DOI QR코드

DOI QR Code

Numerical simulation of the influence of interaction between Qanat and tunnel on the ground settlement

  • Sarfarazi, Vahab (Department of Mining Engineering, Hamedan University of Technology) ;
  • Tabaroei, Abdollah (Department of Civil Engineering, Eshragh Institute of Higher Education)
  • 투고 : 2020.08.06
  • 심사 : 2020.11.26
  • 발행 : 2020.12.10

초록

This paper presents analysis of the interaction between tunnel and Qanat with a particular interest for the optimization of Qanat shape using the discrete element code, PFC2D, and the results will be compared with the FEM results of PLAXIS2D. For these concerns, using software PFC2D based on Discrete Element Method (DEM), a model with dimension of 100m 100 m was prepared. A circular tunnel with dimension of 9 m was situated 20 m below the ground surface. Also one Qanat was situated perpendicularly above the tunnel roof. Distance between Qanat center and ground surface was 8 m. Five different shapes for Qanat were selected i.e., square, semi-circular, vertical ellipse, circular and horizontal ellipse. Confining pressure of 5 MPa was applied to the model. The vertical displacement of balls situated in ground surface was picked up to measure the ground subsidence. Also two measuring circles were situated at the tunnel roof and at the Qanat roof to check the vertical displacements. The properties of the alluvial soil of Tehran city are: γdry=19 (KN/㎥), E= 750 (kg/㎠), ν=0.35, c=0.3(kg/㎠), φ=34°. In order to validate the DEM results, a comparison between the numerical results (obtained in this study) and analytical and field monitoring have been done. The PFC2D results are compared with the FEM results. The results shows that when Qanat has rectangular shape, the tensile stress concentration at the Qanat corners has maximum value while it has minimum value for vertical ellipse shape. The ground subsidence for Qanat rectangular shape has maximum value while it has minimum value for ellipse shape of Qanat. The vertical displacements at the tunnel roof for Qanat rectangular shape has maximum value while it has minimum value for ellipse shape of Qanat. Historical shape of Qante approved the finding of this research.

