DOI QR코드

DOI QR Code

Dynamic current control using synchronous pulse-width modulation for permanent magnet machines

  • Choi, Hyeon-gyu (Department of Electrical and Computer Engineering, Seoul National University) ;
  • Ha, Jung-Ik (Department of Electrical and Computer Engineering, Seoul National University)
  • Received : 2019.07.22
  • Accepted : 2019.10.11
  • Published : 2020.03.20

Abstract

It is difficult to use the conventional fixed sampling pulse-width modulation (PWM) method in a motor drive system due to the harmonics and beat phenomenon when the number of switchings is low. Synchronous PWM is a solution to overcome these problems. However, it is difficult to implement a closed-loop current controller, since synchronous PWM only has merits when the switching frequency is synchronized with the operation speed. This paper proposes a closed-loop current controller for synchronous permanent magnet machines which are driven by synchronous PWM. The proposed controller uses the concept of variable time step control. The control variables are the sampling time interval and the output voltage magnitude. The proposed controller dynamically controls the dq-currents, while the steady-state merits of the synchronous PWM are maintained. This paper presents the design procedures and a dynamic analysis of the proposed current controller. The effectiveness of the proposed method is verified by experimental results.

Keywords

Acknowledgement

This work was supported by the Brain Korea 21 Plus Project in 2019. This research was supported by the Seoul National University Electric Power Research Institute.

References

  1. Dae-Woong, C., Joohn-Sheok, K., Seung-Ki, S.: Unified voltage modulation technique for real-time three-phase power conversion. IEEE Trans. Ind. Appl. 34(2), 374-380 (1998) https://doi.org/10.1109/28.663482
  2. Holtz, J.: Pulsewidth modulation-a survey. IEEE Trans. Ind. Electron. 39(5), 410-420 (1992) https://doi.org/10.1109/41.161472
  3. Gerada, D., Mebarki, A., Brown, N.L., Gerada, C., Cavagnino, A., Boglietti, A.: High-speed electrical machines: technologies, trends, and developments. IEEE Trans. Ind. Electron. 61(6), 2946-2959 (2014) https://doi.org/10.1109/TIE.2013.2286777
  4. Steimel, A.: Direct self-control and synchronous pulse techniques for high-power traction inverters in comparison. IEEE Trans. Ind. Electron. 51(4), 810-820 (2004) https://doi.org/10.1109/TIE.2004.831730
  5. Stumpf, P., Jardan, R.K., Nagy, I.: Subharmonics generated by space vector modulation in ultrahigh speed drives. IEEE Trans. Ind. Electron. 59(2), 1029-1037 (2012) https://doi.org/10.1109/TIE.2011.2148683
  6. Ke, Z., Zhang, J., Raich, R.: Low-frequency current oscillation reduction for six-step operation of three-phase inverters. IEEE Trans. Power Electron. 32(4), 2948-2956 (2017) https://doi.org/10.1109/TPEL.2016.2570214
  7. Iwaji, Y., Sukegawa, T., Okuyama, T., Ikimi, T., Shigyo, M., Tobise, M.: A new PWM method to reduce beat phenomenon in large-capacity inverters with low switching frequency. IEEE Trans. Ind. Appl. 35(3), 606-612 (1999) https://doi.org/10.1109/28.767011
  8. Narayanan, G., Ranganathan, V.T.: Synchronised PWM strategies based on space vector approach. I. Principles of waveform generation. IEE Proc. Electr. Power Appl. 146(3), 267-275 (1999) https://doi.org/10.1049/ip-epa:19990118
  9. Narayanan, G., Ranganathan, V.T.: Synchronised PWM strategies based on space vector approach. II. Performance assessment and application to V/f drives. IEE Proc. Electr. Power Appl. 146(3), 276-281 (1999) https://doi.org/10.1049/ip-epa:19990119
  10. Yang, H., Zhang, Y., Yuan, G., Walker, P.D., Zhang, N.: Hybrid synchronized PWM schemes for closed-loop current control of high-power motor drives. IEEE Trans. Ind. Electron. 64(9), 6920-6929 (2017) https://doi.org/10.1109/TIE.2017.2686298
  11. Park, J., Jung, S., Ha, J.I.: Variable time step control for six-step operation in surface mounted permanent magnet machine drives. IEEE Trans. Power Electron. 33(99), 1501-1513 (2017) https://doi.org/10.1109/TPEL.2017.2676703
  12. Jung, S., Park, J., Chung, E., Ha, J.I.: Variable time step control with synchronous PWM in low frequency modulation index for AC machine drive. In: 2016 IEEE Energy Conversion Congress and Exposition (ECCE), pp. 1-8 (2016)
  13. Miyajima, T., Fujimoto, H., Fujitsuna, M.: A precise model-based design of voltage phase controller for IPMSM. IEEE Trans. Power Electron. 28(12), 5655-5664 (2013) https://doi.org/10.1109/TPEL.2013.2259262
  14. Kim, H., Degner, M.W., Guerrero, J.M., Briz, F., Lorenz, R.D.: Discrete-time current regulator design for AC machine drives. IEEE Trans. Ind. Appl. 46(4), 1425-1435 (2010) https://doi.org/10.1109/TIA.2010.2049628
  15. Bon-Ho, B., Seung-Ki, S.: A compensation method for time delay of full-digital synchronous frame current regulator of PWM AC drives. IEEE Trans. Ind. Appl. 39(3), 802-810 (2003) https://doi.org/10.1109/TIA.2003.810660
  16. Bohn, C., Atherton, D.P.: An analysis package comparing PID anti-windup strategies. IEEE Control Syst. 15(2), 34-40 (1995) https://doi.org/10.1109/37.375281
  17. Hanus, R., Kinnaert, M., Henrotte, J.-L.: Conditioning technique, a general anti-windup and bumpless transfer method. Automatica 23(6), 729-739 (1987) https://doi.org/10.1016/0005-1098(87)90029-X
  18. Choi, H., Hong, J., Ha, J.: Synchronous space vector voltage modulation of three-phase inverter with low switching number. In: 2018 IEEE Transportation Electrification Conference and Expo (ITEC), pp. 436-441 (2018)