Nuclear Engineering and Technology

  • 제52권11호
  • /
  • Pages.2471-2478
  • /
  • 2020
  • /
  • 1738-5733(pISSN)
  • /
  • 2234-358X(eISSN)
한국원자력학회 (Korean Nuclear Society)
권호 표지
DOI QR코드

DOI QR Code

A cavitation performance prediction method for pumps PART1-Proposal and feasibility

  • Yun, Long (National Research Center of Pumps, Jiangsu University) ;
  • Rongsheng, Zhu (National Research Center of Pumps, Jiangsu University) ;
  • Dezhong, Wang (School of Mechanical Engineering, Shanghai Jiaotong University)
  • 투고 : 2020.01.04
  • 심사 : 2020.04.07
  • 발행 : 2020.11.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Pumps are essential machinery in the various industries. With the development of high-speed and large-scale pumps, especially high energy density, high requirements have been imposed on the vibration and noise performance of pumps, and cavitation is an important source of vibration and noise excitation in pumps, so it is necessary to improve pumps cavitation performance. The modern pump optimization design method mainly adopts parameterization and artificial intelligence coupling optimization, which requires direct correlation between geometric parameters and pump performance. The existing cavitation performance calculation method is difficult to be integrated into multi-objective automatic coupling optimization. Therefore, a fast prediction method for pump cavitation performance is urgently needed. This paper proposes a novel cavitation prediction method based on impeller pressure isosurface at single-phase media. When the cavitation occurs, the area of pressure isosurface Siso increases linearly with the NPSHa decrease. This demonstrates that with the development of cavitation, the variation law of the head with the NPSHa and the variation law of the head with the area of pressure isosurface are consistent. Therefore, the area of pressure isosurface Siso can be used to predict cavitation performance. For a certain impeller blade, since the area ratio Rs is proportional to the area of pressure isosurface Siso, the cavitation performance can be predicted by the Rs. In this paper, a new cavitation performance prediction method is proposed, and the feasibility of this method is demonstrated in combination with experiments, which will greatly accelerate the pump hydraulic optimization design.

