Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Changes in Magnetic Properties When Manufacturing Cobalt-substituted Barium Ferrite Powder

Cobalt가 치환된 Barium Ferrite 분말 제조 시 자기적 특성변화

  • Um, Myeong-Heon (Division of Chemical Engineering, Kongju National University) ;
  • Yeon, Je-Uk (Division of Chemical Engineering, Kongju National University) ;
  • Lee, Cha-Jin (H&S Hightech Corporation) ;
  • Ha, Beom-Yong (Department of Renewable & Electrical Engineering, Yeungjin University)
  • 엄명헌 (공주대학교 화학공학부) ;
  • 연제욱 (공주대학교 화학공학부) ;
  • 이차진 (에이치엔에스하이텍) ;
  • 하범용 (영진전문대학교 신재생에너지전기계열)
  • Received : 2020.08.20
  • Accepted : 2020.10.05
  • Published : 2020.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

Single-phase barium ferrite powder was synthesized using the sol-gel method. At this time, an attempt was made to find the optimal experimental conditions for the production of single-phase barium ferrite by varying the Fe to Ba molar ratio (Fe/Ba) and the heat treatment temperature. In addition, cobalt-substituted barium ferrite particles were prepared using cobalt, which has an excellent effect on coercivity control for the production of ferrite fine particles having a coercivity of 2.5 to 5.5 kOe for use in high-density magnetic recording media. The changes in the magnetic properties of these were investigated. X-ray diffraction (XRD), thermogravimetric-differential thermal analysis (TG-DTA), and field emission scanning electron microscopy (FE-SEM) were used to observe the synthesis of single-phase, and Fourier transform infrared spectroscopy (FT-IR) and energy dispersive X-ray spectrometry (EDS) were used to analyze the chemical structure and composition. The coercivity of the cobalt-substituted barium ferrite powder was measured by vibrating sample magnetometry (VSM). As a result, single-phase Barium ferrites were synthesized when the Fe/Ba molar ratio was 10, and the heat treatment temperature was 900 ℃. The coercivity decreased with increasing the amount of Co added. Barium ferrite, having a coercivity of 2.5 to 5.5 kOe for use in high-density magnetic recording media, was synthesized when the Co to Fe(Co/Fe) molar ratio was less than 0.16.

본 연구에서는 Sol-Gel 방법을 이용하여 단일상의 Barium ferrite 분말을 제조하였으며, 이때 Ba에 대한 Fe(Fe/Ba)의 몰비와 열처리 온도를 달리하여 단일상의 Barium ferrite를 제조하기 위한 최적의 실험조건을 찾고자 하였다. 또한 고밀도 자기기록매체에 사용되기 위한 2.5 ~ 5.5 kOe 크기의 보자력을 가지는 ferrite 미립자 제조를 위해 보자력 제어에 뛰어난 효과를 지닌 cobalt를 첨가제로 하여 cobalt가 치환된 Barium ferrite 미립자를 제조하고 이들에 대한 자기적 특성 변화를 조사하였다. 제조된 Barium ferrite의 결정구조 및 단일상의 합성여부를 확인하기 위해 X-Ray Diffractometer(XRD), Thermogravimetric-Differential Thermal Analysis(TG-DTA), Field Emission Scanning Electron Microscope(FE-SEM)을 이용하여 분석하였으며, 화학적 구조와 조성의 분석을 위해 Fourier Transform Infrared Spectroscopy(FT-IR), Energy Dispersive X-Ray Spectrometer(EDS)를 사용하였다. 또한 Vibrating Sample Magnetometer(VSM)을 통해 cobalt가 치환된 Barium ferrite 분말의 보자력을 측정하였다. 그 결과 단일상의 Barium ferrite는 Fe/Ba의 몰비가 10, 900 ℃의 열처리 온도에서 가장 잘 합성되었다. Co의 첨가량이 증가할수록 보자력은 감소하였으며 Fe에 대한 Co(Co/Fe)의 몰비가 0.16 이내 일 때, 고밀도 자기기록매체에 사용할 수 있는 보자력 값인 2.5 ~ 5.5 kOe를 가지는 Barium ferrite가 합성되었다.

