DOI QR코드

DOI QR Code

Blast fragility of base-isolated steel moment-resisting buildings

  • Dadkhah, Hamed (Department of Civil Engineering, Faculty of Engineering, University of Mohaghegh Ardabili) ;
  • Mohebbi, Mohtasham (Department of Civil Engineering, Faculty of Engineering, University of Mohaghegh Ardabili)
  • 투고 : 2021.01.12
  • 심사 : 2021.08.26
  • 발행 : 2021.11.25

초록

Strategic structures are a potential target of the growing terrorist attacks, so their performance under explosion hazard has been paid attention by researchers in the last years. In this regard, the aim of this study is to evaluate the blast-resistance performance of lead-rubber bearing (LRB) base isolation system based on a probabilistic framework while uncertainties related to the charge weight and standoff distance have been taken into account. A sensitivity analysis is first performed to show the effect of explosion uncertainty on the response of base-isolated buildings. The blast fragility curve is then developed for three base-isolated steel moment-resisting buildings with different heights of 4, 8 and 12 stories. The results of sensitivity analysis show that although LRB has the capability of reducing the peak response of buildings under explosion hazard, this control system may lead to increase in the peak response of buildings under some explosion scenarios. This shows the high importance of probabilistic-based assessment of isolated structures under explosion hazard. The blast fragility analysis shows effective performance of LRB in mitigating the probability of failure of buildings. Therefore, LRB can be introduced as effective control system for the protection of buildings from explosion hazard regarding uncertainty effect.

