한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제19권9호
  • /
  • Pages.59-70
  • /
  • 2020
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

홀과 노즐을 고려한 플랜트 기기 스펙-카탈로그 데이터 번역 시스템 개발

Development of a System that Translates Spec-catalog Data for Plant Equipment Considering Holes and Nozzles

  • 이현오 (경북대학교 정밀기계공학과) ;
  • 권혁준 (경북대학교 정밀기계공학과) ;
  • 이광 ((주)씨씨엘소프트) ;
  • 문두환 (경북대학교 정밀기계공학과)
  • Lee, Hyunoh (Department of Precision Mechanical Engineering, Kyungpook National University) ;
  • Kwon, Hyeokjun (Department of Precision Mechanical Engineering, Kyungpook National University) ;
  • Lee, Gwang (CCL SOFT) ;
  • Mun, Duhwan (Department of Precision Mechanical Engineering, Kyungpook National University)
  • 투고 : 2020.06.11
  • 심사 : 2020.07.05
  • 발행 : 2020.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Three-dimensional (3D) design data is used for various purposes throughout the life cycle of a plant construction project. Plant 3D CAD systems support 3D modeling based on specs-catalogs, which contain data that are used for different purposes such as design, procurement, production, and handover. Therefore, it is important to share the spec-catalog data in the 3D design model with other application systems. Sharing this data thus requires a system that extracts spec-catalog data from plant 3D CAD systems and converts them into neutral model data. In this paper, we analyze equipment spec-catalog data of plant 3D CAD systems and, based on these analyses, define the data structure for neutral spec-catalog data. We subsequently propose a procedure that translates native spec-catalog data to neutral model data and develop a prototype system that performs this operation. The proposed method is then experimentally validated for the test spec-catalog data.

키워드

참고문헌

  1. Gallaher, M. P., O'Connor, A. C., Dettbarn Jr, J. L., Gilday, L. T., "Cost analysis of inadequate interoperability in the US capital facilities industry", NIST Publication GCR 04-867, 2004.
  2. Owen, J., STEP: An Introduction, 2nd Edition, Information Geometers, 1997.
  3. Leal, D., "ISO 15926 Life Cycle Data for Process Plant: An Overview", Oil & Gas Science and Technology - Rev. IFP, Vol. 60, No. 4, pp. 629-637, 2005. https://doi.org/10.2516/ogst:2005045
  4. XMpLant, http://www.nextspace.co.nz/products-andservices/solutions/xmplant/
  5. ISO, Industrial automation systems and integration - Product data representation and exchange - Part 221: Application protocol: Functional data and their schematic representation for process plant, ISO/DIS 10303-221, 2005.
  6. ISO, Industrial automation systems and integration - Product data representation and exchange - Part 227: Application protocol: Plant spatial configuration, ISO 10303-227, 2005.
  7. ISO, Industrial automation systems and integration - Product data representation and exchange - Part 239: Application protocol: Product life cycle support, ISO 10303-239, 2005.
  8. Kim, B., Hans, T., Mun, D., Han, S., "Integration of distributed plant lifecycle data using ISO 15926 and Web services, Annals of nuclear energy", Vol. 38, No. 11, pp. 2309-2318, 2011. https://doi.org/10.1016/j.anucene.2011.07.033
  9. ISO, Industrial automation systems and integration - Integration of lifecycle data for process plants including oil and gas production facilities - Part 2: Data model, ISO 15926-2, 2003.
  10. ISO, Industrial automation systems and integration - Integration of lifecycle data for process plants including oil and gas production facilities - Part 3: Reference data for geometry and topology, ISO/TS 15926-3, 2009
  11. ISO, Industrial automation systems and integration - Integration of lifecycle data for process plants including oil and gas production facilities - Part 4: Initial reference data, ISO/TS 15926-4, 2007.
  12. ISO, Industrial automation systems and integration - Integration of lifecycle data for process plants including oil and gas production facilities - Part 7: Implementation methods for the integration of distributed systems - Template methodology, ISO/CD TS 15926-7, 2009.
  13. ISO, Industrial automation systems and integration - Integration of lifecycle data for process plants including oil and gas production facilities - Part 8: Implementation Methods for the Integration of Distributed Systems - OWL Implementation, ISO/CD TS 15926-8, 2009.
  14. Lee, H., Bae, Y., Kwon, S., Kim, B. C., Mun, D. and Han, S., “Development of a Neutral Model-based Catalog Generation System to Support 3D Design of a Plant,” TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, Vol. 42, No. 8, pp. 753-763, 2018. https://doi.org/10.3795/KSME-A.2018.42.8.753
  15. Lee, J. J., Han, Y. S., Lee, J. M. and Lee, K. H., "A Study on Equipment Model Converting Method and Implementation between Heterogenous Plant CAD Systems", Transactions of the Society of CAD/CAM Engineers, Vol. 23, No. 4, pp. 422-431, 2018.
  16. Yeo, C., Park, C. and Mun, D., “Development of a System to Convert a 3D Mesh Model in STL Format into OBJ Format,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 3, pp. 78-86, 2018. https://doi.org/10.14775/ksmpe.2018.17.3.078
  17. Bae, Y., Park, C., Mun, D. and Han, S., "Development of a System to Translate Catalog Data of Equipment and Materials form a Neutral Mode to a Plant 3D CAD System", Korean Journal of Computational Design and Engineering, Vol. 23, No. 2, pp. 144-154, 2018. https://doi.org/10.7315/CDE.2018.144
  18. Bae, Y., Lee, H., Lee, G., Mun, D. and Han, S., "Development of a system to translate fitting parts' spec-catalog data between plant 3D CAD systems and neutral model", TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, Vol. 43, No. 9, pp. 657-665, 2019. https://doi.org/10.3795/ksme-a.2019.43.9.657