대한건축학회논문집 (Journal of the Architectural Institute of Korea)

  • 제36권10호
  • /
  • Pages.127-132
  • /
  • 2020
  • /
  • 2733-6239(pISSN)
  • /
  • 2733-6247(eISSN)
대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

바닥 복사난방시스템에서 PCM 위치에 따른 온도변화 Mock-up 실험

Mock-up Experiment on Temperature Variation according to PCM Position in Radiant Floor Heating System

  • 투고 : 2020.09.18
  • 심사 : 2020.10.12
  • 발행 : 2020.10.30
⟨ 이전 논문 다음 논문 ⟩

초록

This study in which a phase change material (PCM) was applied to a general floor heating system, and the temperature change according to the insertion location was confirmed. Most apartment houses in Korea use a floor heating system using hot water. Since such a floor structure has difficulty in securing sufficient heat capacity due to structural constraints, it is necessary to develop a new floor heating system with improved heat storage performance. Accordingly, the PCM insertion location and heating schedule were introduced and tested in the PCM-applied floor heating system with improved heat storage performance. As a result of the experiment, when the heating was stopped for 30 minutes and 3 hours by inserting the PCM into the side, the indoor and surface temperature of Room 2, a floor heating system to which PCM was applied, was 1.6℃ and 1.5℃ lower than that of Room 1, a general floor heating system. At the time of 1 hour operation and 3 hour shutdown, the indoor and surface temperature of Room 2 was 1.0℃ and 0.9℃ lower than that of Room 1. When the PCM was inserted in the lower part and operated for 30 minutes, the surface and room temperature of Room 2 was 2.4℃ and 1.0℃ higher than that of Room 1, and 2.4℃ and 1.0℃ higher when operated for 1 hour. According to the experimental results, it was confirmed that in the floor heating system to which the PCM was applied, the surface and room temperatures were higher when the PCM was inserted in the lower part than in the side of the hot water pipe.

키워드

과제정보

이 논문은 2020년 대한민국 교육부와 한국연구재단의 이공분야 기초연구사업의 지원을 받아 수행된 연구임 과제번호 : NRF-2016R1D1A1B01015616

참고문헌

  1. Ahn, B. C. (2018). The Effects of Hot Water Supply Temperature on Indoor Thermal Characteristics for Floor Radiant Heating System, 14(4), pp. 13-19. https://doi.org/10.17664/KSGEE.2018.14.4.0013
  2. Li, Ling. (2016). Analysis on the Operation Characteristics and Heating Energy Consumption of Individual Boiler According to Heating Capacity of Radiant Floor Heating System, Master's thesis in Korea, Seoul National University Graduate School.
  3. Kim, S. E., Choi, S. H., & Park, J. C. (2020). Analysis of Thermal Storage Effects of PCM Floor Radiant Heating System According to Heating Schedule. Korean Journal of Air-Conditioning and Refrigeration Engineering, 32(6), pp. 272-277. https://doi.org/10.6110/KJACR.2020.32.6.272
  4. Im. J. H. (2016). Characteristics of Indoor Thermal Environment in Thermally Activated Building System (TABS) using Phase Change Materials (PCMs) during Heating Operation, pp. 159-164.
  5. Song, G. S. (2005). Buttock responses to contact with finishing materials over the ONDOL floor heating system in Korea, Energy and Buildings, 37(1), pp. 65-75. https://doi.org/10.1016/j.enbuild.2004.05.005
  6. Baek. S. H. (2018). Analysis of heat storage and energy performance of PCM floor radiant heating systems, Doctoral thesis in Korea, Chung-Ang University Graduate School.
  7. Kim. T. W. (2019). A Mock-up Test of Thermal Storage Performance for PCM Radiant Floor Heating System, Master's Thesis in Korea, Chung-Ang University Graduate School.