Geomechanics and Engineering

  • 제27권6호
  • /
  • Pages.573-582
  • /
  • 2021
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of bound water on mechanical properties of typical subgrade soils in southern China

  • Ding, Le (National Engineering Laboratory of Highway Maintenance Technology, Changsha University of Science & Technology) ;
  • Zhang, Junhui (National Engineering Laboratory of Highway Maintenance Technology, Changsha University of Science & Technology) ;
  • Deng, Zonghuang (Jiangxi Tianchi Expressway High-Tech Development Co., Ltd., Jiangxi Provincial Expressway Investment Group, Co., Ltd)
  • 투고 : 2020.05.20
  • 심사 : 2021.12.01
  • 발행 : 2021.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

From the effect of bound water, this study aims to seek the potential reasons for difference of mechanical experiment results of subgrades soils. To attain the comparatively test condition of bound water, dry forming (DF) and wet forming (WF) were used in the specimen forming process before testing, series of laboratory tests, i.e., CBR tests, direct shear tests and compaction tests. The measured optimal moisture contents, maximum dry densities, CBR, cohesion c, and internal friction angle 𝜑 were given contrastive analysis. Then to detect the adsorptive bound water in the subgrade soils, the thermal gravimetric and differential scanning calorimetry (TG-DSC) test were employed under different heating rates. The free water, loosely bound water and tightly bound water in soils were qualitatively and quantitatively analyzed. It was found that due to the different dehydration mechanics, the lost bound water in DF and WF process show their own characteristics. This may lead to the different mechanical properties of tested soils. The clayey particles have a great influence on the bound water adsorbed ability of subgrade soils. The more the clay content, the greater the difference of mechanical properties tested between the two forming methods. Moreover, in highway construction of southern China, the wet forming method is recommended for its higher authenticity in simulating the subgrade filed humidity.

키워드

과제정보

The authors gratefully acknowledge the financial support offered by the National Science Fund for Distinguished Young Scholars (52025085), National Natural Science Foundation of China (51878078), Training Program for High-level Technical Personnel in Transportation Industry (2018-025). The Science and Technology Innovation Program of Hunan Province (2020RC4048). Key Research Program of Hunan Province(2022SK2083).