Keywords

References

  1. J. Ding, R. Street, and H. Nishio, "Magnetic properties of Ba- and Sr-hexaferrite prepared by mechanical alloying", J. Magn. Magn. Mater., Vol.164, No.3, pp.385-389, Dec. 1996. DOI: https://doi.org/10.1016/S0304-8853(96)00406-4
  2. J. Ding, T. Tsuzuki, and P. G. McCormick, "Ultrafine $BaFe_{12}O_9$ powder synthesised by mechanochemical processing", J. Magn. Magn. Mater., Vol.177-181, Part2, pp.931-932, Jan. 1998. DOI: https://doi.org/10.1016/S0304-8853(97)00858-5
  3. J. Ding, H. Yang, W. F. Miao, P. G. McCormick, and R. Street, "Hexaferdte magnetic materials prepared by mechanical alloying", J. Magn. Magn. Mater., Vol.150, No.3, pp.417-420, Nov. 1995, DOI: https://doi.org/10.1016/0304-8853(95)00279-0
  4. K. H. Shin, "Basic principles of magnetic information storage and the recording medium", CERAMIST, The Korean Ceramic Society, Vol.2, No.4, pp.24-34, Aug. 1999.
  5. X. Liu, J. Wang, L. M. Gan, S. C. Ng, and J. Ding, "An ultrafine barium ferrite powder of high coercivity from water-in-oil microemulsion", J. Magn. Magn. Mater., Vol.184, No.3, pp.344-354, May. 1998. DOI: https://doi.org/10.1016/S0304-8853(97)01141-4
  6. T. Fujiwara, "Barium ferrite media for perpendicular recording", IEEE Trans. Magn. Vol.21, No.5, pp.1480-1485, Sep. 1985. DOI: https://doi.org/10.1109/TMAG.1985.1064091
  7. V. B. Bregar, "Advantages of Ferromagnetic Nanoparticle Composites in Microwave Absorbers", IEEE Trans. Magn. Vol.40, No.3, pp.1679-1684, May. 2004. DOI: https://doi.org/10.1109/TMAG.2004.826622
  8. M. P. Sharrock, "Particulate Magnetic Recording Media: A Review", IEEE Trans. on Mag., Vol.25, No.6, pp.4374-4389, Nov. 1989. DOI: https://doi.org/10.1109/20.45317
  9. S. Iwasaki, "Perpendicular Magnetic Recording", IEEE Trans. on Mag., Vol.16, No.1, pp.71-76, Jan. 1980. DOI: https://doi.org/10.1109/TMAG.1980.1060546
  10. N. Sugita, M. Maekawa, Y. Ohta, K. Okinaka, and N. Nagai, "Advances in Fine Magnetic Particles for High Density Recording", IEEE Trans. on Mag., Vol. 31, No.6, pp.2854-2858, Nov. 1995. DOI: https://doi.org/10.1109/20.490174
  11. H. L. Glass, "Ferrite Film for Microwave and Millimeter-Wave Devices", Proceeding of The IEEE, Vol.76, No.2, pp.151-158, Feb. 1988. DOI: https://doi.org/10.1109/5.4391
  12. R. Gemperle, V. Kambersky, J. Simsova, L. Murtinova, L. Pust, P. Gornert, W. Schuppel and R. Gerber, "Domain Structure of Thin Single Crystal Platelets of $BaFe_{12-x-y}Co_xTi_yO_{19}$", J. Magn. Magn. Mater., Vol.118, No.3, pp.295-301, Jan. 1993. DOI: https://doi.org/10.1016/0304-8853(93)90429-6
  13. Z. Yang, H. X. Zeng, D. H. Han, J. Z. Liu and S. L. Geng, "Morphological, Structure and Magnetic Characteristics of Co-Ti and Co-Sn Substituted Ba-ferrite Particles for Magnetic Recording", J. Magn. Magn. Mater., Vol.115, No.1, pp.77-86, Sept. 1992. DOI: https://doi.org/10.1016/0304-8853(92)90185-Q
