DOI QR코드

DOI QR Code

V/f 스칼라 제어 영구자석 동기 전동기의 안정적 초기 구동 기법

A Stable Startup Method of V/f Scalar Controlled Permanent Magnet Synchronous Motors

  • Kim, Hyeon-Seong (Dept. of Mechatronics Engineering, Incheon Nat'l University) ;
  • Lee, Sang-Min (Dept. of Mechatronics Engineering, Incheon Nat'l University) ;
  • Lee, Kibok (Dept. of Mechatronics Engineering, Incheon Nat'l University)
  • 투고 : 2020.07.17
  • 심사 : 2020.08.21
  • 발행 : 2020.10.20

초록

This study presents a stable start-up strategy for v/f scalar-controlled permanent magnet synchronous motors (PMSMs). The v/f-controlled PMSMs easily lose synchronism under low-speed conditions if an insufficient stator voltage is applied to the machine due to errors in measured motor parameters and inverter nonlinearity, such as inverter dead time and on-state voltage drop. The proposed method adopts the I/f control method to ensure a stable start at low speeds and then switches to the v/f control method at medium speeds. A smooth transition method from I/f control to v/f control is proposed to minimize the oscillation of the stator current and rotor speed during transition. Moreover, the stability of the I/f and v/f control methods is analyzed using a small-signal model. Simulation and experimental results are provided to verify the performance of the proposed control strategy.

키워드

참고문헌

  1. P. D. C. Perera, F. Blaabjerg, J. K. Pedersen, and P. Thogersen, "A sensorless stable V/f control method for permanent-magnet synchronous motor drives," Industry Applications IEEE Transactions, Vol. 39, No. 3, pp. 783-791, May/Jun. 2003. https://doi.org/10.1109/TIA.2003.810624
  2. J. I. Itoh, N. Nomura, and H. Ohsawa, "A comparison between V/f control and position-sensorless vector control for the permanent magnet synchronous motor," in Power Conversion Conference, Vol. 3, pp. 1310-1315, Apr. 2002.
  3. Y. Matsuki and S. Doki, "High stability V/f control of PMSM using state feedback control based on n-t coordinate system," in 2018 International Power Electronics Conference (IPEC-Niigata 2018 ECCE Asia), pp. 2224-2228, May 2018.
  4. Z. Tang, X. Li, S. Dusmez, and B. Akin, "A new V/f-based sensorless MTPA control for IPMSM drives," IEEE Transactions on Power Electronics, Vol. 31, No. 6, pp. 4400-4415, Aug. 2016. https://doi.org/10.1109/TPEL.2015.2470177
  5. W. J. Kim and S. H. Kim, "A MTPA control method for sensorless V/f operation of SPMSMs," The Transactions of the Korean Institute of Power Electronics, pp. 240-246, Aug. 2018.
  6. R. Ancuti, I. Boldea, and G. D. Andreescu, "Sensorless V/f control of high-speed surface permanent magnet synchronous motor drives with two novel stabilizing loops for fast dynamics and robustness," IET Electric Power Applications, Vol. 4, No. 3, pp. 149-157, Feb. 2010. https://doi.org/10.1049/iet-epa.2009.0077
  7. L. Xu and C. Wang, "Implementation and experimental investigation of sensorless control schemes for PMSM in super-high variable speed operation," in Industry Applications Conference 1998, Thirty-Third IAS Annual Meeting, Vol. 1, pp. 483-489, Oct. 1998.
  8. T. Halkosaari, "Optimal U/f-control of high speed permanent magnet motors," in Industrial Electronics 2006 IEEE International Symposium, Vol. 3, pp. 2303-2308, Jul. 2006.
  9. M. Donolo, P. Donolo, S. Patel, and V. Yedidi, "Performance of synchronous motors loss-of-synchronism protection," in Petroleum and Chemical Industry Technical Conference (PCIC), pp. 71-78, Sep. 2017.
  10. G. D. Andreescu, C. E. Coman, A. Moldovan, and I. Boldea, "Stable V/f control system with unity power factor for PMSM drives," in Optimization of Electrical and Electronic Equipment (OPTIM) 2012 13th International Conference, pp. 432-438, May 2012.
  11. S. C. Agarlita, C. E. Coman, G. D. Andreescu, and I. Boldea, "Stable V/f control system with controlled power factor angle for permanent magnet synchronous motor drives," Electric Power Applications IET, Vol. 7, No. 4, pp. 278-286, Jul. 2013. https://doi.org/10.1049/iet-epa.2012.0392
  12. S. M. Sue, T. W. Hung, J. H. Liaw, Y. F. Li, and C. Y. Sun, "A new MTPA control strategy for sensorless V/f controlled PMSM drives," in 6th IEEE Conference on Industrial Electronics and Applications, pp. 1840-1844, Jun. 2011.
  13. M. Fatu, R. Teodorescu, I. Boldea, G. D. Andreescu, and F. Blaabjerg, "I-F starting method with smooth transition to EMF based motion-sensorless vector control of PM synchronous motor/generator," in Power Electronics Specialists Conference (PESC), pp. 1481-1487, Jun. 2008.
  14. Z. Wang, K. Lu, and F. Blaabjerg, "A simple startup strategy based on current regulation for Back-EMFbased sensorless control of PMSM," Power Electronics IEEE Transactions, Vol. 27, No. 8, pp. 3817-3825, Feb. 2012. https://doi.org/10.1109/TPEL.2012.2186464
  15. A. Borisavljevic, H. Polinder, and J. Ferreira, "Realization of the I/f control method for a high-speed permanent magnet motor," in The XIX International Conference on Electrical Machines (ICEM), Vol. 4, pp. 2895-2900, Sep. 2010.
  16. W. Wang, Z. Li, and X. Xu, "A novel smooth transition strategy for BEMF-based sensorless drive startup of PMSM," in Intelligent Control and Automation (WCICA) 2014 11th World Congress, pp. 4296-4301, Jun./Jul. 2014.
  17. F. Haichao, S. Boyang, and G. Lizhen, "A closed-loop I/f vector control for permanent magnet synchronous motor," in 2017 9th International Conference on Modelling Identification and Control (ICMIC), pp. 965-969, Jul. 2017.
  18. Y. Yu, D. Chang, X. Zheng, Z. Mi, X. Li, and C. Sun, "A stator current oriented closed-loop I-f control of sensorless SPMSM with fully unknown parameters for reverse rotation prevention," IEEE Transactions on Power Electronics, Vol. 33, No. 10, pp. 8607-8622, Oct. 2018. https://doi.org/10.1109/TPEL.2017.2780191
  19. L. I. Epure, I. Boldea, and F. Blaabjerg, "Hybrid I-f starting and observer-based sensorless control of singlephase BLDC-PM motor drives," IEEE Transactions on Industrial Electronics, Vol. 59, No. 9, pp. 3436-3444, Oct. 2012. https://doi.org/10.1109/TIE.2011.2172176
  20. C. L. Baratieri and H. Pinheiro, "An I-F starting method for smooth and fast transition to sensorless control of BLDC motors," Power Electronics Conference (COBEP) 2013, pp. 836-843, Oct. 2013.