참고문헌

  1. Caurie, M. (2011), "Bound water: its definition, estimation and characteristics", Int. J. Food Sci. Technol. 46(5), 930-934, http://doi.org/10.1111/j.1365-2621.2011.02581.x.
  2. Costa, A.C.S., Bigham, J.M., Tormena, C.A., Pintro, J.C. (2004), "Clay mineralogy and cation exchange capacity of Brazilian soils from water contents determined by thermal analysis", Thermochim. Acta, 413(1), 73-79. http://doi.org/10.1016/j.tca.2003.10.009.
  3. Hilhorst, M.A., Dirksen, C., Kampers, F.W.H. and Feddes, R.A. (2001), "Dielectric Relaxation of Bound Water versus Soil Matric Pressure", Soil Sci. Soc. Am. J., 65(2), 311-314. http://doi.org/10.2136/sssaj2001.652311x.
  4. Hoeg, S., Scholer, H.F. and Warnatz, J. (2004), "Assessment of interfacial mass transfer in water-unsaturated soils during vapor extraction", J. Contam. Hydrol., 74(1-4), 163-195. http://doi.org/10.1016/j.jconhyd.2004.02.010.
  5. Kasprzhitskii, A.S., Lazorenko, G.I., Sulavko, S.N., Yavna, V.A. and Kochur, A.G. (2016), "A study of the structural and spectral characteristics of free and bound water in kaolinite", Opt. Spectrosc. 121, 357-363. http://doi.org/10.1134/S0030400X16090113.
  6. Kleinberg, R. and Griffin, D. (2005), "NMR measurements of permafrost: unfrozen water assay, pore-scale distribution of ice, and hydraulic permeability of sediments", Cold Reg. Sci. Technol., 42(1), 63-77. http://doi.org/10.1016/j.coldregions.2004.12.002.
  7. Lagaly, G. and Ziesmer, S. (2003), "Colloid chemistry of clay minerals: the coagulation of montmorillonite dispersions", Adv. Colloid Interface Sci., 100, 105-128. http://doi.org/10.1016/S0001-8686(02)00064-7.
  8. Logsdon, S.D. and Laird, D.A. (2004), "Electrical conductivity spectra of smectites as influenced by saturating cation and humidity", Clays Clay Miner., 52(4), 411-420. http://doi.org/10.1346/ccmn.2004.0520402.
  9. Low, P.F. (1979), "Nature and properties of water in montmorillonite-water systems", Soil Sci. Soc. Am. J., 43(4), 651-658. http://doi.org/10.2136/sssaj1979.03615995004300040005x.
  10. Ma, C. and Hueckel, T. (1992), "Stress and pore pressure in saturated clay subjected to heat from radioactive waste: a numerical simulation", Can. Geotech. J., 29(6), 1087-1094. http://doi.org/10.1139/t92-125.
  11. Mojid, M. and Cho, H. (2012), "Effects of water content and temperature on the surface conductivity of bentonite clay", Soil. Res., 50(1), 44-49. http://doi.org/10.1071/SR11228.
  12. Morrow, C., Moore, D.E. and Lockner, D. (2000), "The effect of mineral bond strength and adsorbed water on fault gouge frictional strength", Geophys. Res. Lett., 27(6), 815-818, http://doi.org/10.1029/1999GL008401.
  13. Nagrale, P.P. and Patil, A.P. (2017), "Improvement in engineering properties of subgrade soil due to stabilization and its effect on pavement response", Geomech. Eng., 12(2), 257-267, http://doi.org/10.12989/gae.2017.12.2.257.
  14. Panchev, I., Baeva, M. and Lambov, S. (2005), "Influence of edible films upon the moisture loss and microstructure of dietetic sucrose-free sponge cakes during storage", Drying Technol., 23(4), 925-940. http://doi.org/10.1081/DRT200054241.
  15. Peng, J., Zhang, J., Li, J., Yao, Y. and Zhang, A. (2020), "Modeling humidity and stress-dependent subgrade soils in flexible pavements", Comput. Geotech., 120, 103413. http://doi.org/10.1016/j.compgeo.2019.103413.
  16. Siewert, C. and Kucerik, J. (2015), "Practical applications of thermogravimetry in soil science", J. Therm. Anal. Calorim. 120(1), 471-480. http://doi.org/10.1007/s10973-014-4256-7.
  17. Singh, P.N. and Wallender, W.W. (2008), "Effects of adsorbed water layer in predicting saturated hydraulic conductivity for clays with Kozeny-Carman equation", J. Geotech. Geoenviron. Eng., 134(6), 829-836, http://doi.org/10.1061/(ASCE)1090-0241(2008)134:6(829).
