DOI QR코드

DOI QR Code

복합영상관 단일 가연물의 디자인 화재곡선 평가

Evaluation of Design Fire Curves for Single Combustibles in a Cinema Complex

  • 투고 : 2020.03.19
  • 심사 : 2020.04.14
  • 발행 : 2020.06.30

초록

국내 복합영상관의 단일 가연물을 대상으로 실물 화재실험이 수행되었으며, 측정된 열발생률(HRR)에 대한 디자인 화재곡선 방법(General 및 2-stage methods)에 따른 최대 HRR 및 화재성장률에 대한 정량적 차이가 검토되었다. 가연물의 용도 및 화재하중의 관점에서 대기공간과 영화상영관으로 구분되어, 총 12개의 가연물이 선정되었다. 주요 결과로서, 2-stage method 통해 산출된 최대 HRR 및 화재성장률은 General method의 결과와 정량적으로 큰 차이가 있음을 확인하였다. 초기 화재단계의 보다 정확한 화재성장률을 고려할 수 있는 2-stage method의 활용은 정확한 ASET과 RSET 뿐만 아니라 화재감지기 및 소화설비의 작동시간을 보다 정확히 예측하는데 매우 유용할 것으로 기대된다.

An actual fire test was performed on single combustibles placed in a local cinema complex, and quantitative differences in the maximum heat release rate (HRR) and fire growth rate were investigated based on the design fire curve methods (i.e., the general and 2-stage methods). In terms of combustible use and fire load, a total of 12 combustibles were selected, classified into cinema lounge and movie theater. It was found that the maximum HRR and fire growth rate determined using the two-stage method were quantitatively different from those of the general method. The application of the two-stage method, which can be used to determine the fire growth rate of the initial fire stage more precisely, could be useful in accurately predicting the activation time of fire detectors and fire-extinguishing facilities, as well as the available safe egress time (ASET) and required safe egress time (RSET).

