DOI QR코드

DOI QR Code

국내 고층 비내진 철근콘크리트 벽식 아파트의 지진취약도 평가

Seismic Fragility Assessment for Korean High-Rise Non-Seismic RC Shear Wall Apartment Buildings

  • 전성하 (인천대학교 산학협력단) ;
  • 신동현 (인천대학교 일반대학원 건축학과) ;
  • 박지훈 (인천대학교 도시건축학부)
  • Jeon, Seong-Ha (Industry-Academic Cooperation Foundation, Incheon National University) ;
  • Shin, Dong-Hyun (Department of Architecture, Incheon National University) ;
  • Park, Ji-Hun (Division of Architecture and Urban Design, Incheon National University)
  • 투고 : 2020.09.28
  • 심사 : 2020.10.14
  • 발행 : 2020.11.01

초록

Seismic fragility was assessed for non-seismic reinforced concrete shear walls in Korean high-rise apartment buildings in order to implement an earthquake damage prediction system. Seismic hazard was defined with an earthquake scenario, in which ground motion intensity was varied with respect to prescribed seismic center distances given an earthquake magnitude. Ground motion response spectra were computed using Korean ground motion attenuation equations to match accelerograms. Seismic fragility functions were developed using nonlinear static and dynamic analysis for comparison. Differences in seismic fragility between damage state criteria including inter-story drifts and the performance of individual structural members were investigated. The analyzed building had an exceptionally long period for the fundamental mode in the longitudinal direction and corresponding contribution of higher modes because of a prominently insufficient wall quantity in such direction. The results showed that nonlinear static analyses based on a single mode tend to underestimate structural damage. Moreover, detailed assessments of structural members are recommended for seismic fragility assessment of a relatively low performance level such as collapse prevention. On the other hand, inter-story drift is a more appropriate criterion for a relatively high performance level such as immediate occupancy.

