DOI QR코드

DOI QR Code

Predictive control with optimal vector sequence for permanent magnet synchronous motors

  • Li, Chen (School of Electrical and Information Engineering, Tianjin University) ;
  • Shi, Ting-Na (College of Electrical Engineering, Zhejiang University) ;
  • Yan, Yan (College of Electrical Engineering, Zhejiang University) ;
  • Zhou, Zhan-Qing (School of Electrical Engineering and Automation, Tiangong University) ;
  • Xia, Chang-Liang (School of Electrical Engineering and Automation, Tiangong University)
  • Received : 2019.07.23
  • Accepted : 2019.11.07
  • Published : 2020.03.20

Abstract

Conventional model predictive control aims to minimize ripples of the torque, stator flux and current at the end instant of each control period. However, the trajectories of the torque and flux during the entire control period are changed when multiple voltage vectors are applied in different sequences in each period. This indicates that the ripples of the torque and stator flux are influenced by different vector sequences (i.e., the sequence multiple vectors applied in). For that issue, this paper analyzes the RMS values of the stator flux vector ripple when three basic vectors are applied in different five-segment sequences, and proposes a predictive control with optimal vector sequence method. Based on this analysis, the available vector sequences that reduce the stator flux vector ripple are screened out. Moreover, a cost function is constructed to select the optimal vector sequence by evaluating the stator flux ripple during the entire control period and the tracking error of the stator flux vector at the end instant of each control period. Finally, simulation and experimental results verify the effectiveness of the proposed method.

Keywords

Acknowledgement

The authors are grateful to the Key Project in the Major Program of National Natural Science Foundation of China (51690183), and the National Natural Science Foundation of China (51907142) for supporting this work.

