Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Fine Particle Dispensing Conditions for a Spiral Surface of Round Aluminum Bars

알루미늄 환봉의 나선형 표면 미세입자 분사가공의 조건에 대한 연구

  • Received : 2020.05.27
  • Accepted : 2020.06.25
  • Published : 2020.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

The goal of this study is to determine the influence of major factors on the spiral surface microparticle injection machining of cylindrical specimens by the statistical method ANOVA. Before the experiment, rod-shaped test specimens and jigs for helical surface spraying were prepared, and the surface roughness was measured with a surface roughness meter. The injection particle, nozzle diameter, and injection pressure were the primary parameters of the experiment. Other factors that were considered were injection height, injection time, revolutions, and feed distance. The surface roughness after machining was measured, and the effects of the surface roughness data on the primary factors were determined with ANOVA.

Keywords

References

  1. Choi, S. Y., Kwon, D. G., Park, I. S., Wang, D. H., "A study on the optimal conditions for machining accuracy when endmill fillet cutting at the corner", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15 No. 4, pp. 101-108, 2016. https://doi.org/10.14775/ksmpe.2016.15.4.101
  2. Yun,, J. D., Wang, D. H., Ahn,, Y. C., Go, C. H., "Electrical Discharge Machining of Alumina Ceramic Matrix Composites Containing Electro-conductive Titanium Carbide as a Second Phase", Journal of the Korean Ceramic Society, Vol. 34, No.10, pp. 1092-1098, 1997.
  3. Jang, H. S., Kim, H. S., Shin, K. H., "A Study on Performance Improvement of Electrical Discharge Machining for Producing Micro-holes Using a Shot Blasting Surface Treatment", Journal of the The Korean Society for Technology of Plasticity., Vol. 21 No. 5, pp. 312-318, 2012.
  4. Kwon, D. G., Wang, D. H., "Optimal Blasting Conditions for Surface Profile when Micro Particle Blasting by Statistical Analysis of Orthogonal Arrays", Journal of the Korean Society of Manufacturing Process Engineers., Vol. 15, No. 4, pp. 148-154, 2016. https://doi.org/10.14775/ksmpe.2016.15.4.148
  5. Kim, S. H., Wang, D. H., Lee,, S. H., "The Characteristics of Surface Roughness when Micro Blasting of Titanium Alloy with Spiral Movement", Journal of the Korean Society of Manufacturing Process Engineers., Vol. 11, No, 4, pp. 125-130, 2012.