키워드

참고문헌

  1. Abdollahzadeh, G., Nemati, M. and Avazeh, M. (2016), "Probability assessment and risk management of progressive collapse in strategic buildings facing blast loads", Civil Eng. Infrastruct. J., 49(2), 327-338. https://dx.doi.org/10.7508/ceij.2016.02.009.
  2. ASCE 7-10 (2010), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, Reston, VA.
  3. Ashkezari, G.D. (2018), "A performance based strategy for design of steel moment frames under blast loading", Earthq. Struct., 15(2), 155-164. https://doi.org/10.12989/eas.2018.15.2.155.
  4. Bai, J., Yang, T. and Ou, J. (2018), "Improved performance-based plastic design for RC moment resisting frames: Development and a comparative case study", Int. J. Struct. Stab. Dyn., 18(4), 1850050. https://doi.org/10.1142/S0219455418500505.
  5. Bisch, P., Carvalho, E., Degee, H., Fajfar, P., Fardis, M., Franchin, P. and Tsionis, G. (2012), Eurocode 8: Seismic Design of Buildings Worked Examples. Luxembourg: Publications Office of the European Union.
  6. Brode, H.L. (1955), "Numerical solutions of spherical blast waves", J. Appl. Phys., 26(6), 766-775. https://doi.org/10.1063/1.1722085.
  7. Bulson, P.S. (2002), Explosive Loading of Engineering Structures, CRC Press, London.
  8. Chen, W. and Hao, H. (2013), "Numerical study of blast-resistant sandwich panels with rotational friction dampers", Int. J. Struct. Stab. Dyn., 13(06), 1350014. https://doi.org/10.1142/S0219455413500144.
  9. Clemente, P., Bongiovanni, G., Buffarini, G., Saitta, F., Castellano, M.G. and Scafati, F. (2019), "Effectiveness of HDRB isolation systems under low energy earthquakes", Soil Dyn. Earthq. Eng., 118, 207-220. https://doi.org/10.1016/j.soildyn.2018.12.018.
  10. Coffield, A. and Adeli, H. (2014), "An investigation of the effectiveness of the framing systems in steel structures subjected to blast loading", J. Civ. Eng. Manag., 20(6), 767-777. https://doi.org/10.3846/13923730.2014.986667.
  11. Coffield, A. and Adeli, H. (2016), "Irregular steel building structures subjected to blast loading", J. Civ. Eng. Manag., 22(1), 17-25. https://doi.org/10.3846/13923730.2015.1073172.
  12. Constantinou, M., Whittaker, A., Fenz, D. and Apostolakis, G. (2007), "Seismic isolation of bridges", University at Buffalo, New York.
  13. Constantinou, M.C., Whittaker, A., Kalpakidis, Y., Fenz, D. and Warn, G.P. (2006), "Performance of seismic isolation hardware under service and seismic loading", University at Buffalo, New York.
  14. Dadkhah, H. and Mohebbi, M. (2019), "Performance assessment of an earthquake-based optimally designed fluid viscous damper under blast loading", Advan. Struct. Eng., 22(14), 3011-3025. https://doi.org/10.1177%2F1369433219855905. https://doi.org/10.1177%2F1369433219855905
  15. De Luca, A. and Guidi, L.G. (2020), "Base isolation issues in Italy: Integrated architectural and structural designs", Soil Dyn. Earthq. Eng., 130, 105912. https://doi.org/10.1016/j.soildyn.2019.105912.
  16. Erdik, M., U lker, O ., Sadan, B. and Tuzun, C. (2018), "Seismic isolation code developments and significant applications in Turkey", Soil Dyn. Earthq. Eng., 115, 413-437. https://doi.org/10.1016/j.soildyn.2018.09.009.
  17. Eurocode 8 (2005), Design of Structures for Earthquake Resistance-part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization, Brussels.
  18. Fan, B., Zhang, X.a., Abdulhadi, M. and Wang, Z. (2020), "Generic optimization, energy analysis, and seismic response study for MSCSS with rubber bearings", Earthq. Struct., 19(5), 347-359. https://doi.org/10.12989/eas.2020.19.5.347.
  19. FEMA 356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, American Society of Civil Engineers, Washington, D.C.
  20. Gardoni, P. and Trejo, D. (2013), "Probabilistic seismic demand models and fragility estimates for reinforced concrete bridges with base isolation", Earthq. Struct., 4(5), 527-555. https://doi.org/10.12989/eas.2013.4.5.527.
  21. Goel, S.C. and Chao, S.H. (2008), Performance-Based Plastic Design: Earthquake-Resistant Steel Structures, International Code Council, Washington, D.C.
  22. Islam, A., Jumaat, M.Z. and Ahmmad, R. (2015), "Retrofitting of vulnerable RC structures by base isolation technique", Earthq. Struct., 9(3), 603-623. https://doi.org/10.12989/eas.2015.9.3.603.
  23. Iwabe, N., Takayama, M., Kani, N. and Wada, A. (2000), "Experimental study on the effect of tension for rubber bearings", 12th World Conference on Earthquake Engineering (WCEE), Auckland, New Zealand, January.
  24. Jangid, R. (2008), "Equivalent linear stochastic seismic response of isolated bridges", J. Sound Vib., 309(3-5), 805-822. https://doi.org/10.1016/j.jsv.2007.07.071.
