DOI QR코드

DOI QR Code

Experimental study on shear behaviors of Partial Precast Steel Reinforced Concrete beams

  • Yang, Yong (School of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Li, Hui (School of Civil Engineering, Xi'an University of Architecture & Technology)
  • Received : 2020.01.17
  • Accepted : 2020.11.19
  • Published : 2020.12.10

Abstract

An innovative Partially Precast Steel Reinforced Concrete (PPSRC) beam is presented in this paper. To study the shear behavior of PPSRC beams, static loading experiments were conducted on 10 specimens, including 4 T-beam specimens and 4 PPSRC inverted T-beam specimens together with 2 PPSRC rectangular section beams. In the tests, the shear behaviors of the PPSRC beams were emphasized. On the basis of the experiments, the failure mode and ultimate bearing capacity were thoroughly examined. The calculation methods for shear capacity are also presented in this paper. The analysis of mechanical behavior and the calculation methods presented can be used as a reference to design these innovative composite PPSRC beams and provide a significant foundation for further research.

Keywords

Acknowledgement

The research described in this paper was financially supported by the Natural Science Foundation of China (Program No. 50708040 and No. 50978107) and the National key research and development program of China (Program No. 2016YFC0701400). Special thanks to the Program for Innovative Research Team of Xi'an University of Architecture and Technology and Program for Changjiang Scholars and Innovative Research Team at the University of China.