키워드

참고문헌

  1. Chan, D., Kodikara, J.K., Gould, S., Ranjith, P.G., Choi, X.S.K., and Davis, P. (2007), "Data analysis and laboratory investigation of the behaviour of pipes buried in reactive clay", Proceedings of the 10th Australia New Zealand Conference on Geomechanics - Common Ground, Queensland, Australia, October.
  2. Cundall, P.A. (1971) "A computer model for simulating progressive large scale movements in blocky rock systems", Proceedings of the Symposium of the International Society of Rock Mechanics, Nancy, France, September.
  3. Cundall, P.A. and Strack, O.D.L. (1979) "A discrete numerical model for granular assembles", Geotechnique, 29(1), 47-65. https://doi.org/10.1680/geot.1979.29.1.47.
  4. Divall, S. and Goodey, R.J. (2015), "Twin-tunnelling-induced ground movements in clay", Proc. Inst. Civ. Eng. Geotech. Eng., 168(3), 247-256. https://doi.org/10.1680/geng.14.00054.
  5. Do, N.A., Dias, D., Oreste, P. and Djeran-Maigre, I. (2014), "Three-dimensional numerical simulation of a mechanized twin tunnels in soft ground", Tunn. Undergr. Sp. Tech., 42, 40-51. https://doi.org/10.1016/j.tust.2014.02.001.
  6. Donze, F.V., Richefeu, V. and Magnier, S.A. (2009), "Advances in discrete element method applied to soil rock and concrete mechanics", Elec. J. Geol. Eng., 8, 1-44.
  7. Fakhimi, A., Carvalho, T. and Labuz, J.F. (2002), "Simulation of failure around a circular opening in rock", Int. J. Rock Mech. Min. Sci., 39(4), 507-515. https://doi.org/10.1016/S1365-1609(02)00041-2.
  8. Gould, S., Boulaire, F., Marlow, D. and Kodikara, J. (2009), "Understanding how the Australian climate can affect pipe failure", Proceedings of OzWater 09 Australia's National Water Conference and Exhibition, Melbourne, Australia, March.
  9. Greenwood J. (2002) "3D analysis of surface settlement in soft ground tunnelling", Ph.D. Thesis, University of Minnesota, Minneapolis, Minnesota, U.S.A.
  10. Guglielmetti, V., Grasso, P., Mahtab, A. and Xu, S. (2007), Mechanized Tunnelling in Urban Areas: Design Methodology and Construction Control, Geodata S.P.A., Turin, Italy, 312-322.
  11. Haeri, H. and Sarfarazi, V. (2016a), "The effect of micro pore on the characteristics of crack tip plastic zone in concrete", Comput. Concrete, 17(1), 107-112. https://doi.org/10.12989/cac.2016.17.1.107.
  12. Haeri, H. and Sarfarazi, V. (2016b), "The effect of non-persistent joints on sliding direction of rock slopes", Comput. Concrete, 17(6), 723-737. https://doi.org/10.12989/cac.2016.17.6.723.
  13. Haeri, H. and Sarfarazi, V. (2016c), "The deformable multilaminate for predicting the elasto-plastic behavior of rocks", Comput. Concrete, 18(2), 201-214. https://doi.org/10.12989/cac.2016.18.2.201.
  14. Haeri, H., Sarfarazi, V. and Lazemi, H.A. (2016d), "Experimental study of shear behavior of planar non-persistent joint", Comput. Concrete, 17(5), 639-653. https://doi.org/10.12989/cac.2016.17.5.639.
  15. Hage Chehade F. and Shahrour I. (2008), "Numerical analysis of the interaction between twin-tunnels: Influence of the relative position and construction procedure", Tunn. Undergr. Sp. Tech., 23(2), 210-214. https://doi.org/10.1016/j.tust.2007.03.004.
  16. Harris, D.I., Mair, R.J., Love, JP., Taylor, R.N. and Henderson, T.O. (1994), "Observations of ground and structure movements for compensation grouting during tunnel construction at Waterloo station", Geotechnique, 44(4), 691-713. https://doi.org/10.1680/geot.1994.44.4.691.
  17. Hu, J., Wen, G., Lin, Q., Cao, P. and Li, S. (2020), "Mechanical properties and crack evolution of double-layer composite rocklike specimens with two parallel fissures under uniaxial compression", Theor. Appl. Fract. Mech., 108, 102610. https://doi.org/10.1016/j.tafmec.2020.102610.
  18. Itasca Consulting Group, Inc. (2004), PFC2D, Particle Flow Code in 2 Dimensions, Version 3.