  25. Jangid, R. (2010), "Stochastic response of building frames isolated by lead-rubber bearings", Struct. Control Health Monit., 17(1), 1-22. https://doi.org/10.1002/stc.266.
  26. Kangda, M.Z. and Bakre, S. (2018), "The effect of LRB parameters on structural responses for blast and seismic loads", Arab. J. Sci. Eng., 43(4), 1761-1776. https://doi.org/10.1007/s13369-017-2732-7.
  27. Kangda, M.Z. and Bakre, S. (2019), "Positive-Phase Blast Effects on Base-Isolated Structures", Arab. J. Sci. Eng., 44(5), 4971-4992. https://doi.org/10.1007/s13369-018-3667-3.
  28. Kangda, M.Z. and Bakre, S. (2020), "Performance evaluation of moment-resisting steel frame buildings under seismic and blast-induced vibrations", J. Vib. Eng. Technol., 8(1), 1-26. https://doi.org/10.1007/s42417-018-0027-2.
  29. Khan, S., Saha, S.K., Matsagar, V.A. and Hoffmeister, B. (2017), "Fragility of steel frame buildings under blast load", J. Perform. Constr. Fac., 31(4), 04017019. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001016.
  30. Khansefid, A., Maghsoudi-Barmi, A. and Khaloo, A. (2019), "Seismic protection of LNG tanks with reliability based optimally designed combined rubber isolator and friction damper", Earthq. Struct., 16(5), 523-532. https://doi.org/10.12989/eas.2019.16.5.523.
  31. Kiran, K. and Kori, J. (2019), "Blast mitigation of low rise structure by using control devices", VTU J. Eng. Sci. Manage., 1(3), 22-28. http://ijesm.vtu.ac.in/index.php/IJESM/article/view/86.
  32. Li, Y., Lv, Z. and Wang, Y. (2020), "Blast response of aluminum foam sandwich panel with double V-shaped face plate", Int. J. Impact. Eng., 144, 103666. https://doi.org/10.1016/j.ijimpeng.2020.103666.
  33. Liu, Y., Liao, Z., Xue, Y., Li, Z., Shao, L. and Tang, D. (2020), "Experimental and theoretical analysis for isolation performance of new combined isolation devices under blast loading", Advan. Civ. Eng., 2020, 8425785. https://doi.org/10.1155/2020/8425785.
  34. Losanno, D., Hadad, H. and Serino, G. (2019), "Design charts for eurocode-based design of elastomeric seismic isolation systems", Soil Dyn. Earthq. Eng., 119, 488-498. https://doi.org/10.1016/j.soildyn.2017.12.017.
  35. Mahmoud, S. (2014), "Blast load induced response and the associated damage of buildings considering SSI", Earthq. Struct., 7(3), 231-252. http://dx.doi.org/10.12989/eas.2014.7.3.349.
  36. Mahmoud, S. (2019), "Blast-load-induced interaction between adjacent multi-story buildings", Earthq. Struct., 17(1), 17-29. https://doi.org/10.12989/eas.2019.17.1.017.
  37. Markou, A.A., Stefanou, G. and Manolis, G.D. (2019), "Stochastic energy measures for hybrid base isolation systems", Soil Dyn. Earthq. Eng., 119, 454-470. https://doi.org/10.1016/j.soildyn.2018.01.027.
  38. Mazzoni, S., McKenna, F., Scott, M.H. and Fenves, G.L. (2006), "OpenSees command language manual", University of California, Berkeley, CA.
  39. Mills, C. (1987), "The design of concrete structure to resist explosions and weapon effects", Proceedings of the 1st Int. Conference on Concrete for Hazard Protections, Edinburgh.
  40. Miyamoto, H.K. and Taylor, D. (2000), "Structural control of dynamic blast loading", Structures Congress 2000, Philadelphia, Pennsylvania, May.
  41. Mohebbi, M. and Dadkhah, H. (2017), "Performance of semi-active base isolation systems under external explosion", Int. J. Struct. Stab. Dyn., 17(10), 1750112. http://dx.doi.org/10.1142/S0219455418500256.
  42. Mohebbi, M. and Dadkhah, H. (2019), "Optimal smart base isolation system for multiple earthquakes", Int. J. Optim. Civil. Eng., 9(1), 19-37. http://ijoce.iust.ac.ir/article-1-373-en.html.
  43. Mohebbi, M. and Dadkhah, H. (2020), "Optimal design of base isolation system under blast loading", Int. J. Optim. Civil. Eng., 10(1), 101-115. http://ijoce.iust.ac.ir/article-1-424-en.html.
  44. Monir, H.S. (2013), "Flexible blast resistant steel structures by using unidirectional passive dampers", J. Constr. Steel Res., 90, 98-107. https://doi.org/10.1016/j.jcsr.2013.07.025.
  45. Murase, M., Tsuji, M. and Takewaki, I. (2013), "Smart passive control of buildings with higher redundancy and robustness using base-isolation and inter-connection", Earthq. Struct., 4(6), 649-670. http://dx.doi.org/10.12989/eas.2013.4.6.649.
  46. Nagarajaiah, S. and Sun, X. (2001), "Base-isolated FCC building: impact response in Northridge earthquake", J. Struct. Eng., 127(9), 1063-1075. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(1063).
  47. Nagarajaiah, S. and Xiaohong, S. (2000), "Response of base-isolated USC hospital building in Northridge earthquake", J. Struct. Eng., 126(10), 1177-1186. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:10(1177).
