Journal of Power Electronics

The Korean Institute of Power Electronics (전력전자학회)
권호 표지
DOI QR코드

DOI QR Code

Position control for sliding roof systems to reduce vibration

  • Jeong, Jae-Pil (Department of Railway System Engineering, Kyungsung University) ;
  • Lee, Dong-Hee (Department of Mechatronics Engineering, Kyungsung University)
  • Received : 2019.08.01
  • Accepted : 2019.09.16
  • Published : 2020.01.20
⟨ Previous Next ⟩

Abstract

This paper presents a time-based instantaneous position control scheme for a sliding roof system driven by a permanent magnet synchronous motor (PMSM) to reduce the mechanical vibrations of the structure. The proposed algorithm consists of two reference generators. The first generator is used to determine the roof movement pattern and the maximum speed of the motor, which become the inputs of the second generator. The second generator takes these values and gives out an instantaneous rotating speed reference to the motor and an instantaneous roof position reference. The acceleration/deceleration patterns made by the first generator follow the shape of a cosine function to minimize vibration. Furthermore, the instantaneous roof position reference is compared to the actual value obtained with a motor encoder to calculate the position error, which becomes an input for the speed controller of the PMSM. First, a detailed analysis of a sliding roof system and the proposed control method are presented. Then, a PMSM was installed to an actual sliding roof system and experiments were done to verify the proposed method. Both simulation and experiment results show that the sliding roof moves smoothly with less vibration and that the proposed position control produces a more precise result when compared to that of the conventional method.

Keywords

Acknowledgement

This research was supported by Korea Electric Power Corporation (Grant number: R19XO01-06) and BB21+ Project in 2019.

References

  1. Shon, S.D., Lee, S.J., Hwang, K.J.: Driving mechanism and system of steel retractable roof structure. Archit. Inst. Korea 36(2), 1654-1655 (2016)
  2. Bae, J.N., Kwak, Y.C., Lee, D.H.: Position controller of rail guided unmanned monitoring system with the driving slip compensator. Trans. Korean Inst. Electr. Eng. 66(5), 792-799 (2017) https://doi.org/10.5370/KIEE.2017.66.5.792
  3. Kim, J.H., Cho, K.Y., Kim, H.W.: Torque ripple reduction algorithm of PM synchronous motor at high speed operation. J. Power Electron. 20(5), 429-436 (2015)
  4. Nam, M.J., Kim, J.H., Cho, K.Y., Kim, H.W., Cho, Y.H.: Torque ripple reduction of an interior pm synchronous motor by compensating harmonic currents based on flux linkage harmonics. J. Power Electron. 17(5), 1223-1230 (2017) https://doi.org/10.6113/JPE.2017.17.5.1223
  5. Kim, H.S., Han, J.H., Song, J.H.: Torque ripple reduction of interior permanent-magnet synchronous motors driven by torque predictive control. J. Korean Inst. Illum. Electr. Install. Eng. 27(2), 102-109 (2013)
  6. Jeon, K.W., Hahn, S.C.: Compare with torque characteristic and efficiency of IM and IPMSM for EV drive, pp. 1105-1106. The Korean Institute of Electrical Engineers (KIEE), South Korea (2011)
  7. Akar, M.: Detection of rotor bar faults in field oriented controlled induction motors. J. Power Electron. 12(6), 982-991 (2012) https://doi.org/10.6113/JPE.2012.12.6.982
  8. Mun, G.B., Seo, D.W., Lee, K.B.: Maximum torque per ampere control for interior permanent magnet synchronous motor, pp. 165-166. The Korean Institute of Electrical Engineers (KIEE), South Korea (2018)
  9. Jin, K.H., Kim, S.J., Yi, D.H., Kwon, S.H., Kim, Y.H.: Maximum torque per ampere operation of IPMSM drives for the next generation high speed railway system, pp. 1262-1270. The Korean Institute of Electrical Engineers (KIEE), South Korea (2010)
  10. Qiu, X., Zhao, W., Chen, Q., Xu, D.: Mover field oriented control of linear permanent-magnet vernier motor considering loss minimization. J. Electr. Eng. Technol. 12(3), 1114-1123 (2017) https://doi.org/10.5370/JEET.2017.12.3.1114
  11. Bae, J.N., Lee, D.H.: A position control of BLDC motor in a rail guided system for the un-maned facility security. J. Power Electron. 22(3), 223-230 (2017)
  12. Kim, S.U., You, W.S., Kim, Y.S.: Chattering reduction of sliding mode controller using binary disturbance observer. Trans. Korean Inst. Electr. Eng. 22(3), 1110-1116 (2017)
  13. Song, K.Y., Cho, K.Y., Kim, H.W., Oh, H.C.: Position control algorithm of a PMSM for the elevator door system. J. Power Electron. 14(1), 17-18 (2012)
  14. Li, Q., Xu, Q., Wu, R.: Low-frequency vibration suppression control in a two-mass system by using a torque feed-forward and disturbance torque observer. J. Power Electron. 16(1), 249-258 (2016) https://doi.org/10.6113/JPE.2016.16.1.249
  15. Kim, E.C., Lee, J.A., Lee, H.H.: A study on running resistance of rolling stock. Korean Soc. Railway 27(2), 1782-1793 (2008)