Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Vibration response of FG-CNT-reinforced plates covered by magnetic layer utilizing numerical solution

  • Cao, Yan (School of Mechatronic Engineering, Xi'an Technological University) ;
  • Musharavati, Farayi (Department of Mechanical and Industrial Engineering, College of Engineering, Qatar University) ;
  • Baharom, Shahrizan (Department of Civil Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia) ;
  • Talebizadehsardari, Pouyan (Metamaterials for Mechanical, Biomechanical and Multiphysical Applications Research Group, Ton Duc Thang University) ;
  • Sebaey, Tamer A. (Engineering Management Department, College of Engineering, Prince Sultan University) ;
  • Eyvazian, Arameh (Institute of Research and Development, Duy Tan University) ;
  • Zain, Azlan Mohd (UTM Big Data Centre, Universiti Teknologi Malaysia)
  • Received : 2020.04.15
  • Accepted : 2020.10.05
  • Published : 2020.10.25
⟨ Previous Next ⟩

Abstract

Vibration response in a sandwich plate with a nanocompiste core covered by magnetic layer is presented. The core is armed by functionalyy graded-carbon nanotubes (FG-CNTs) where the Mori-Tanaka law is utilized assuming agglomeration effects. The structure plate is located on elastic medium simulated by Pasternak model. The governing equations are derived based on Mindlin theory and Hamilton's principle. Utilizing diffrential quadrature method (DQM), the frequency of the structure is calculated and the effects of magnetic layer, volume percent and agglomeration of CNTs, elastic medium and geometrical parameters of structure are shown on the frequency of system. Results indicate that with considering magnetic layer, the frequency of structure is increased.