키워드

참고문헌

  1. J. Katz, Cavitation phenomena within regions of flow separation, J. Fluid Mech. 140 (140) (1984) 397-436. https://doi.org/10.1017/S0022112084000665
  2. K.R. Laberteaux, S.L. Ceccio, V.J. Mastrocola, J.L. Lowrance, High speed digital imaging of cavitating vortices, Exp. Fluid 24 (5) (1998) 489-498. https://doi.org/10.1007/s003480050198
  3. H. Liu, D. Liu, Y. Wang, H. DU, H. Xu, Numerical research status and prospects of cavitating flow in a pump, Fluid Mach. 9 (2011), 008.
  4. I. Bilus, A. Predin, Numerical and experimental approach to cavitation surge obstruction in water pump, Int. J. Numer. Methods Heat Fluid Flow 19 (7) (2013) 818-834, 17. https://doi.org/10.1108/09615530910984091
  5. H. Ding, F.C. Visser, Y. Jiang, M. Furmanczyk, Demonstration and validation of a 3D CFD simulation tool predicting pump performance and cavitation for industrial applications, J. Fluid Eng. 133 (1) (2011), 011101. https://doi.org/10.1115/1.4003196
  6. K. Fanyu, Z. Hongli, Z. Xufeng, W. Zhiqiang, Design on variable-pitch inducer based on numerical simulation for cavitation flow, J. . Drain.-Irrigat.Machinery.Eng. 1 (2010), 002.
  7. Z. Yang, F. Wang, Z. Liu, Z. Zhang, Prediction of cavitation performance of axial-flow pump based on CFD, J. . Drain.Irrigat.Machinery.Eng. 29 (1) (2011) 11-15.
  8. W. Yong, L.H. Lin, Y.S. Qi, T.M. Gao, W. Kai, Prediction research on cavitation performance for centrifugal pumps, in: IEEE International Conference on Intelligent Computing and Intelligent Systems, 2009, pp. 137-140.
  9. B. Pouffary, R. Fortes-Patella, J.L. Reboud, P.A. Lambert, Numerical simulation of 3D cavitating flows: analysis of cavitation head drop in turbomachinery, in: ASME Fluids Engineering Division Summer Meeting and Exhibition, Fifth International Symposium on Pumping Machinery, June 19-23, 2005, pp. 1431-1439.
  10. E. Vahid, A. Pooria, H. Kazem, An improved progressive preconditioning method for steady non-cavitating and sheet-cavitating flows, Int. J. Numer. Methods Fluid. 68 (2) (2011) 210-232. https://doi.org/10.1002/fld.2502
  11. O. Coutier-Delgosha, R. Fortes-Patella, J.L. Reboud, N. Hakimi, C. Hirsch, Stability of preconditioned NaviereStokes equations associated with a cavitation model, Comput. Fluid 34 (3) (2005) 319-349. https://doi.org/10.1016/j.compfluid.2004.05.007
  12. H.S. Gunter, S. Jurgen, Physical and numerical modeling of unsteady cavitation dynamics, in: ICMF-2001, International Conference on Multiphase Flow, 2001.
  13. R.F. Kunz, et al., A preconditioned NaviereStokes method for two-phase flows with application to cavitation prediction, Comput. Fluid 29 (8) (2000) 849-875. https://doi.org/10.1016/S0045-7930(99)00039-0
  14. C.L. Merkle, J. Feng, P.E.O. Buelow, Computational modeling of the dynamics of sheet cavitation, 1998.
  15. A.K. Singhal, M.M. Athavale, H. Li, Y. Jiang, Mathematical basis and validation of the full cavitation model, J. Fluid Eng. 124 (3) (2002) 617-624. https://doi.org/10.1115/1.1486223
  16. Y. Song, S. Cao, Cavitation model with non-condensable gas effect and its numerical simulation, J. . Drain.Irrigat.Machinery.Eng. 30 (1) (2012) 1-5.
  17. D. Li, Y. Qin, Z. Zuo, H. Wang, S. Liu, X. Wei, Numerical simulation on pump transient characteristic in a model pump turbine, J. Fluid Eng. 141 (11) (2019) 111101. https://doi.org/10.1115/1.4043496
  18. N. Zhang, X. Liu, B. Gao, X. Wang, B. Xia, Effects of modifying the blade trailing edge profile on unsteady pressure pulsations and flow structures in a centrifugal pump, Int. J. Heat Fluid Flow 75 (2019) 227-238. https://doi.org/10.1016/j.ijheatfluidflow.2019.01.009
  19. N. Zhang, X. Liu, B. Gao, B. Xia, DDES analysis of the unsteady wake flow and its evolution of a centrifugal pump, Renew. Energy 141 (2019) 570-582. https://doi.org/10.1016/j.renene.2019.04.023
  20. D. Zhang, L. Shi, W. Shi, R. Zhao, H. Wang, B.P.M.V. Esch, Numerical analysis of unsteady tip leakage vortex cavitation cloud and unstable suction-side-perpendicular cavitating vortices in an axial flow pump, Int. J. Multiphas. Flow 77 (2015) 244-259. https://doi.org/10.1016/j.ijmultiphaseflow.2015.09.006
  21. D. Zhang, L. Shi, R. Zhao, W. Shi, Q. Pan, B.P.M.B.V. Esch, Study on unsteady tip leakage vortex cavitation in an axial-flow pump using an improved filter-based model, J. Mech. Sci. Technol. 31 (2) (2017) 659-667. https://doi.org/10.1007/s12206-017-0118-0
  22. D. Zhang, W. Shi, B.P.M.V. Esch, L. Shi, M. Dubuisson, Numerical and experimental investigation of tip leakage vortex trajectory and dynamics in an axial flow pump, Comput. Fluid 112 (1) (2015) 61-71. https://doi.org/10.1016/j.compfluid.2015.01.010
  23. Z. Pan, S. Yuan, Fundamentals of Cavitation in Pumps, Jiangsu University Press, Zhenjiang, 2013 (In Chinese).
  24. C.E. Brennen, Hydrodynamics of Pumps, Cambridge University Press, 2011.
  25. I.S. Pearsall, Design of pump impellers for optimum cavitation performance, Proc. Inst. Mech. Eng. 187 (1973) 667-678. https://doi.org/10.1243/PIME_PROC_1973_187_060_02
  26. T. Rus, M. Dular, B. Sirok, M. Hocevar, I. Kern, An investigation of the relationship between acoustic emission, vibration, noise, and cavitation structures on a kaplan turbine, J. Fluid Eng. 129 (9) (2007) 1112. https://doi.org/10.1115/1.2754313
  27. J.-P. Franc, J.-M. Michel, Fundamentals of Cavitation, Springer science & Business media, 2006.

피인용 문헌

  1. Hydraulic Optimization of Two-Way Counter-rotating Axial Flow Pump Turbine vol.8, 2020, https://doi.org/10.3389/fenrg.2020.577232
  2. Research on hydrodynamics of high velocity regions in a water-jet pump based on experimental and numerical calculations at different cavitation conditions vol.33, pp.4, 2021, https://doi.org/10.1063/5.0040618