DOI QR코드

DOI QR Code

A Study on the Properties of Traditional Korean Roof Tile by Using Nano Alumino Silicate

전통한식기와의 나노알루미노실리케이트 첨가에 따른 성능연구

  • Kim, Soon-Ho (Industry-University Cooperation Foundation, Changwon University)
  • Received : 2020.05.11
  • Accepted : 2020.10.07
  • Published : 2020.10.20

Abstract

The appearance of Korean traditional roof tiles is beautiful and excellent in water resistance, fire resistance and durability, but a high sintering temperature of 1,200℃ or higher is required. Therefore, due to the economical and heavy weight problem, the current trend is to use different roof finishing materials than Korean traditional roof tiles. By adding nanoaluminosilicate to clay and kaolin, which are the materials of the clay roof tiles, the sintering temperature is sintered at a low temperature of 1,000℃ or less, and the optimal mixing and material process is designed to satisfy the characteristics required as a Korean traditional roof tile. The results of this study again demonstrate the superiority of Korean traditional tiles with roof finishing materials using nanoaluminate. The properties of Korean traditional roof tiles that satisfy the criteria of KS F 3510 by applying fire resistance of natural minerals and nanoparticle technology to flexural strength of 2800N, Bulk specific gravity of 2.0g/㎤ and absorption rate of less than 10.0%, through which and researched materials development.

전통한식 점토기와는 외관이 미려하고, 내수성 및 내화성, 내구성이 우수하나 높은 소성온도를 요구하여 경제성과 중량문제 등으로 인하여 전통양식의 기와를 사용하기 보다 기존의 공법을 사용하고 있는 것이 현 추세이다. 이에 본 연구에서는 우리나라의 산청에서 생산되는 고령토와 점토의 기와 소재에 나노알루미나실리케이트를 첨가하여 1,000℃ 이하의 저온소성하면서 전통한식 점토기와로서의 요구되는 물성을 만족하는 최적배합과 재료의 공정을 설계하고 이를 통해 나노코팅 전통한식 점토기와 소재개발에 관한 특성은 연구하고자 한다.

Keywords

References

  1. Kim EH, Yeo HJ, Lee YK. A study on reasonable policy direction for strengthening building safety. Institute of Architectural Urban Space. 2016 Oct;23:216-22.
  2. Song KL, Choi JL, Song JK, Cheon DY, Lee BY. Properties of eco-friendly korean traditional rooftile based on alkali-activated blast Furnace Slag. Journal of the Archi tectural Institute of Korea. 2013 Aug;15(4):77-83.
  3. Kim SH. On study of the energy analysis with mock-up house to hip green home. Proceeding of the Korean Institute of Architectural Sustainable Environment and Building Systems; 2011 Mar 25 : Seongnam, Korea. Seoul (Korea): Korean Institute of Architectural Sustainable Environment and Building Systems; 2011. p. 279-89.
  4. Bang HC, Koo CW, Yeon HJ, Hong TH, Hyun CT, Koo KJ. Life-cycle performance model for selecting a exterior cladding in the design phase. Journal of the Architectural Institute of Korea. 2007 Feb;23(2):75-8.
  5. Kim SH, Choi JM. A study on the characteristics of low temperature sintering ceramic siding using natural minerals. Journal of the Architectural Institute of Korea. 2019 Dec;35(12):149-56. https://doi.org/10.5659/JAIK_SC.2019.35.12.149
  6. Kim SH. The study on development of porous lightweight construction materials with the hwangto [dissertation]. [Jinju (Korea)]: Kyeongsang National University; 2004. 163 p.
  7. Kim SH, Kim HY. A study on the physical properties of MgO board for wall system. Journal of the Korea Institute of Ecological Architecture and Environment. 2007 Aug;7(4):135-40.
  8. Lee HS, Kim SH, Choi JM. A study on the natural cooling effect by ventilation control mode of window at school classroom. Journal of the Korean Solar Society of Korea. 2018 Aug;38(4):67-76. https://doi.org/10.7836/kses.2018.38.4.067
  9. Kim SH, Hong SW, Lee DW, Kim SW, Shin CH, Kim KT. On study of the energy analysis with mock-up house to HIP green home. Proceeding of the Regional Association of Architectural Institute of Korea; 2010 Dec 10; Korea. Daegu (Korea): the Regional Association of Architectural Institute; 2010. p. 575-8.
  10. Kim SH, Sung JK, Lee HR. A study for prevent condensation at corner copulas in outer wall of apartment building. Proceeding of the Regional Association of Architectural Institute of Korea; 2008 Dec 10; Korea. Daegu (Korea): the Regional Association of Architectural Institute; 2010. p. 507-10.