Keywords

References

  1. Akgoz, B. (2019), "Static stability analysis of axially functionally graded tapered micro columns with different boundary conditions", Steel Compos. Struct. 33, 965-974. https://doi.org/10.12989/scs.2019.33.1.965.
  2. Chahar, R.S. and Kumar, R.B. (2019), "Effectiveness of magnetic fiber armed composite laminate in active damping for smart structures", Steel. Compos. Struct., 31, 555-564, https://doi.org/10.12989/scs.2019.31.4.387.
  3. Chen, X.L., Liu, G.R. and Lim, S.P. (2003), "An element free Galerkin method for the free vibration analysis of composite laminates of complicated shape", Compos. Struct., 59(2), 279-289, https://doi.org/10.1016/S0263-8223(02)00034-X.
  4. Chow, S.T., Liew, K.M. and Lam, K.Y. (1992), "Transverse vibration of symmetrically laminated rectangular composite plates", Compos. Struct., 20, 213-226, https://doi.org/10.1016/0263-8223(92)90027-A.
  5. Civalek, O., Dastjerdi, Sh. and Akgoz, B. (2020), "Buckling and free vibrations of CNT-reinforced cross-ply laminated composite plates", Mech. Based Des. Struct. Mach., https://doi.org/10.1080/15397734.2020.1766494.
  6. Farrokhian, A. (2020), "Buckling response of smart plates reinforced by nanoparticles utilizing analytical method", Steel Compos. Struct., 35(1), 1-12. https://doi.org/10.12989/scs.2020.35.1.001.
  7. Keshtegar, B., Farrokhian, A., Kolahchi, R. and Trung, N.T. (2020a), "Dynamic stability response of truncated nanocomposite conical shell with magnetostrictive face sheets utilizing higher order theory of sandwich panels", Europ. J. Mech. - A Solids, 82, 104010. https://doi.org/10.1016/j.euromechsol.2020.104010.
  8. Keshtegar, B., Motezaker, M., Kolahchi, R. and Trung, N.T. (2020b), "Wave propagation and vibration responses in porous smart nanocomposite sandwich beam resting on Kerr foundation considering structural damping", Thin Wall. Struct., 154, 106820. https://doi.org/10.1016/j.tws.2020.106820.
  9. Kolahchi, R., Hosseini, H. and Esmailpour, M. (2016), "Differential cubature and quadrature-Bolotin methods for dynamic stability of embedded magnetic nanoplates based on visco-nonlocal-peizoelasticity theories", Compos. Struct.,157, 174-186, 10.1016/j.compstruct.2016.08.032.
  10. Kolahchi, R., Zhu, Sh.P., Keshtegar, B. and Trung, N.T. (2020), "Dynamic buckling optimization of laminated aircraft conical shells with hybrid nanocomposite martial", Aerosp. Sci. Technol., 98, 105656. https://doi.org/10.1016/j.ast.2019.105656.
  11. Medani, M., Benahmed, A., Zidour, M., Heireche, H., Tounsi, A., Anis Bousahla, A., Tounsi, A. and Mahmoud, S.R. (2019), "Static and dynamic behavior of (FG-CNT) armed porous sandwich plate using energy principle", Steel Compos. Struct., 32, 595-610. https://doi.org/10.12989/scs.2019.32.5.595.
  12. Mori, T. and Tanaka, K. (1973), "Average stress in matrix and average elastic energy of materials with misfitting inclusions", Acta Metall. Mater.,21, 571-574, https://doi.org/10.1016/0001-6160(73)90064-3.
  13. Pourasghar, A., Yas, M.H. and Karimian, S. (2013), "Local aggregation effect of CNT on the vibrational behavior of four-parameter continuous grading nanotube-reinforced cylindrical panels", Polym. Compos., 34 (5), 707-721. https://doi.org/10.1002/pc.22474.
  14. Pourasghar, A. and Karimian, S. (2013), "Dynamic stability analysis of functionally graded nanocomposite non-uniform column reinforced by carbon nanotube", J. Vib. Cont., 21 (13), 2499-2508. https://doi.org/10.1177/1077546313513625.
  15. Pourasghar, A. and Chen, Z. (2016), "Thermoelastic response of CNT reinforced cylindrical panel resting on elastic foundation using theory of elasticity", Compos. Part B: Eng., 99, 436-444. https://doi.org/10.1016/j.compositesb.2016.06.028.
  16. Pourasghar, A. and Chen, Z. (2019a), "Nonlinear vibration and modal analysis of FG nanocomposite sandwich beams reinforced by aggregated CNTs", Polym. Eng. Sci., 59(7), 1362-1370. https://doi.org/10.1002/pen.25119.
  17. Pourasghar, A. and Chen, Z. (2019b), "Dual-phase-lag heat conduction in FG carbon nanotube reinforced polymer composites", Physica B, 564, 147-156. https://doi.org/10.1016/j.physb.2019.03.038.
  18. Pourasghar, A. and Chen, Z. (2019c), "Hyperbolic heat conduction and thermoelastic solution of functionally graded CNT reinforced cylindrical panel subjected to heat pulse", Int. J. Solids Struct., 163, 117-129. https://doi.org/10.1016/j.ijsolstr.2018.12.030.
  19. Pourasghar, A. and Chen, Z. (2019d), "Effect of hyperbolic heat conduction on the linear and nonlinear vibration of CNT reinforced size-dependent functionally graded microbeams", Int. J. Eng. Sci., 137, 57-72. https://doi.org/10.1016/j.ijengsci.2019.02.002.
  20. Reddy, J.N. (2002), "Mechanics of laminated composite plates and shells: theory and analysis", second edition, CRC Press.
  21. Remil, A., Benrahou, K.H., Draiche, K., Bousahla, A.A. and Tounsi, A. (2019), "A simple HSDT for bending, buckling and dynamic behavior of laminated composite plates", Struct. Eng. Mech., 70, 325-337. https://doi.org/10.12989/sem.2019.70.3.325.
  22. Secgin, A. and Sarigul, A.S. (2008), "Free vibration analysis of symmetrically laminated thin composite plates by using discrete singular convolution (DSC) approach: algorithm and verification", J. Sound Vib., 315, 197-211, https://doi.org/10.1016/j.jsv.2008.01.061.
  23. Shi, D.L. and Feng X.Q. (2004), "The Effect of nanotube waviness and agglomeration on the elastic property of carbon nanotube-armedcomposites", J. Eng. Mater-T. ASME, 126, 250-270, https://doi.org/10.1115/1.1751182.
  24. Solmaz, M.Y. and Topkaya, T. (2013), "Progressive failure analysis in adhesively, riveted, and hybrid bonded double-lap joints", The J. Adhesion, 89(11), 822-836. https://doi.org/10.1080/00218464.2013.765800.
  25. Topkaya, T. and Solmaz, M.Y. (2018), "Investigation of low velocity impact behaviors of honeycomb sandwich composites", J. Mech. Sci. Tech., 32(7), 3161-3167. https://doi.org/10.1007/s12206-018-0619-5.