  19. Jiang, M. and Yin, Z.Y. (2012), "Analysis of stress redistribution in soil and earth pressure on tunnel lining using the discrete element method", Tunn. Undergr. Sp. Tech., 32, 251-259. https://doi.org/10.1016/j.tust.2012.06.001.
  20. Jiang, M. and Yin, Z.Y. (2014), "Influence of soil conditioning on ground deformation during longitudinal tunneling", Comptes Rendus Mecanique, 342(3), 189-197. https://doi.org/10.1016/j.crme.2014.02.002.
  21. Jin, Y.F., Yin, Z.Y., Zhou, W.H. and Huang, H.W. (2019), "Multiobjective optimization-based updating of predictions during excavation", Eng. Appl. Artif. Intel., 78, 102-123. https://doi.org/10.1016/j.engappai.2018.11.002.
  22. Kanou, S., Amano, M., Terasaka, Y., Matsumoto, N. and Wada, T. (2003), "Terra-mechanical simulation using distinct element method", KOMAT'SO Technical Report, 13-14.
  23. Katebi, H., Rezaei, A.H., Hajialilue-Bonab, M. and Tarifard, A. (2015), "Assessment the influence of ground stratification, tunnel and surface buildings specifications on shield tunnel lining loads (by FEM)", Tunn. Undergr. Sp. Tech., 49, 67-78. https://doi.org/10.1016/j.tust.2015.04.004.
  24. Li, P., Du, S.J., Ma, X.F., Yin, Z.Y. and Shen, S.L. (2014), "Centrifuge investigation into the effect of new shield tunnelling on an existing underlying large-diameter tunnel", Tunn. Undergr. Sp. Tech., 42, 59-66. https://doi.org/10.1016/j.tust.2014.02.004.
  25. Liao, S.M., Peng, F.L. and Shen, S.L. (2008), "Analysis of shearing effect on tunnel induced by load transfer along longitudinal direction", Tunn. Undergr. Sp. Tech., 23(4), 421-430. https://doi.org/10.1016/j.tust.2007.07.001.
  26. Lin, Q., Cao, P., Cao, R., Lin, H. and Meng, J. (2020a), "Mechanical behavior around double circular openings in a jointed rock mass under uniaxial compression", Arch. Civ. Mech. Eng., 20(1), 1-18. https://doi.org/10.1007/s43452-020-00027-z.
  27. Lin, Q., Cao, P., Meng, J., Cao, R. and Zhao, Z. (2020b), "Strength and failure characteristics of jointed rock mass with double circular holes under uniaxial compression: Insights from discrete element method modelling", Theor. Appl. Fract. Mech., 109, 102692. https://doi.org/10.1016/j.tafmec.2020.102692.
  28. Liu, H., Li, P. and Liu, J. (2011), "Numerical investigation of underlying tunnel heave during a new tunnel construction", Tunn. Undergr. Sp. Tech., 26(2), 276-283. https://doi.org/10.1016/j.tust.2010.10.002.
  29. Moller, S.C. (2006), Tunnel Induced Settlements and Structural Forces in Linings, in Geotechnik, University of Stuttgart, Inst. f., Stuttgart, Germany, 108-125.
  30. Ng, C.W.W., Liu, G.B. and Li, Q. (2013), "Investigation of the long-term tunnel settlement mechanisms of the first metro line in Shanghai", Can. Geotech. J., 50(6), 674-684. https://doi.org/10.1139/cgj-2012-0298.
  31. Pratt, C., Yang, H., Hodkiewicz, M. and Oldham, S. (2011), "Factors influencing pipe failures in the WA environment", Proceedings of the Co-operative Education for Enterprise Development CEED Seminar, Perth, Australia.
  32. Sarfarazi, V. and Haeri, H. (2016a), "Effect of number and configuration of bridges on shear properties of sliding surface", J. Min. Sci., 52(2), 245-257. https://doi.org/10.1134/S1062739116020370.
  33. Sarfarazi, V., Faridi, H.R., Haeri, H. and Schubert, W. (2016b), "A new approach for measurement of anisotropic tensile strength of concrete", Adv. Concrete Construct., 3(4), 269-284. http://doi.org/10.12989/acc.2015.3.4.26
  34. Sarfarazi, V., Ghazvinian, A., Schubert, W., Blumel, M. and Nejati, H.R. (2014), "Numerical simulation of the process of fracture of Echelon rock joints", Rock Mech. Rock Eng., 47(4), 1355-1371. http://doi.org/10.1007/s00603-013-0450-3.
  35. Sarfarazi, V., Haeri, H. and Khaloo, A. (2016c), "The effect of non-persistent joints on sliding direction of rock slopes", Comput. Concrete, 17(6), 723-737. https://doi.org/10.12989/cac.2016.17.6.723.