References

  1. ACI Committee 318 (2005), Building code requirements for reinforced concrete (ACI318-05) and commentary (ACI318R-05), American Concrete Institute (ACI), Detroit, Mich.
  2. Ahn, H.J. and Ryu, S.H. (2007), "Experimental study on flexural strength of modular composite profile beams", Steel Compos. Struct., 7(1), 71-85. https://doi.org/10.12989/scs.2007.7.1.071.
  3. Belarbi, A. and Hsu, T.T.C. (1994), "Constitutive laws of concrete in tension and reinforcing bars stiffened by concrete", ACI Struct. J., 91(4), 465-474.
  4. Belarbi, A. and Hsu, T.T.C. (1995), "Constitutive laws of softened concrete in biaxial tension-compression", ACI Struct. J., 92(5), 562-573.
  5. Chen, C.C., Lin, K.T. and Chen, Y.J. (2018), "Behavior and shear strength of steel shape reinforced concrete deep beams", Eng. Struct., 175, 425-435. https://doi.org/10.1016/j.engstruct.2018.08.045.
  6. Colajanni, P., La Mendola, L. and Monaco, A. (2014), "Stress Transfer Mechanism Investigation in Hybrid Steel Trussed-Concrete Beams by Push-Out Tests", J. Constr. Steel Res., 95(4), 56-70. https://doi.org/10.1016/j.jcsr.2013.11.025.
  7. CSA (1994), Design of concrete structures for buildings, Standard CAN/CSA A23.3-94, Canadian Standards Association, Rexdale, Ont.
  8. Dong, S., Yu, W. and Shang, X. (1998), "Stirup stress of reinforced concrete", J. Jilin Archtect. Civil Eng. Inst.: Overseas Construction Version, 2, 5-14. (in Chinese)
  9. GB/T 11263-2017 (2017), Hot rolled H and cut T section steel, China Standard Press, Beijing, China.
  10. Guo, Z. and Shi, X. (2003), Theory and analysis of reinforced concrete, Tsinghua university press, Beijing, China.
  11. Guyi, K. (1988), "Development of truss model theory applying to reinforced concrete members subject to shear and torsion", J. Build. Struct., 9(6), 39-46. (in Chinese)
  12. Hajjar, J.F. (2002), "Composite steel and concrete structural systems for seismic engineering", J. Constr. Steel Res., 58(5), 703-723. https://doi.org/10.1016/S0143-974X(01)00093-1.
  13. Han, L., Li, W. and Bjorhovde, R. (2014), "Developments and advanced applications of concrete filled steel tubular (CFST) structures: Members", J. Constr. Steel Res., 100, 211-228. https://doi.org/10.1016/j.jcsr.2014.04.016.
  14. Hong, W.K., Kim, J.M. and Park, S.C., Lee, H.C., Kim, S.I, Lee, S.G. and Yoon, K.J. (2008b), "Composite beam composed of steel and precast concrete. (Modularized Hybrid System, MHS) Part II: analytical investigation", Struct. Des. Tall Spec. Build., 18 (8), 891-905. https://doi.org/10.1002/tal.507.
  15. Hong, W.K., Park, S.C. and Kim, J.M., Kim, S.I., Lee, S.G. and Yoon, K.J. (2008a), "Composite beam composed of steel and precast concrete (Modularized Hybrid System, MHS). Part I: experimental investigation", Struct. Des. Tall Spec. Build., 19 (3), 275-289. https://doi.org/10.1002/tal.507.
  16. JGJ 138-2016 (2016), Code for Design of Composite Structures, China building industry press, Beijing, China.
  17. Ji, W. (1999), "Parctical calculating method of shear strength on diagonal section for concrete T beams", J. Northern Jiaotong University, 23(4), 26-28. (in Chinese) https://doi.org/10.3969/j.issn.1673-0291.1999.04.006
  18. Johnson, R.P. (2004), "Composite Structures of Steel and Concrete: Beams, Slabs, Columns, and Frames for Buildings", Blackwell Pub.
  19. Leon, R.T. (2008), "Composite Construction in Steel and Concrete", Proceedings of the 2008 Composite Construction in Steel and Concrete Conference, Tabernash, Colorado.
  20. Liang, Q.Q., Xie, Y.M. and Steven, G.P. (2000), "Topology optimization of strut-and-tie models in reinforced concrete structures using an evolutionary procedure", ACI Struct. J., 97(2), 322-330.
  21. Lu, W.Y. (2006), "Shear strength prediction for steel reinforced concrete deep beams", J. Constr. Steel Res., 62, 933-942. https://doi.org/10.1016/j.jcsr.2006.02.007
  22. Morsch, E. (1908), Der Eisenbetonbau, seine Theorie und Anwendung, third edition, Verlag von Konrad Wittwer, Hamburg, Germany.
  23. Rahal, K.N. and Collins, M.P. (1999), "Background to the general method of shear design in the 1994 CSA-A23.3 standard", Can. J. Civil Eng., 26, 827-839. https://doi.org/10.1139/l99-050.
  24. Ritter, W. (1899), "Die Bauweise Hennebique", Schweizerische Bauzeitung, 33(7), 41-61.
  25. Ryu, S.H. (2010), "Study on behavior of T-section modular composite profiled beams", Steel Compos. Struct., 10(5), 457-473. https://doi.org/10.12989/scs.2010.10.5.457.
  26. Tao, J., Zuoqiao, Z. and Jianlan, Z. (2001), "A new softened truss model for Reinforced concrete", J. Build. Struct., 22(1), 69-75. (in Chinese)
  27. Tesser, L. and Scotta, R. (2013), "Flexural and shear capacity of composite steel truss and concrete beams with inferior precast concrete base", Eng. Struct., 49(4), 2013, 135-145. https://doi.org/10.1016/j.engstruct.2012.11.004.
  28. Tong, L., Liu, B. and Xian, Q. and Zhao, X.L. (2016), "Experimental study on fatigue behavior of Steel Reinforced Concrete (SRC) beams", Eng. Struct., 123, 247-262. https://doi.org/10.1016/j.engstruct.2016.05.052.
  29. Tong, L., Xiao, S. and He, L., Zhang, Y. and Zhao, X.L. (2018), "Fatigue behavior of steel reinforced concrete (SRC) beams with different shear span-to-depth ratios", Eng. Struct., 166, 339-353. https://doi.org/10.1016/j.engstruct.2018.03.071.
  30. Uy, B. and Bradford, M.A. (1995a), "Ductility of profiled composite beams. Part I: experimental study", J. Struct. Eng., 121(5), 876-882. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:5(876).
  31. Uy, B. and Bradford, M.A. (1995b), "Ductility of profiled composite beams. Part II: analytical study", J. Struct. Eng., 121 (5), 883-889. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:5(883)
  32. Vecchio, F.J. and Collins, M.P. (1986), "The modified compression field theory for reinforced concrete elements subjected to shear", ACI J. Proceedings, 83(2), 219-231. https://doi.org/10.14359/10416.
  33. Xiong, X., Yao, G. and Su, X. (2018), "Experimental and numerical studies on seismic behavior of bonded and unbonded prestressed steel reinforced concrete frame beam", Eng. Struct., 167, 567-581. https://doi.org/10.1016/j.engstruct.2018.04.024.
  34. Xu, C., Cao, P. and Wu, K., Lin, s. Yang, D. (2019), "Experimental investigation of the behavior composite steel-concrete composite beams containing different amounts of steel fibres and conventional reinforcement", Constr. Build. Mater., 202, 23-36. https://doi.org/10.1016/j.conbuildmat.2019.01.026.
  35. Xu, K., Huo, M. and Chen, L. (1991), "The softening truss theory and an experimental study of RC/PC beams", J. China Railway Society, (13), 88-96. (in Chinese)
  36. Xu, S., Wu, C. and Liu, Z., Han, K., Su, Y., Zhao, J. and Li, J. (2017), "Experimental investigation of seismic behavior of ultra-high performance steel fiber reinforced concrete columns", Eng. Struct., 152, 129-148. https://doi.org/10.1016/j.engstruct.2017.09.007.
  37. Yao, D., Jia, J. and Wu, F. and Yu, F. (2014), "Shear performance of prestressed ultra high strength concrete encased steel beams", Constr. Build. Mater., 52, 194-201. https://doi.org/10.1016/j.conbuildmat.2013.11.006.
  38. YB 9082-2006 (2006), Technical Regulations of Steel-Reinforced Concrete Structures, Metallurgical industry press, Beijing, China.
  39. Zhang, N., Fu, C.C. and Chen, L. and He, L. (2016), "Experimental studies of reinforced concrete beams using embedded steel trusses", ACI Struct. J., 113(4), 701-710. https://doi.org/10.14359/51688616.
  40. Zhao, H. (2001), Steel-concrete Composite Structure, Science press, China.
  41. Zhao, Y., Zhou, X. and Yang, Y., Liu, J. and Chen, Y.F. (2019), "Shear behavior of a novel cold-formed U-shaped steel and concrete composite beam", Eng. Struct., 200, 1-11. https://doi.org/10.1016/j.engstruct.2019.109745.
  42. Zhu, B.F. (2012), Introduction of the Prefabricated Structures, China Architecture and Building Press, Beijing, China. (in Chinese).