  48. National Research Council (2010), Technologies and Approaches to Reducing the Fuel Consumption of Medium-and Heavy-Duty Vehicles, National Academies Press, Washington, D.C.
  49. Naumyenko, I. and Petrovsky, I. (1956), The Shock Wave of A Nuclear Explosion, BOEH, CCCP, Moscow.
  50. Oliveto, N.D., Markou, A.A. and Athanasiou, A. (2019), "Modeling of high damping rubber bearings under bidirectional shear loading", Soil Dyn. Earthq. Eng., 118, 179-190. https://doi.org/10.1016/j.soildyn.2018.12.017.
  51. Pigouni, A.E., Castellano, M.G., Infanti, S. and Colato, G.P. (2020), "Full-scale dynamic testing of pendulum isolators (Curved surface sliders)", Soil Dyn. Earthq. Eng., 130, 105983. https://doi.org/10.1016/j.soildyn.2019.105983.
  52. Priestley, M.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement-Based Seismic Design Of Structures, IUSS press, Pavia, Italy.
  53. Reddy, N.O. and Manchalwar, A. (2019), "Performance of moment resisting RC building equipped with X-plate damper under seismic and blast loading", Int. J. Innov. Technol. Explor. Eng., 9(2), 2758-2762. https://doi.org/10.35940/ijitee.b6614.129219.
  54. Reddy, N.O. and Manchalwar, A. (2020), "Performance of 2-D Frame Equipped With Base isolation System under Dynamic Loadings", 2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy, Hyderabad, India.
  55. Robinson, W. and Tucker, A. (1976), "A lead-rubber shear damper", Bull. N.Z. Natl. Soc. Earthqu. Eng., 4, 251-259.
  56. Robinson, W.H. (1982), "Lead-rubber hysteretic bearings suitable for protecting structures during earthquakes", Earthq. Eng. Struct. Dyn., 10(4), 593-604. https://doi.org/10.1002/eqe.4290100408.
  57. Sahu, D.K. and Patro, S.K. (2018), "Performance of energy dissipation devices in mitigation of blast-induced vibration of buildings", ASCE India Conference 2017, New Delhi, India. https://doi.org/10.1061/9780784482032.047.
  58. Shi, Y. and Stewart, M.G. (2015), "Damage and risk assessment for reinforced concrete wall panels subjected to explosive blast loading", Int. J. Impact. Eng., 85, 5-19. https://doi.org/10.1016/j.ijimpeng.2015.06.003.
  59. Shoji, G., Saito, K., Kameda, T., and Fueki, T.A. (2004), "Seismic performance of a laminated rubber bearing under tensile axial loading", Proceedings of 13th World Conference on Earthquake Engineering, Vancouver, Canada, August.
  60. Sun, G., Zhang, J., Li, S., Fang, J., Wang, E. and Li, Q. (2019), "Dynamic response of sandwich panel with hierarchical honeycomb cores subject to blast loading", Thin-Walled Struct., 142, 499-515. https://doi.org/10.1016/j.tws.2019.04.029.
  61. Tetougueni, C.D., Zampieri, P. and Pellegrino, C. (2020), "Structural performance of a steel cable-stayed bridge under blast loading considering different stay patterns", Eng. Struct., 219, 110739. https://doi.org/10.1016/j.engstruct.2020.110739.
  62. Tyler, R. and Robinson, W. (1984), "High-strain tests on lead-rubber bearings for earthquake loadings", Earthq. Eng., 17(2), 90-105.
  63. UFC 3-340-02 (2008), "Structures to resist the effects of accidental explosions", US Department of Defense, U.S.A.
  64. Wang, Y. and Liew, J.R. (2015), "Blast performance of water tank with energy absorbing support", Thin-Walled Struct., 96, 1-10. https://doi.org/10.1016/j.tws.2015.07.022.
  65. Warn, G.P. and Whittaker, A.S. (2006), "A study of the coupled horizontal-vertical behavior of elastomeric and lead-rubber seismic isolation bearings", MCEER-06-0011; State University of New York, New York, U.S.A.
  66. Wierschem, N.E., Hubbard, S.A., Luo, J., Fahnestock, L.A., Spencer Jr, B.F., Quinn, D.D. and Bergman, L.A. (2013), "Experimental blast testing of a large 9-story structure equipped with a system of nonlinear energy sinks", International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Vienna, Austria, August.
  67. Yussof, M.M., Silalahi, J.H., Kamarudin, M.K., Chen, P.-S. and Parke, G.A. (2020), "Numerical Evaluation of Dynamic Responses of Steel Frame Structures with Different Types of Haunch Connection Under Blast Load", Appl. Sci., 10(5), 1815. https://doi.org/10.3390/app10051815.
  68. Zhang, L., Chen, L., Fang, Q. and Zhang, Y.D. (2016), "Mitigation of blast loadings on structures by an anti-blast plastic water wall", J. Cent. South. Univ., 23(2), 461-469. https://doi.org/10.1007/s11771-016-3091-3.
  69. Zhang, R. and Phillips, B.M. (2015), "Performance and protection of base-isolated structures under blast loading", J. Eng. Mech., 142(1), 04015063. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000974.
  70. Zordan, T., Liu, T., Briseghella, B. and Zhang, Q. (2014), "Improved equivalent viscous damping model for base-isolated structures with lead rubber bearings", Eng. Struct., 75, 340-352. https://doi.org/10.1016/j.engstruct.2014.05.044.