한국표면공학회지 (Journal of Surface Science and Engineering)

  • 제54권6호
  • /
  • Pages.294-301
  • /
  • 2021
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지
DOI QR코드

DOI QR Code

스테인리스 강의 부식 측정방법의 이용과 전망

Prospects on the Use of Corrosion Rate Measurement Method for Stainless Steel

  • 최용선 (인하대학교 화학 화학공학융합학과) ;
  • 이재원 (인하대학교 화학 화학공학융합학과) ;
  • 박은옥 (인하대학교 화학 화학공학융합학과) ;
  • 이기영 (인하대학교 화학 화학공학융합학과)
  • Choi, Yongseon (Department of Chemistry and Chemical Engineering, Inha University) ;
  • Lee, Jaewon (Department of Chemistry and Chemical Engineering, Inha University) ;
  • Park, Eunoak (Department of Chemistry and Chemical Engineering, Inha University) ;
  • Lee, Kiyoung (Department of Chemistry and Chemical Engineering, Inha University)
  • 투고 : 2021.12.14
  • 심사 : 2021.12.24
  • 발행 : 2021.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

As the number of cases of performance degradation owing to corrosion of plant during processing in industries increases, the cost of maintaining industrial factory is increasing year by the year. Most of the materials of the facilities are consist of stainless steel (SS) such as austenite SS, ferrite SS, martensite SS, and duplex SS. Among them austenite SS is cheap and has excellent corrosion resistance and heat resistance. Corrosion is the consumption and change of metals by altering chemical and electrical reactions. The types of SS corrosion include pitting corrosion, crevice corrosion, galvanic corrosion, stress corrosion cracking, and thermal corrosion. The corrosion of SS is not only investigated various environmental factors but also the measurement of the corrosion rate. Therefore, it aims to understand comprehensive corrosion rates in various environments using qualitative, quantitative and electrochemical methods.

키워드

과제정보

본 연구는 2021 년도 산업통상자원부의 재원으로 한국에너지기술평가원(KETEP)의 지원을 받아 수행한 연구과제입니다. (No. 2021202080023C)

참고문헌

  1. Kin-Ho Lo, Chan-Hung Shek, Ki-Leuk Joseph Lai, Recent developments in stainless steels, Mater. Sci. R Rep 65 (2009) 39-104 https://doi.org/10.1016/j.mser.2009.03.001
  2. Dae-hwan Ko, Young-il Park, Yong-taek Shin, Pitting Corrosion Characteristic Depending on Welding Pass and Heat Input of GTA Weldment on Superaustenitic Stainless Steel (UNS S32654), J. of Welding and Joining 38 (2020) 528-534. https://doi.org/10.5781/JWJ.2020.38.6.2
  3. Sun Hua, Xin-qiang Wu, En-Hou Han, Yu-zhou Wei, Effect of pH and dissolved oxygen on electrochemical behavior and oxide films of 304SS in borated and lithiated high temperature water, Corros. Sci. 59 (2012) 334-342. https://doi.org/10.1016/j.corsci.2012.03.022
  4. Sun Hua, Xin-qiang Wu, En-Hou Han, Effects of temperature on the oxide film properties of 304 stainless steel in high temperature lithium borate buffer solution, Corros. Sci 51 (2009) 2840-2847. https://doi.org/10.1016/j.corsci.2009.08.006
  5. Ren-bo Song, Jian-ying Xiang, Dong-po Hou, Characteristics of mechanical properties and microstructure for 316L austenitic stainless steel, J. Iron Steel Res. Int. 18 (2011) 53-59.
  6. Guo-cai Chail, Kangas Pasi, Super and hyper duplex stainless steels: structures, properties and application, Procedia Struct. Integr. 2 (2016) 1755-1762. https://doi.org/10.1016/j.prostr.2016.06.221
  7. Yun-tao Xi, Dao-xin Liu, D. Liu, Z. Han, Improvement of mechanical properties of martensitic stainless steel by plasma nitriding at low temperature, ACTA METALL SIN-ENGL. 21 (2008) 21-29. https://doi.org/10.1016/S1006-7191(08)60015-0
  8. A.C.T.M. Van Zwieten, James-H Bulloch, Some considerations on the toughness properties of ferritic stainless steels a brief review, Int. J. Press. Vessels Pip. 56 (1993) 1-31. https://doi.org/10.1016/0308-0161(93)90114-9
  9. Muhamad-Izhar Sahri, Norinsan-Kamil Othman, Zaifol Samsu, Abdul-Razak Daud, Investigation of high temperature corrosion behavior on 304L austenite stainless steel in corrosive environments, AIP Conf Proc. 1614 (2014) 152-157.
  10. Jia-zhen Wang, Jian-qiu Wang, En-Hou Han, Influence of conductivity on corrosion behavior of 304 stainless steel in high temperature aqueous environment, J Mater Sci Technol 32 (2016) 333-340. https://doi.org/10.1016/j.jmst.2015.12.008
  11. Ke Wang, Ji-hui Wang, Wen-bin Hu, Evaluation of temperature effect on the corrosion process of 304 stainless steel in high temperature water with electrochemical noise, Mater. 82 (2015) 155-163. https://doi.org/10.1016/j.matdes.2015.05.044
  12. Hua Sun, Xin-qiang Wu, En-Hou Han, Effects of temperature on oxide film properties of 304 stainless steel in high temperature lithium borate buffer solution, Corros. Sci 51 (2009) 2840-2847. https://doi.org/10.1016/j.corsci.2009.08.006
  13. Bo Da, Hong-fa Yu, Hai-yan Ma, Zhang-yu Wu, Reinforcement corrosion research based on the linear polarization resistance method for coral aggregate seawater concrete in a marine environment, Anti-Corros. Methods Mater 65 (2018) 458-470. https://doi.org/10.1108/ACMM-03-2018-1911
  14. Ji-an Wu, Xin-qiang Wu, En-Hou Han, The evolution of electrochemical behavior and oxide film properties of 304 stainless steel in high temperature aqueous environment, Electrochim. Acta 71 (2012) 219-226. https://doi.org/10.1016/j.electacta.2012.03.148