키워드

참고문헌

  1. K. H. Kim, S. H. Lee, H. Y. Kim, T. H. Song and B. K. Jin, "Establishment of Building Fire Safety System Improvement of Building Fire Safety Regulations", KICT 2000-082, Korea Institute of Construction Technology, pp. 31-37 (2000).
  2. H. S. Han and C. H. Hwang, "Study on the Available Safe Egress Time (ASET) Considering the Input Parameters and Model Uncertainties in Fire Simulation", Fire Science and Engineering, Vol. 33, No. 3, pp. 112-120 (2019). https://doi.org/10.7731/KIFSE.2019.33.3.112
  3. V. Babrauskas and R. D. Peacock, "Heat Release Rate: The Single Most Important Variable in Fire Hazard", Fire Safety Journal, Vol. 18, No. 3, pp. 255-272 (1992). https://doi.org/10.1016/0379-7112(92)90019-9
  4. W. Jahn, G. Rein and J. Torero, "The Effect of Model Parameters on the Simulation on Fire Dynamics", Fire Safety Science-Proceedings of the Ninth International Symposium, pp. 1341-1352 (2008).
  5. J. H. Cho, C. H. Hwang, J. Kim and S. Lee, "Sensitivity Analysis of FDS Results for the Input Uncertainty of Fire Heat Release Rate", Journal of the Korea Society of Safety, Vol. 31, No. 1, pp. 25-32 (2016). https://doi.org/10.14346/JKOSOS.2016.31.1.025
  6. H. Y. Jang and C. H. Hwang, "Revision of the Input Parameters for the Prediction Models of Smoke Detectors Based on the FDS", Fire Science and Engineering, Vol. 31, No. 2, pp. 44-51 (2017). https://doi.org/10.7731/KIFSE.2017.31.5.044
  7. H. -J. Kim and D. G. Lilley, "Heat Release Rates of Burning Items in Fires", 38th Aerospace Sciences Meeting and Exhibit, AIAA 2000-0722, pp. 1-25 (2000).
  8. B. N. Baek, C. B. Oh, E. J. Lee and D. G. Nam, "Application Study of Design Fire Curves for Liquid Pool Fires in a Compartment", Fire Science and Engineering, Vol. 31, No. 4, pp. 43-51 (2017). https://doi.org/10.7731/KIFSE.2017.31.4.043
  9. B. N. Baek, C. B. Oh and C. Y. Lee, "Evaluation of Modified Design Fire Curve for Liquid Pool Fires Using the FDS and CFAST", Fire Science and Engineering, Vol. 32, No. 2, pp. 7-16 (2018).
  10. S. H. An, S. Y. Mun, I. H. Ryu, J. H. Choi and C. H. Hwang, "Analysis on the Implementation Status of Domestic PBD (Performance Based Design) - Focusing on the Fire Scenario and Simulation", Journal of the Korean Society of Safety, Vol. 32, No. 5, pp. 32-40 (2017). https://doi.org/10.14346/JKOSOS.2017.32.5.32
  11. Y. H. Yoo, H. R. Kim and H. J. Shin, "A Study on the Vehicle Fire Property using the Large Scale Calorimeter", Journal of Korean Tunnelling and Underground Space Association, Vol. 9, No. 4, pp. 343-349 (2007).
  12. S. G. Kang, D. E. Kim, D. G. Seo, D. J. Kim, J. H. Kim and Y. J. Kwon, "A Study on the Experimental to Establish Combustion Properties DB Accordance to Vehicle Model Categorizes at Parking Space", Journal of the Korean Society of Hazrard Mitigation, Vol. 14, No. 1, pp. 27-33 (2014).
  13. O. S. Kweon, Y. H. Yoo, H. Y. Kim and J. H. Kim, "Real Scale Experiment for Assessing Fire Model of Office Compartment", Journal of KOSHAM, Vol. 12, No. 6, pp. 61-65 (2012).
  14. D. G. Nam and C. H. Hwang, "Measurements of the Heat Release Rate and Fire Growth Rate of Combustibles for the Performance-Based Design - Focusing on the Combustibles in Residential and Office Spaces", Fire Science and Engineering, Vol. 31, No. 2, pp. 29-36 (2017).
  15. B. I. Choi, Y. S. Han and M. B. Ki, "Heat Release Rate Measurements of Residential Combustibles Using Oxygen Consumption Method", Journal of Korean Institute of Fire Science & Engineering, Vol. 22, No. 2, pp. 104-107 (2008).
  16. S. R. Lee, "A Study on Fire Behavior of Combustibles in a Residential Building", Journal of Korean Institute of Fire Science & Engineering, Vol. 23, No. 4, pp. 25-31 (2009).
  17. S. C. Kim, D. G. Nam, C. H. Hwang, M. O. Yoon, G. H. Ko, J. Y. Kim, S. Y. Choi, J. J. Jung, et al., "Validation and Reliability Analysis of Guideline of Performance Based Fire Protection Design of a Super Tall Building", NEMA-2012-35, National Emergency Management Agency (2014).
  18. J. H. Kim, S. Y. Joo and J. J. Lee, "An Evaluation on Evacuation Safety in Multiplex Cinema based on Fire & Evacuation Simulation", Korean Institute of Architectural Sustainable Environment and Building Systems, Vol. 1, No. 1, pp. 7-13 (2007).
  19. Y. M. Shin, Y. R. Lim and Y. H. Ahn, "A Study on the Optimization Method for Evacuation Procedure on Fire in Public Facilities -Focusing on Multiplex-", Fire Science and Engineering, Vol. 33, No. 1, pp. 113-120 (2019). https://doi.org/10.7731/KIFSE.2019.33.1.113
  20. ISO/TC 92, "Reaction to Fire Tests - Room Corner Test for Wall and Ceiling Lining Products - Part 1: Test Method for a Small Room Configuration", ISO 9705-1:2016(en) (2016).
  21. C. Huggett, "Estimation of the Rate of Heat Release Rate by Means of Oxygen Consumption", Journal of Fire and Flammability, Vol. 12, pp. 61-65 (1980).
  22. H. Y. Jang and D. G. Nam, "Measurements of the Heat Release Rate and Fire Growth Rate of Combustibles for the Performance-Based Design -Focusing on the Plastic Fire of Commercial Building", Fire Science and Engineering, Vol. 32, No. 6, pp. 55-62 (2018). https://doi.org/10.7731/KIFSE.2018.32.6.055