DOI QR코드

DOI QR Code

Evaluation of Beam Behavior with External Bonded L-type GFRP Plate through bending Test

L형 GFRP 외부부착 보강된 보의 휨 실험을 통한 보강 거동분석

  • Jeong, Yeong-Seok (Department of Civil Engineering, ERI, Gyeongsang National University) ;
  • Kwon, Min-Ho (Department of Civil Engineering, ERI, Gyeongsang National University) ;
  • Kim, Jin-Sup (Department of Civil Engineering, ERI, Gyeongsang National University) ;
  • Nam, Gwang-sik (Department of Civil Engineering, ERI, Gyeongsang National University)
  • Received : 2020.09.29
  • Accepted : 2020.11.06
  • Published : 2020.11.30

Abstract

The demand for maintenance in Korea infrastructure facilities constructed since the 1970s has increased significantly compared to the demand for new construction. Moreover, after the Gyeongju and Pohang earthquakes, seismic performance evaluation, repair, and retrofitting projects have been carried out. Therefore, in this study, a specimen was designed following the L-type GFRP Plate Externally Bonded Retrofit method, one among other retrofit methods. The L-type GFRP Plate was bonded to the specimen by epoxy and a washered steel nail. A four-point bending test was performed to confirm the strengthening effect of the Externally Bonded Retrofit method using an L-type GFRP Plate. The strengthening effect of the L-type GFRP plate was proven experimentally, and the behavior of the beam designed following the L-type GFRP Plate Externally Bonded Retrofit method was evaluated according to Korea's "Design Manual & Specification for Strengthening of RC Structures by Advanced Composites System". Furthermore, the effectiveness of the bonding method, a combination of epoxy and washered steel nail, was also checked. The results showed that the design, according to the guidelines mentioned above, predicted the strength of the member well, but the failure mode did not satisfy the design assumption because of unexpected damage to the GFRP plate due to the fixing method, washered steel nail.

국내 사회기반 시설물의 경우 70년대 이후로 건설되어 향후 신규건설에 대한 수요보다 유지보수에 대한 수요가 크게 증가할 것으로 전망된다. 더욱이 경주지진과 포항지진 이후로 과거 시공된 시설물의 내진성능에 대한 평가 및 보수 보강 사업이 이루어지고 있다. 본 연구에서는 보강공법 중 L형 GFRP 외부부착공법을 대상으로 하여 시험체를 설계하고, 에폭시와 화약식 타정 총으로 압력 핀을 시공하는 방법으로 외부부착된 L형 GFRP Plate의 보강효과를 확인하기 위하여 4점 휨 시험을 수행하였다. 실험결과를 바탕으로 L형 GFRP Plate의 보강효과를 확인하고, 국내의 "복합신소재시스템에 의한 철근콘크리트구조물의 보강설계 및 시공 지침서"에 따라 L형 GFRP 외부부착공법이 적용된 보의 거동에 대하여 평가하고 에폭시와 압력 핀을 조합하여 시공하는 부착방법의 효용성을 평가하였다. 실험 결과를 분석한 결과 지침에 따른 설계는 부재의 강도를 잘 예측하는 것으로 나타났으나, GFRP Plate 보강재의 손상을 동반하는 고정법의 사용으로 인하여 설계가정의 조건을 만족하는 파괴가 일어나지 않는 것으로 분석하였다.

Keywords

References

  1. W. T. Jung, Development of Bridge Strengthening Method using Prestressed FRP Composites, Annual Report(KICT 2016-05), Korea Institute Of Construction Technology, Korea. DOI: https://doi.org/10.23000/TRKO201700000968
  2. R.Kotynia, S.Cholostiakow, "New Proposal for Flexural Strengthening of Reinforced Concrete Beams Using CFRP T-Shaped Profiles", polymers, 7(11), 2461-2477, 2015. DOI: https://doi.org/10.3390/polym7111524
  3. J. R. Cho, Y. H. Park, S. Y. Park, C. W. Park, "Development of Design Guidelines for FRP Reinforced Concrete Structure and Application of FRP Reinforcement in Korea", Magazine of the Korea Concrete Institute, 30(6), pp.81-86, 2018. http://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE07571350
  4. G. H. Hong, "Construction Method Improvement of the FRP-plate Strengthening Method using the Velcro", Journal of the Korea Institute for Structural Maintenance and Inspection, 12(6), pp.225-232, 2008. http://uci.kci.go.kr/resolution/result.do?res_cd=G704-000667.2008.12.6.005
  5. Korean Society for Advanced Composite Structures, Design Manual & Specification for Strengthening of RC Structures by Advanced Composites System, pp.116, donghwa Publishers, 2017, pp.1-69.
  6. J. W. Lim, Insulation Method for fire Resistance of RC Members Strengthened by FRP, Master's thesis, Korea National University of Transportation, Chungju, Korea, 2016.
  7. J. H. Jo, Behavior of Strengthened RC Beams with anchored AFRP (Aramid Fiber Reinforced Polymer) Sheet, Master's thesis, Chungbuk National University Graduate School of Industry, Chungju, Korea, 2013.3.