  36. Shen, S.L. and Xu, Y.S. (2011), "Numerical evaluation of land subsidence induced by groundwater pumping in Shanghai", Can. Geotech. J., 48(9), 1378-1392. https://doi.org/10.1139/t11-049.
  37. Tan, Y. and Wei, B. (2011), "Observed behaviors of a long and deep excavation constructed by cut-and-cover technique in Shanghai soft clay", J. Geotech. Geoenviron. Eng., 138(1), 69-88. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000553.
  38. Tian, X. (2020), "A theoretical calculation method of influence radius of settlement based on the slices method in tunnel construction", Math. Prob. Eng., 4, 212-230. https://doi.org/10.1155/2020/5804823.
  39. Wang J.G., Kong S.L and Leung C.F. (2003) "Twin tunnel induced ground settlement in soft soils", Proceedings of the SINOJAPANESE Symposium on Geotechnical Engineering, Beijing, China, October.
  40. Yang, X.L. and Wang, J.M. (2011), "Ground movement prediction for tunnels using simplified procedure", Tunn. Undergr. Sp. Tech., 26(3), 462-471. https://doi.org/10.1016/j.tust.2011.01.002.
  41. Zhang, Z.X., Liu, C., Huang, X., Kwok, C.Y. and Teng, L. (2016), "Three-dimensional finite-element analysis on ground responses during twin-tunnel construction using the URUP method", Tunn. Undergr. Sp. Tech., 58, 133-146. https://doi.org/10.1016/j.tust.2016.05.001.
  42. Zhang, Z. and Huang, M. (2014), "Geotechnical influence on existing subway tunnels induced by multiline tunneling in Shanghai soft soil", Comput. Geotech., 56, 121-132. https://doi.org/10.1016/j.compgeo.2013.11.008.
  43. Zhang, Z., Huang, M., Zhang, C., Jiang, K. and Lu, M. (2019), "Time domain analyses for pile deformation induced by adjacent excavation considering influences of viscoelastic mechanism", Tunn. Undergr. Sp. Tech., 85(3), 392-405. https://doi.org/10.1016/j.tust.2018.12.020.
  44. Zhang, Z., Huang, M. and Wang, W. (2013), "Evaluation of deformation response for adjacent tunnels due to soil unloading in excavation engineering", Tunn. Undergr. Sp. Tech., 38(9), 244-253. https://doi.org/10.1016/j.tust.2013.07.002.
  45. Zhang, Z., Pan, Y., Zhang, M., Lv, X., Jiang, K. and Li, S. (2020), "Complex variable analytical prediction for ground deformation and lining responses due to shield tunneling considering groundwater level variation in clays", Comput. Geotech., 120(4), 103443. https://doi.org/10.1016/j.compgeo.2020.103443.
  46. Zhang, Z., Huang, M., Zhang, C., Jiang, K., Wang, Z. and Xi, X. (2020), "Complex variable solution for twin tunneling-induced ground movements considering non-uniform convergence pattern", Int. J. Geomech., 20(6), 04020060. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001700.
  47. Zhang, Z., Huang, M., Zhang, C., Jiang, K. and Bai, Q. (2020), "Analytical prediction of tunneling-induced ground movements and liner deformation in saturated soils considering influences of shield air pressure", Appl. Math. Model., 78, 749-772. https://doi.org/10.1016/j.apm.2019.10.025.
  48. Zhang, Z., Huang, M., Zhang, C., Jiang, K. and Lu, M. (2019), "Time-domain analyses for pile deformation induced by adjacent excavation considering influences of viscoelastic mechanism", Tunn. Undergr. Sp. Tech., 85(3), 392-405. https://doi.org/10.1016/j.tust.2018.12.020.
  49. Zhang, Z., Huang, M., Xu, C., Jiang, Y. and Wang, W. (2018), "Simplified solution for tunnel-soil-pile interaction in Pasternak's foundation model", Tunn. Undergr. Sp. Tech., 78(8), 146-158. https://doi.org/10.1016/j.tust.2018.04.025.
  50. Zhang, Z., Huang, M., Xi, X. and Yang, X. (2018), "Complex variable solutions for soil and liner deformation due to tunneling in clays", Int. J. Geomech., 18(7), 04018074. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001197.

피인용 문헌

  1. Analytical Stress Solution and Numerical Mechanical Behavior of Rock Mass Containing an Opening under Different Confining Stress Conditions vol.9, pp.19, 2020, https://doi.org/10.3390/math9192462