References

  1. Feng, G., Lai, C., Kar, N.C.: A closed-loop fuzzy-logic-based current controller for PMSM torque ripple minimization using the magnitude of speed harmonic as the feedback control signal. IEEE Trans. Ind. Electron. 64(4), 2642-2653 (2017) https://doi.org/10.1109/TIE.2016.2631524
  2. Xu, Y., Hou, Y., Li, Z.: Robust predictive speed control for SPMSM drives based on extended state observers. J. Power Electron. 19(2), 497-508 (2019) https://doi.org/10.6113/JPE.2019.19.2.497
  3. Mehdi, A., Reama, A., Benalla, H.: Two vector based direct power control of AC/DC grid connected converters using a constant switching frequency. J. Power Electron. 17(5), 1363-1371 (2017) https://doi.org/10.6113/JPE.2017.17.5.1363
  4. Zhao, B., Li, H., Mao, J.: Double-objective finite control set model-free predictive control with DSVM for PMSM drives. J. Power Electron. 19(1), 168-178 (2019) https://doi.org/10.6113/JPE.2019.19.1.168
  5. Zhang, Y., Xu, D., Liu, J.: Performance improvement of model-predictive current control of permanent magnet synchronous motor drives. IEEE Trans. Ind. Appl. 53(4), 3683-3695 (2017) https://doi.org/10.1109/TIA.2017.2690998
  6. Davari, S.A., Khaburi, D.A., Kennel, R.: An improved FCS-MPC algorithm for an induction motor with an imposed optimized weighting factor. IEEE Trans. Power Electron. 27(3), 1540-1551 (2012) https://doi.org/10.1109/TPEL.2011.2162343
  7. Zhang, Y., Yang, H.: Generalized two vector based model predictive torque control of induction motor drives. IEEE Trans. Power Electron. 30(7), 3818-3829 (2015) https://doi.org/10.1109/TPEL.2014.2349508
  8. Zhang, Y., Yang, H.: Two-vector-based model predictive torque control without weighting factors for induction motor drives. IEEE Trans. Power Electron. 31(2), 1381-1390 (2016) https://doi.org/10.1109/TPEL.2015.2416207
  9. Zhang, Y., Xu, D., Huang, L.: Generalized multiple-vector- based model predictive control for PMSM drives. IEEE Trans. Ind. Electron. 65(12), 9356-9366 (2018) https://doi.org/10.1109/tie.2018.2813994
  10. Zhang, X., Hou, B., He, Y., et al.: Model predictive torque control of surface mounted permanent magnet synchronous motor drives with voltage cost functions. J. Power Electron. 18(5), 1369-1379 (2018) https://doi.org/10.6113/JPE.2018.18.5.1369
  11. Wang, Y., Wang, X., Xie, W.: Deadbeat model-predictive torque control with discrete space vector modulation for PMSM drives. IEEE Trans. Ind. Electron. 64(5), 3537-3547 (2017) https://doi.org/10.1109/TIE.2017.2652338
  12. Xia, C., Wang, S., Wang, Z.: Direct torque control for VSI-PMSMs using four dimensional switching table. IEEE Trans. Power Electron. 31(8), 5774-5785 (2016) https://doi.org/10.1109/TPEL.2015.2498207
  13. Zhu, H., Xiao, X., Li, Y.: Torque ripple reduction of the torque predictive control scheme for permanent-magnet synchronous motors. IEEE Trans. Ind. Electron. 59(2), 871-877 (2012) https://doi.org/10.1109/TIE.2011.2157278
  14. Lee, J.S., Choi, C.-H., Seok, J.-K., Lorenz, R.D.: Deadbeat-direct torque and flux control of interior permanent magnet synchronous machines with discrete time stator current and stator flux linkage observer. IEEE Trans. Ind. Appl. 47(4), 1749-1758 (2011) https://doi.org/10.1109/TIA.2011.2154293
  15. Vazquez, S., Marquez, A., Aguilera, R.: Predictive optimal switching sequence direct power control for grid-connected power converters. IEEE Trans. Ind. Electron. 62(4), 2010-2020 (2015) https://doi.org/10.1109/TIE.2014.2351378
  16. Aurtenechea, S., Rodriguez, M.A., Oyarbide, E.: Predictive direct power control-a new control strategy for DC-AC converters. In: Proceedings of 32nd Annual Conference on IEEE Industrial Electronics, pp. 1661-1666 (2006)
  17. Basu, K., Prasad, J.S.S., Narayanan, G.: Minimization of torque ripple in PWM AC drives. IEEE Trans. Ind. Electron. 56(2), 553-558 (2009) https://doi.org/10.1109/TIE.2008.2004391
  18. Basu, K., Prasad, J.S.S., Narayanan, G., Krishnamurthy, H.K., Ayyanar, R.: Reduction of torque ripple in induction motor drives using an advanced hybrid PWM technique. IEEE Trans. Ind. Electron. 57(6), 2085-2091 (2010) https://doi.org/10.1109/TIE.2009.2034183
  19. Narayanan, G., Krishnamurthy, H.K., Zhao, D.: Advanced bus-clamping PWM techniques based on space vector approach. IEEE Trans. Power Electron. 21(4), 974-984 (2006) https://doi.org/10.1109/TPEL.2006.876854
  20. Stojic, D., Milinkovic, M., Veinovic, S., Klasnic, I.: Improved stator flux estimator for speed sensorless induction motor drives. IEEE Trans. Power Electron. 30(4), 2363-2371 (2015) https://doi.org/10.1109/TPEL.2014.2328617
  21. Cortes, P., Kouro, S., Rocca, B.L., et al.: Guidelines for weighting factors design in model predictive control of power converters and drives. In: Proceedings of IEEE International Conference on Industrial Technology (2009)
  22. Xie, W., Wang, X., Wang, F.: Finite-control-set model predictive torque control with a deadbeat solution for PMSM drives. IEEE Trans. Ind. Electron. 62(9), 5402-5410 (2015) https://doi.org/10.1109/TIE.2015.2410767