  14. M. Pernet, X. Obradors, M. Vallet, T. Hernandez and P. Germi, "Synthesis and characterization of new substituted barium-ferrite particles for magnetic recording", IEEE Trans. on Magn., Vol.24, No.2, pp.1898-1900, Mar. 1988. DOI: https://doi.org/10.1109/20.11639
  15. Yang Zheng, Liu Jian-zhong, Zheng Pei, Geng Sheng-li, Chen Zi-yu, "Preparation and magnetic properties of the Co and Ti substituted Ba-Ferrite platelet particles", IEEE Trans. on Mag., Vol.23, No.5, pp.3131-3133, Sept. 1987. DOI: https://doi.org/10.1109/TMAG.1987.1065388
  16. O. Kubo, T. Ido and H. Yokoyama, "Properties of Ba ferrite particles for perpendicular magnetic recording media", IEEE Trans. on Magn., Vol.18, No.6, pp.1122-1124, Nov. 1982. DOI: https://doi.org/10.1109/TMAG.1982.1062007
  17. S. Wang, J. Ding, Y. Shi, and Y. J. Chen, "High coercivity in mechanically alloyed $BaFe_{10}Al_2O_{19}$", J. Magn. Magn. Mater., Vol.219, No.2, pp.206-212, Sept. 2000. DOI: https://doi.org/10.1016/S0304-8853(00)00450-9
  18. J. Ding, W. F. Miao, P. G. McCormick, R. Street, "High-coercivity ferrite magnets prepared by mechanical alloying", J. Alloys Comp. Vol.281, No.1, pp.32-36, Nov. 1998. DOI: https://doi.org/10.1016/S0925-8388(98)00766-X
  19. G. Albanese, B. E. Watts, F. Leccabue, and S. D. Castanon, "Mossbauer and magnetic studies of $PbFe_{12−x}Cr_xO_{19}$ hexagonal ferrites", J. Magn. Magn. Mater., VOl.184, No.3, pp.337-343, May. 1998. DOI: https://doi.org/10.1016/S0304-8853(97)01162-1
  20. Z. B. Guo, W. P. Ding, W. Zhong, J. R. Zhang, Y. W. Du, "Preparation and magnetic properties of $SrFe_{12}O_{19}$ particles prepared by the salt-melt method", J. Magn. Magn. Mater., Vol.175, No.3, pp.333-336, Nov. 1997. DOI: https://doi.org/10.1016/S0304-8853(97)00206-0
  21. C. S. Kim, S. W. Lee, and S. Y. An, "Mossbauer studies of $BaFe_{11.9}Mn_{0.1}O_{19}$ by a sol-gel method", J. Appl. Phys., Vol.87, No.9, pp.6244, Apr. 2000. DOI: https://doi.org/10.1063/1.372668
  22. C. S. Kim, S. Y. An, J. H. Son, J. G. Lee, and H. N. Oak, "Magnetic properties of $Cr^{3+}$ substituted $BaFe_{12}O_{19}$ powders grown by a sol-gel method", IEEE Trans. on Mag. Vol.35, No.5, pp.3160-3162, 1999. DOI: https://doi.org/10.1109/20.801114
  23. M. A. G. C. Van de Graaf, J. H. H. Termaat, and A. J. Burggraaf, "Microstructure and sintering kinetics of highly reactive $ZrO_2-Y_2O_3$ ceramics", J. Mater. Sci., Vol.20, pp.1407-1418, Apr. 1985. DOI: https://doi.org/10.1007/BF01026338
  24. S. J. Lee, S. B. Choe, H. S. Gwak, and S. U. Paik, "Synthesis and Physical Properties of $MO;Fe_{12}O_{18}$(M/Ba and Sr) Nanoparticles Prepared by Sol-Gel Method Using Propylene Oxide", J. Korean Ind. Eng. Chem., Vol.17, No.4, pp.420-425, Aug. 2006.
  25. H. S. Choi, H. Y. Park, S. Y. Yoon, H. G. Shin, and T. K. Kim. "Magnetic Properties of Co- substituted Ba-ferrite Powder by Sol-gel Method" CERAMIST, The Korean Ceramic Society, Vol.39, No.8, pp.789-794, Aug. 2002.