키워드

참고문헌

  1. FEMA. Hazus-MH 2.1: Technical manual. Multi-hazard loss estimation methodology, earthquake model. c1999.
  2. European Union Commission. Guidelines for deriving seismic fragility functions of elements at risk: Buildings, lifelines, transportation networks and critical facilities. c2013.
  3. Architectural Institute of Korea. Korean Building Code 2005. c2005.
  4. FEMA, B. Prestandard and commentary for the seismic rehabilitation of buildings. Report FEMA-356. Washington, DC. c2000.
  5. Chun YS, Lee KH, Lee HW, Park YE, Song JK. Seismic Performance of Special Shear Wall Structural System with Effectively Reduced Reinforcement Detail. EESK J. Earthquake Eng. 2013 Jun;25(3):271-281.
  6. Jeong GH, Lee HS, Hwang KR, Kwon OS, Kim SJ. Seismic Fragility Analysis of High-Rise RC Box-Type Wall Building Structures. EESK J. Earthquake Eng. 2016 Mar;20(3):155-162.
  7. Jang DH, Song JK, Kang SL, Park CH. Fragility curve evaluation of reinforced concrete shear wall structures according to various nonlinear seismic analysis methods. EESK J. Earthquake Eng. 2011 Aug;15(4):1-12.
  8. Gogus A, Wallace JW. Seismic safety evaluation of reinforced concrete walls through FEMA P695 methodology. Journal of Structural Engineering. 2015 Oct;141(10):04015002. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001221
  9. Gogus A. Structural wall systems-nonlinear modeling and collapse assessment of shear walls and slab-column frames. University of California. c2010.
  10. Rafie Nazari Y. Seismic Fragility Analysis of Reinforced Concrete Shear Wall Buildings in Canada. Université d'Ottawa/University of Ottawa. c2017.
  11. Koera Institute of Civil Engineering and Building Technology. A Structural planning technique and design/construction manual for improving the structural efficiency of deteriorated apartment house. c2001.
  12. Ministry of Land. Infrastructure and Transport. Regulations on structural codes, etc. of buildings. c1982.
  13. Mander JB, Priestley MJ. Theoretical stress-strain model for confined concrete. Journal of Structural Engineering. 1988 Aug; 144(8):1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  14. Architectural Institute of Korea. Guidelines for Performance-Based Seismic Design of Residential Buildings, Korea Building Code Center. c2017.
  15. National Institute of Standards and Technology. Recommended modeling parameters andacceptance criteria for nonlinear analysis in support of seismic evaluation, retrofit, and design. NIST GCR 17-917-45, Gaithersburg, MD. c2017.
  16. Lowes LN, Lehman DE, Baker C. Recommendations for modeling the nonlinear response of slender reinforced concrete walls using PERFORM-3D. In 2016 SEAOC convention. Maui, USA. c2016.
  17. Pugh JS. Numerical simulation of walls and seismic design recommendations for walled buildings. PhD Thesis. c2013.
  18. Korea Infrastructure Safety Corporation. Guide lines for seismic performance evaluation for existing buildings. c2019.
  19. Korean Standards Association. KS D 3504: Steel Bars for Concrete Reinforcement. Korean Standards Association. c2016.
  20. Earthquake Engineering Society of Korea. A Study to promote seismic reinforcement in structural design practice. c2018.
  21. Korean Standards Association. KS D 3504: Steel Bars for Concrete Reinforcement. Korean Standards Association. c1988.
  22. KCI. A Study on the Application of High Strength Reinforcement to Concrete Structures. c2010.
  23. Thomsen IV JH, Wallace JW. Displacement-based design of slender reinforced concrete structural walls-experimental verification. Journal of structural engineering, 2004;130(4):618-630. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:4(618)
  24. Lee JM. A study on the characteristics of strong ground motions in southern Korea. KINS/HR-422, Korea Institute of Nuclear Safety. Daejeon, 77. c2002.
  25. Jo ND, Baag CE. Estimation of spectrum decay parameter k and stochastic prediction of strong ground motions in southeastern Korea. J. Earthq. Eng. Soc. Korea, 2003;7(6):59-70. https://doi.org/10.5000/EESK.2003.7.6.059
  26. Yun KH, Park DH, Choi WH, Chang CJ, Lee DS. Development of site-specific ground-motion attenuation relations for Nuclear Power Plant sites and study on their characteristics. 2005. In EESK Fall Workshop, p.23-24.
  27. PEER. Pacific Earthquake Engineering Research Center, University of California Berkeley. Available from: https://ngawest2.berkeley.edu.
  28. Baker JW, Lee C. An Improved Algorithm for Selecting Ground Motions to Match a Conditional Spectrum, Journal of Earthquake Engineering. 2018;22(4):708-723. https://doi.org/10.1080/13632469.2016.1264334
  29. Atkinson GM, Boore DM. Earthquake GroundMotion Prediction Equations for Eastern North America. Bull. Seismol. Soc. Am. 2006; 96(6):2181-2205. https://doi.org/10.1785/0120050245
  30. National Emergency Management Agency. Development of seismic fragility functions for Korean building structures. c2009.
  31. Applied Technology Council. Seismic Evaluation and Retrofit of Concrete Building, ATC-40, Redwood City, CA. c1996.
  32. Baker JW. Efficient analytical fragility function fitting using dynamic structural analysis. Earthquake Spectra. 2015;31(1):579-599. https://doi.org/10.1193/021113EQS025M
  33. American Society of Civil Engineers. Seismic Evaluation and Retrofit of Existing Buildings. ASCE/SEI 41-17. American Society of Civil Engineers. c2017.
  34. KDS 14 00 00. Design of Concrete Structures. Korea Construction Standards Center. c2019.
  35. Orakcal K, Wallace JW. Flexural modeling of reinforced concrete walls-experimental verification. ACI Materials Journal. 2006 Sep;103(2):196.
  36. Wood SL. Shear strength of low-rise reinforced concrete walls. ACI Struct. J. 1990;87(1):99-107.
  37. Wallace JW. Evaluation of UBC-94 provision for seismic design of RC structural walls. Earthq. Spec. 1996;12(2):327-348. https://doi.org/10.1193/1.1585883
  38. Tran TA, Motter CJ, Segura C, Wallace JW. strength and deformation capacity of shear wall. WCEE. c2017.
  39. National Institute of Standards and Technology. Evaluation of the FEMA P-695 Methodology for Quantification of Building Seismic Performance Factors. c2010.