DOI QR코드

DOI QR Code

A Convergent Study on Impact Analysis due to Existence or Non-Existence of Smart-phone Case

스마트폰 케이스의 유무에 따른 충격해석에 관한 융합 연구

  • Choi, Kye-Kwang (Department of Metal Mold Design Engineering, Kongju national University) ;
  • Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju National University)
  • 최계광 (공주대학교 금형설계공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Received : 2020.07.06
  • Accepted : 2020.10.20
  • Published : 2020.10.28

Abstract

In this study, the deformation and stress on each model was analyzed and the strength was compared with each other when the impacts on a total of four smart phone models was given. Models B and D with cases can be seen to have less deformation and stress than models A and C without cases. The models including the case have higher masses than the models without the case. So, the deformation and stress can be reduced by absorbing the impact force. In addition, the masses of models C and D are smaller than models A and B, but the stresses and deformations are seen to be smaller. If a case specialized for edge protection is chosen and designed when manufacturing a smart-phone in order to absorb the shock while weighing less, it is thought to improve the strength of the smart-phone and increase the durability. And it is seen that this study is adequate at the efficient design with durability of smart phone case practically and the aesthetic convergence of smart phone.

본 연구에서는 총 4가지 Model의 스마트폰들에 대하여 충격을 주었을 때, 각각의 모델들에 대한 변형량과 응력들을 해석하여 그 강도를 서로 비교하였다. 케이스를 장착한 경우의 모델들인 Model B와 Model D는 장착하지 않은 모델들인 Model A와 Model C에 비하여 변형량과 응력이 적은 것을 볼 수 있다. 케이스를 포함한 Model들이 케이스가 없는 Model들보다 질량이 더 많아지게 되어 충격력을 흡수함으로서 변형량과 응력을 감소시킬 수 있다. 또한 질량이 Model C와 Model D가 Model A와 Model B에 비하여 작지만 응력과 변형량이 더 작아짐을 보이고 있다. 스마트폰을 제작시에 무게가 적게 나가면서 충격을 흡수할 수 있도록 하기 위하여 모서리 보호에 특화되어 있는 케이스를 선택하여 설계한다면 스마트폰의 강도를 향상시켜 내구성을 증진할 수 있다고 사료된다. 또한 본 연구가 실제적으로 스마트폰 케이스의 내구성이 있는 효율적인 설계와 스마트 폰의 미적인 융합에 적합하여 보인다.

Keywords

References

  1. B. Y. Kang, Y. H. Kim, D. W. Kim, M. H. Kim, J. Y. Han & C. H. Hong. (2011). A Study of the FE Analysis Technique of Hybrid Blades for Large Scale Wind-Turbine. Journal of Ocean Engineering and Technology, 25(1), 61-66. DOI : 10.5574/KSOE.2011.25.1.061
  2. K. S. Moon, K. S. Jung, J. H. Sang & J. P. Gyung. (2007). Structural analysis and optimization of a low-speed vehicle body. Journal of Automobile Engineering, 221(3), 313-326. DOI : 10.1243/09544070JAUTO36
  3. J. H. Yoo, J. H. Choi, I. Lee, J. H. Han, S. M. Jeon & J. H. Kim. (2004). Transient Heat Transfer and Structural Analyses for the Turbopump Turbine of a Liquid Rocket Engine. Journal of the Korean Society for Aeronautical & Space Sciences, 32(3), 58-65. DOI : 10.5139/JKSAS.2004.32.3.058
  4. Y. Y. Her & Y. J. Yang. (2017). Structural Analysis on Development of Roller Jig for Peeling Machine. Journal of the Korean Society of Mechanical Technology, 19(2), 242-248. DOI : 10.17958/ksmt.19.2.201704.242
  5. J. M. Cha, S. J. Byun, Z. H. Wang & Y. C. Kwon. (2017). Study on Structural and Fatigue Analysis according to Shape change of Automatic Press. Journal of the Korean Society of Mechanical Technology, 19(2), 156-161. DOI : 10.17958/ksmt.19.2.201704.156
  6. S. J. Cho, J. W. Han, Y. J. Park & G. H. Lee. (2014). Structural analysis of a planetary gear carrier in the slewing reducer for tower crane. Journal of the Korean Society of Manufacturing Process Engineers, 13(5), 1-7. DOI : 10.14775/ksmpe.2014.13.5.001
  7. S. W. Choo & S. H. Jeong. (2017). Structural and Dynamic Characteristic Analysis of a Feeder for an Automatic Assembly System of an LED Convergent Lighting Module. Journal of the Korean Society of Manufacturing Process Engineers, 16(1), 124-133. DOI : 10.14775/ksmpe.2016.16.1.124
  8. D. H. Lee & J. U. Cho. (2018). Convergence Study on Damage of the Bonded Part at TDCB Structure with the Laminate Angle Manufactured with CFRP. Journal of the Korea Convergence Society, 9(12), 175-180. DOI : 10.15207/JKCS.2018.9.12.175
  9. J. H. Lee & J. U. Cho. (2015). Study on the Convergent Life Evaluation due to the Bumper Configuration of Multipurpose Vehicle. Journal of the Korea Convergence Society, 6(5), 85-90. DOI : 10.15207/JKCS.2015.6.5.085
  10. J. U. Cho. (2014). Analytical Study on Durability due to the Load of Artificial Knee Joint. Journal of the Korea Convergence Society, 5(2), 7-11. DOI : 10.15207/JKCS.2014.5.2.007
  11. J. W. Park & J. U. Cho. (2017). Convergence Study on Composite Material of Unidirectional CFRP and SM 45C Sandwich Type that Differs in Stacking Angle. Journal of the Korea Convergence Society, 8(7), 231-236. DOI : 10.15207/JKCS.2017.8.7.231
  12. J. U. Cho. (2015). Study on Convergence Technique through Strength Analysis of Stabilizer Link by Type. Journal of the Korea Convergence Society, 6(1), 57-63. DOI : 10.15207/JKCS.2015.6.1.057
  13. J. W. Park. (2017). Structural Analysis of a Tractor Cabin Considering Structure Production Error. Journal of the Korea Convergence Society, 8(5), 155-160. DOI : 10.15207/JKCS.2017.8.5.155
  14. J. L. Cui, M. H. Chey & S. I. Kim. (2016). Seismic Performance of Urban Structures with Various Horizontal Irregularities using Equivalent Static Analysis. Journal of Convergence for Information Technology, 6(1), 25-32.
  15. W. B. Lee, S. H. Ryu, W. Y. Hao & B. P. Kyung. (2015). Dismantling Simulation of Nuclear Reactor Using Partial Mesh Cutting Method for 3D Model. Journal of Digital Convergence, 13(4), 303-310. https://doi.org/10.14400/JDC.2015.13.4.303