Journal of the Korean Society of Marine Environment & Safety (해양환경안전학회지)

The Korean Society of Marine Environment and safety (해양환경안전학회)
권호 표지
DOI QR코드

DOI QR Code

Design Verification Method of Offshore Separation Systems Based on System Dynamics

시스템 다이내믹스 기반 해양구조물 분리시스템의 설계검증 방법에 관한 연구

  • Hwang, John-Kyu (Department of Ocean System Engineering, Graduate School, Mokpo National Maritime University) ;
  • Ko, Jae-Yong (Department of Naval Architecture and Ocean Engineering, Mokpo National Maritime University) ;
  • Lee, Dong-Kun (Department of Naval Architecture and Ocean Engineering, Mokpo National Maritime University) ;
  • Park, Bon-Yeong (Department of Ocean System Engineering, Graduate School, Mokpo National Maritime University)
  • 황존규 (목포해양대학교 대학원) ;
  • 고재용 (목포해양대학교 조선해양공학과) ;
  • 이동건 (목포해양대학교 조선해양공학과) ;
  • 박본영 (목포해양대학교 대학원)
  • Received : 2020.07.22
  • Accepted : 2020.10.28
  • Published : 2020.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes a design verification method based on system dynamics for offshore separation systems. Oil and gas separation systems are key components of offshore oil platforms; these systems determine the competitiveness of engineering, procurement, and construction (EPC) projects, especially in terms of added value. However, previous research on design verification has been limited to the process and deliverables of design. To address this, the study aims to develop a comprehensive design verification method and the associated functions from the perspective of project management, for the entire project life-cycle of offshore structures. The proposed methodology for design verification is expected to contribute toward effective and detailed designs as well as improve the competitiveness of EPC companies in constructing of shore structures during the early design stages. We first analyzed the separation system of the FPSO using the design verification method adopted by advanced countries and compared it with the system dynamics process formalized as ISO 15288. Subsequently, a tailored process for the design verification of the offshore structure was derived. It is shown that the proposed design verification method can be applied to the front-end engineering design process of of shore structures. Moreover, it can contribute toward the successful performance of offshore projects in the future and also minimize design changes and critical risks during the construction of these offshore structures.

본 연구는 시스템 다이내믹스를 기반으로 해양구조물 분리시스템(Separation system)의 설계검증 방법을 제안하였다. 해양구조물 분리시스템은 부가가치 측면에서 EPC 프로젝트의 성공 여부를 결정할 수 있는 상부구조(Topsides)의 가장 중요한 시스템 중 하나이다. 그럼에도 불구하고, 설계검증에 대한 지금까지의 실태는 설계 작업의 프로세스 진행이나 도면작성 및 제공에 국한되어 있어 기본설계 단계에서 설계검증의 미흡으로 인하여 계약 후 잦은 설계변경에 의한 기업손실이 발생되어 왔다. 이러한 맥락에서 본 연구의 목적은 해양구조물의 전체 프로젝트 수행 기간에 성공적인 사업수행을 도모하고자 설계검증 모델을 구축하여 적용하도록 하였다. 제안된 설계검증 방법은 상세 설계의 효과적인 실행뿐만 아니라 초기설계 단계에서 기술적 오류나 불일치 사항을 미리 찾아냄으로써 해양구조물의 엔지니어링, 조달 및 건조에 대한 경쟁력을 향상시키는데 기여 할 것으로 예상한다. 본 연구에서는 먼저 건조한 실적선 자료를 바탕으로 설계검증을 수행하여 FPSO 분리시스템에 적용하고 ISO 15288 국제 표준을 준수하였다. 결과적으로, 제안된 설계검증 방법이 해양구조물의 FEED 검증 프로세스에 적용될 수 있으며, 향후 해양 프로젝트의 성공적인 수행에 의한 이익창출을 도모할 수 있을 것이다. 또한, 해양구조물 건조 시 설계변경에 의한 막대한 손실을 최소화 할 수 있을 것으로 기대한다.

Keywords

References

  1. Gourdet, G.(2008), Connection Hull-Topsides: Principles, Designs and Returns of Experience, Bureau Veritas.
  2. Henriksen, L. O., B. D. Williams, X. Wang, and D. Liu(2008), Structural Design and Analysis of FPSO Topside Module Supports, ABS Technical Paper.
  3. Hwang, J. K., M. I. Roh, and K. Y. Lee(2010), Detailed Design and Construction of the Hull of an FPSO (Floating, Production, Storage, and Off-loading unit), Ships and Offshore Structures, Vol. 5, No. 2, pp. 93-104. https://doi.org/10.1080/17445300903169168
  4. Jang, B. S. and D. E. Ko(2018), A Study on the Structural Behavior of FPSO Topside Module by Support Condition, Journal of the Korea Academia-Industrial Cooperation Society Vol. 19, No. 11 pp. 18-23. https://doi.org/10.5762/KAIS.2018.19.11.18
  5. Jin, Y.(2013), A Study on Probabilistic Scenario Based Fire Risk Analysis for FPSO Structure, Proceedings of the 27th Asian-Pacific Technincal Exchange and Advisory Meeting on Marine Structures, TEAM 2013.
  6. Kim, G. C., G. Y. Jeong, and S. W. Kim(2007), System Dynamics using the Vensim(R), Seoul Economy and Management, Vol. 1, pp. 1-5.
  7. Ko, M. S.(2016), FEED Maturity Evaluation Method, The Korean Society of Ocean Engineers Conference, Busan BEXCO, Korea.
  8. Roh, M. I., J. H. Hwang, J. H. Cha, and K. Y. Lee(2010), Offshore Process FEED Method for Integrated Process Engineering, Journal of the Society of Naval Architects of Korea, Vol. 47, No. 2, pp. 265-277. https://doi.org/10.3744/SNAK.2010.47.2.265
  9. Roy, Kumar D., Arun Kr Dev, and Seref Aksu(2010), Installation Engineering of Topside Modules on Ship Shaped Offshore Floating Structures, Proceedings of 4th PAAMES and AMEC2010 Dec. 6-8, 2010, Singapore.
  10. Trouchton, M., A. Rouhan, and J. Goyet(2007), Risk Based Inspection Approach for Topside Structural Components, Offshore Technology Conference.