Kuttler, U., Wall, W.A., 2008. Fixed-point fluid-structure interaction solvers with dynamic relaxation. Comput. Mech. 43 (1), 61-72. https://doi.org/10.1007/s00466-008-0255-5.
  15. Lara, J.L., Di Paolo, B., Barajas, G., Losada, I.J., 2018. Wave and current interaction with moored floating bodies using overset method. In: The 13th OpenFOAM Workshop. Shanghai, China.
  16. Luongo, A., Zulli, D., 2013. Mathematical models of beams and cables. In: Mathematical Models of Beams and Cables. https://doi.org/10.1002/9781118577554.
  17. Malta, E.B., Goncalves, R.T., Matsumoto, F.T., Pereira, F.R., Fujarra, A.L.C., Nishimoto, K., 2010. Damping coefficient analyses for floating offshore structures. In: Proceedings of the 29th International Conference on Offshore Mechanics and Arctic Engineering. Shanghai, China. OMAE2010-20093.
  18. Mavrakos, S.A., Papazoglou, V.J., Triantafyllou, M.S., Hatjigeorgiou, J., 1996. Deep water mooring dynamics. Mar. Struct. 9 (2), 181-209. https://doi.org/10.1016/0951-8339(94)00019-O.
  19. Maza, M., Lara, J.L., Losada, I.J., 2013. A coupled model of submerged vegetation under oscillatory flow using NaviereStokes equations. Coast. Eng. 80, 16-34. https://doi.org/10.1016/j.coastaleng.2013.04.009
  20. Newmark, N.M., 1959. A method of computation for structural dynamics. J. Eng. Mech. Div. 85 (3), 67-94. https://doi.org/10.1061/JMCEA3.0000098
  21. Niewiarowski, A., Adriaenssens, S., Pauletti, R.M., Addi, K., Deike, L., 2018. Modeling underwater cable structures subject to breaking waves. Ocean Eng. 164 (June), 199-211. https://doi.org/10.1016/j.oceaneng.2018.06.013.
  22. OpenCFD, 2020. OpenFOAM: the Open Source CFD Toolbox: User Guide.
  23. Pinguet, R., Kanner, S., Benoit, M., Molin, B., 2020. Validation of open-source overset mesh method using free-decay tests of floating offshore wind turbine. In: The 30th International Ocean and Polar Engineering Conference. International Society of Offshore and Polar Engineers.
  24. Pomeranz, S.B., 2017. Aitken's D2 method extended. Cog. Math. 4 (1) https://doi.org/10.1080/23311835.2017.1308622.
  25. Ransley, E.J., Greaves, D., Raby, A., Simmonds, D., Hann, M., 2017. Survivability of wave energy converters using CFD. Renew. Energy 109, 235-247. https://doi.org/10.1016/j.renene.2017.03.003.
  26. van Loon, R., Anderson, P.D., van de Vosse, F.N., Sherwin, S.J., 2007. Comparison of various fluid-structure interaction methods for deformable bodies. Comput. Struct. 85 (11-14), 833-843. https://doi.org/10.1016/j.compstruc.2007.01.010.
  27. Wu, Y.T., Hsiao, S.C., Huang, Z.C., Hwang, K.S., 2012. Propagation of solitary waves over a bottom-mounted barrier. Coast. Eng. 62, 31-47. https://doi.org/10.1016/j.coastaleng.2012.01.002
  28. Yvin, C., Leroyer, A., Visonneau, M., Queutey, P., 2018. Added mass evaluation with a finite-volume solver for applications in fluidestructure interaction problems solved with co-simulation. J. Fluid Struct. 81, 528-546. https://doi.org/10.1016/j.jfluidstructs.2018.05.008.