참고문헌
- ACI Committee 318 (2011). Building Code Requirements for Structural Concrete, ACI 318M-11, American Concrete Institute
- Kim, S. Y., Yu, C. S., and Yoon, Y. S. (2004). Sleeve-type expansion anchor behavior in cracked and uncracked concrete. Nuclear Engineering and Design, 228(1-3), 273-281. https://doi.org/10.1016/j.nucengdes.2003.06.018
- Mahrenholtz, P., and Eligehausen, R. (2015). Post-installed concrete anchors in nuclear power plants: Performance and qualification. Nuclear Engineering and Design, 287, 48-56. https://doi.org/10.1016/j.nucengdes.2015.03.004
- Karmazinova, M., Melcher, J., and Kala, Z. (2009). Design of expansion anchors to concrete based on results of experimental verification. Advanced Steel Construction, 5(4), 390-405.
- Delhomme, F., Pallud, B., and Rouane, N. (2018). Tightening Torque Influence on Pullout Behavior of Post-installed Expansion Anchors. KSCE Journal of Civil Engineering, 22(10), 3931-3939. https://doi.org/10.1007/s12205-018-0930-9
- Kim, J. S., Jung, W. Y., Kwon, M. H., and Ju, B. S. (2013). Performance evaluation of the post-installed anchor for sign structure in South Korea. Construction and Building Materials, 44, 496-506. https://doi.org/10.1016/j.conbuildmat.2013.03.015
- Eriksson, D., and Gasch, T. (2011). Load capacity of anchorage to concrete at nuclear facilities, Doctoral dissertation, MSc Thesis: KTH Architecture and the Built Environment, Stockholm, Sweden.
- Tsavdaridis, K. D., Shaheen, M. A., Baniotopoulos, C., and Salem, E. (2016, February). Analytical approach of anchor rod stiffness and steel base plate calculation under tension. In Structures (Vol. 5, pp. 207-218). Elsevier. https://doi.org/10.1016/j.istruc.2015.11.001
- Gontarz, J., and Podgorski, J. (2019). Analysis of crack propagation in a "pull-out" test. Studia Geotechnica et Mechanica.
- Chen, Z., Nassiri, S., Lamanna, A., and Cofer, W. (2020). Investigation of Pull-Through and Pullout Failure Modes of Torque-Controlled Expansion Anchors. ACI Structural Journal, 117(1).
- ASTM E488/E488M-18 (2018). Standard Test Methods for Strength of Anchors in Concrete Elements
- Hilti (2019). Anchor Fastening Technical Guide Edition 19, https://www.hilti.com/medias/sys_master/documents/hd8/h29/9 484912361502/Technical-information-ASSET-DOC-LOC-1543421.pdf
- ABAQUS (2020). Abaqus Analysis user's Guide 6.20, Dassault Systems Simulia Cop., Providenve, RI, USA
- Eligehausen, R., Mallée, R., and Silva, J. F. (2006). Anchorage in concrete construction (Vol. 10). John Wiley & Sons.
- ACI Committee 355 (2007). Qualification of Post-Installed Mechanical Anchors in Concrete and Commentary, ACI 355.2-07, American Concrete Institute
- Lubliner, J., Oliver, J., Oller, S., and Onate, E. (1989). A plastic-damage model for concrete. Int. J. Solids and Structures.
- Kent DC, and Park R. (1971). Flexural members with confined concrete. J. Struct. Div. 1971; 97(7): 1969-1990. https://doi.org/10.1061/JSDEAG.0002957
- Hafezolghorani, M., Hejazi, F., Vaghei, R., Jaafar, M. S. B., and Karimzade, K. (2017). Simplified damage plasticity model for concrete. Structural Engineering International, 27(1), 68-78. https://doi.org/10.2749/101686616X1081
- Ormeno, M., Geddes, M., Larkin, T., and Chouw, N. (2015). Experimental study of slip-friction connectors for controlling the maximum seismic demand on a liquid storage tank. Engineering Structures, 103, 134-146. https://doi.org/10.1016/j.engstruct.2015.09.005
- Mohamed, K., Rashed, G., and Radakovic-Guzina, Z. (2020). Loading characteristics of mechanical rib bolts determined through testing and numerical modeling. International Journal of Mining Science and Technology.
피인용 문헌
- 슬리브 및 헤드 길이에 따른 후설치 앵커의 인발성능평가 vol.25, pp.2, 2021, https://doi.org/10.11112/jksmi.2021.25.2.8