  18. Souza, C. and Nascimento, R. (2008), "Adsorption behavior of cationic polymers on bentonite", J. Therm. Anal. Calorim., 94(2), 579-583. http://doi.org/10.1007/s10973-007-8774-4.
  19. Sposito, G. and Prost, R. (1982), "Structure of water adsorbed on smectites", Chem. Rev., 82(6), 553-573, http://doi.org/10.1021/cr00052a001.
  20. Tang, A. and Cui, Y. (2009), "Modelling the thermo-mechanical volume change behaviour of compacted expansive clays", Geotechnique, 59(3), 185-195. http://doi.org/10.1680/geot.2009.59.3.185.
  21. Tang, L.S., Chen, H.K., Sun, Y.L., Zhang, Q.H. and Liao, H.R. (2018), "Traffic-load-induced dynamic stress accumulation in subgrade and subsoil using small scale model tests", Geomech. Eng., 16(2), 113-124. http://doi.org/10.12989/gae.2018.16.2.113.
  22. Teltayev, B.B. and Suppes, E.A. (2017), "Regularities for temperature variation in subgrade of highway", Geomech. Eng., 13(5), 793-807. http://doi.org/10.12989/gae.2017.13.5.793.
  23. Tian, H., Wei, C., Wei, H. and Zhou, J. (2014), "Freezing and thawing characteristics of frozen soils: Bound water content and hysteresis phenomenon", Cold Reg. Sci. Technol., 103, 74-81. http://doi.org/10.1016/j.coldregions.2014.03.007.
  24. Tomura, S., Maeda, M., Inukai, K., Ohashi, F., Suzuki, M. and Shibasaki, Y. (1998), "Characterization of adsorbed water on sepiolite.", J. Clay Sci. Soc. Jpn., 38(1), 1-9, http://doi.org/10.11362/jcssjnendokagaku1961.38.1.
  25. Tone, K., Kamori, M. and Shibasaki, Y. (1993), "Adsorbed cations and water film thickness on the kaolinitic clay surface", J. Ceram. Soc. Jpn., 101(1180), 1395-1399, http://doi.org/10.2109/jcersj.101.1395.
  26. Tuller, M. and Or, D. (2005), "Water films and scaling of soil characteristic curves at low water contents", Water Resour. Res., 41(9), http://doi.org/10.1029/2005WR004142.
  27. Wang, H., Qian, H., Gao, Y. and Li, Y. (2020), "Classification and physical characteristics of bound water in loess and its main clay minerals", Eng. Geol., 265, http://doi.org/10.1016/j.enggeo.2019.105394.
  28. Wang, W.Y., Li, A.M. and Zhang, X.M. (2011a), "DSC and SEM analysis on bound water characteristics in sewage sludge", Adv. Mater. Res., 347, 2085-2089. http://doi.org/10.4028/www.scientific.net/AMR.347-353.2085.
  29. Wang, Y., Lu, S., Ren, T. and Li, B. (2011b), "Bound Water Content of Air-Dry Soils Measured by Thermal Analysis", Soil Sci. Soc. Am. J., 75(2), 481-487. http://doi.org/10.2136/sssaj2010.0065.
  30. Watanabe, K. and Mizoguchi, M. (2002), "Amount of unfrozen water in frozen porous media saturated with solution", Cold Reg. Sci. Technol., 34(2), 103-110. http://doi.org/10.1016/S0165-232X(01)00063-5.
  31. Xu, H., Shu, S., Wang, S., Zhou, A., Jiang, P., Zhu, W., Fan, X. and Chen, L. (2019), "Studies on the chemical compatibility of soil-bentonite cut-off walls for landfills", J. Environ. Manage., 237, 155-162. http://doi.org/10.1016/j.jenvman.2019.02.051.
  32. Yesilbas, M. and Boily, J.F. (2016), "Particle size controls on water adsorption and condensation regimes at mineral surfaces", Sci. Rep., 6, 32136. http://doi.org/10.1038/srep32136.
  33. Zeng, L., Xiao, L., Zhang, J. and Fu, H. (2020), "The Role of Nanotechnology in Subgrade and Pavement Engineering: A Review", J. Nanosci. Nanotechnol., 20(8), 4607-4618. http://doi.org/10.1166/jnn.2020.18491.
  34. Zhang, J., Ding, L., Li, F. and Peng, J. (2020a), "Recycled aggregates from construction and demolition wastes as alternative filling materials for highway subgrades in China", J. Cleaner Prod., 255, 120223, http://doi.org/10.1016/j.jclepro.2020.120223.
  35. Zhang, R., Wu, M., Kumar, P. and Gao, Q.F. (2020b), "Influence of loosely bound water on compressibility of compacted fine-grained soils", Adv. Civ. Eng., 2020, 1-14. http://doi.org/10.1155/2020/1496241.
  36. Zymnis, D.M., Whitttle, A. and Germaine, J.T. (2019), "Measurement of Temperature-Dependent Bound Water in Clays", Geotech. Test. J., 42(1), 20170012, http://doi.org/10.1520/GTJ20170012.