Steel and Composite Structures

  • 제37권1호
  • /
  • Pages.91-98
  • /
  • 2020
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic behavior investigation of the steel multi-story moment frames with steel plate shear walls

  • Mansouri, Iman (Department of Civil Engineering, Birjand University of Technology) ;
  • Arabzadeh, Ali (Department of Civil Engineering, Higher Education Complex of Hormozan) ;
  • Farzampour, Alireza (Department of Civil and Environmental Engineering, Virginia Tech) ;
  • Hu, Jong Wan (Department of Civil and Environmental Engineering, Incheon National University)
  • 투고 : 2019.10.01
  • 심사 : 2020.09.26
  • 발행 : 2020.10.10
⟨ 이전 논문 다음 논문 ⟩

초록

Steel plate shear walls are recently used as efficient seismic lateral resisting systems. These lateral resistant structures are implemented to provide more strength, stiffness and ductility in limited space areas. In this study, the seismic behavior of the multi-story steel frames with steel plate shear walls are investigated for buildings with 4, 8, 12 and 16 stories using verified computational modeling platforms. Different number of steel moment bays with distinctive lengths are investigated to effectively determine the deflection amplification factor for low-rise and high-rise structures. Results showed that the dissipated energy in moment frames with steel plates are significantly related to the inside panel. It is shown that more than 50% of the dissipated energy under various ground motions is dissipated by the panel itself, and increasing the steel plate length leads to higher energy dissipation capability. The deflection amplification factor is studied in details for various verified parametric cases, and it is concluded that for a typical multi-story moment frame with steel plate shear walls, the amplification factor is 4.93 which is less than the recommended conservative values in the design codes. It is shown that the deflection amplification factor decreases if the height of the building increases, for which the frames with more than six stories would have less recommended deflection amplification factor. In addition, increasing the number of bays or decreasing the steel plate shear wall length leads to a reduction of the deflection amplification factor.

키워드

참고문헌

  1. Barua, K. and Bhowmick, A.K. (2019), "Nonlinear seismic performance of code designed perforated steel plate shear walls", Steel Compos. Struct., 31(1), 85-98. https://doi.org/10.12989/scs.2019.31.1.085.
  2. Berman, J. and Bruneau, M. (2003), "Plastic analysis and design of steel plate shear walls", J. Struct. Eng., 129, 1448-1456. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:11(1448).
  3. Berman, J.W. (2011), "Seismic behavior of code designed steel plate shear walls", Eng. Struct., 33(1), 230-244. https://doi.org/10.1016/j.engstruct.2010.10.015.
  4. Berman, J.W., Celik, O.C. and Bruneau, M. (2005), "Comparing hysteretic behavior of light-gauge steel plate shear walls and braced frames", Eng. Struct., 27(3), 475-485. https://doi.org/10.1016/j.engstruct.2004.11.007.
  5. BHRC. (2014), Iranian code of practice for seismic resistant design of buildings: "standard 2800" , Edition 4th. Iran (in Persian).
  6. Brando, G. and De Matteis, G. (2011), "Experimental and numerical analysis of a multi-stiffened pure aluminium shear panel", Thin-Wall. Struct., 49(10), 1277-1287. https://doi.org/10.1016/j.tws.2011.05.007.
  7. Brando, G. and De Matteis, G. (2013), "Buckling resistance of perforated steel angle members", J. Constr. Steel Res., 81, 52-61. https://doi.org/10.1016/j.jcsr.2012.10.009.
  8. Brando, G. and De Matteis, G. (2014), "Design of low strength-high hardening metal multi-stiffened shear plates", Eng. Struct., 60, 2-10. https://doi.org/10.1016/j.engstruct.2013.12.005.
  9. Curkovic, I., Skejic, D., Dzeba, I. and De Matteis, G. (2019), "Seismic performance of composite plate shear walls with variable column flexural stiffness", Steel Compos. Struct., 33(1), 851-868. https://doi.org/10.12989/scs.2019.33.1.851.
  10. De Matteis, G., Brando, G., Caldoso, F. and D'Agostino, F. (2018), "Seismic performance of dual steel frames with dissipative metal shear panels", Ingegneria Sismica, 35(2), 124-141.
  11. Deng, E.F., Zong, L. and Ding, Y. (2019), "Numerical and analytical study on initial stiffness of corrugated steel plate shear walls in modular construction", Steel Compos. Struct., 32(3), 347-359. https://doi.org/10.12989/scs.2019.32.3.347.
  12. Dhar, M.M. and Bhowmick, A.K. (2016), "Seismic response estimation of steel plate shear walls using nonlinear static methods", Steel Compos. Struct., 20(4), 777-799. https://doi.org/10.12989/scs.2016.20.4.777.
  13. Driver, R.G., Kulak, G.L., Kennedy, D.J.L. and Elwi, A.E. (1998), "Cyclic test of four-story steel plate shear wall", J. Struct. Eng., 124, 112-120. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(112)
  14. Elgaaly, M. (1998), "Thin steel plate shear walls behavior and analysis", Thin-Wall. Struct., 32(1-3), 151-180. https://doi.org/10.1016/S0263-8231(98)00031-7.
  15. Farzampour, A., Laman, J.A. and Mofid, M. (2015), "Behavior prediction of corrugated steel plate shear walls with openings", J. Constr. Steel Res., 114, 258-268. https://doi.org/10.1016/j.jcsr.2015.07.018.
  16. Farzampour, A., Mansouri, I. and Hu, J.W. (2018a), "Seismic behavior investigation of the corrugated steel shear walls considering variations of corrugation geometrical characteristics", Int. J. Steel Struct., 18(4), 1297-1305. https://doi.org/10.1007/s13296-018-0121-z.
  17. Farzampour, A., Mansouri, I., Lee, C.H., Sim, H.B. and Hu, J.W. (2018b), "Analysis and design recommendations for corrugated steel plate shear walls with a reduced beam section", Thin-Wall. Struct., 132, 658-666. https://doi.org/10.1016/j.tws.2018.09.026.
  18. Farzampour, A. and Yekrangnia, M. (2014), "On the behavior of corrugated steel shear walls with and without openings", Proceedings of the 2nd European Conference on Earthquake Engineering and Seismology, Turkey.
  19. FEMA-P695. (2009), Quantification of building seismic performance factors. Washington D.C.
  20. FEMA-P1051. (2015), NEHRP recommended seismic provisions: design examples. Washington D.C.
  21. Gholhaki, M. and Ghadaksaz, M.B. (2016), "Investigation of the link beam length of a coupled steel plate shear wall", Steel Compos. Struct., 20(1), 107-125. https://doi.org/10.12989/scs.2016.20.1.107.
  22. Ghosh, S. and Kharmale, S.B. (2010), "Research on steel plate shear wall: Past, present and future, Structural Steel and Castings: Shapes and Standards, Properties and Applications", Nova Science Publishers Inc.
  23. Han, Q., Zhang, Y., Wang, D. and Sakata, H. (2019), "Seismic behavior of buckling-restrained steel plate shear wall with assembled multi-RC panels", J. Constr. Steel Res., 157, 397-413. https://doi.org/10.1016/j.jcsr.2019.02.026.
  24. Jalali, S.A. and Banazadeh, M. (2016), "Development of a new deteriorating hysteresis model for seismic collapse assessment of thin steel plate shear walls", Thin-Wall. Struct., 106, 244-257. https://doi.org/10.1016/j.tws.2016.05.008.
  25. Kanvinde, A.M. and Grilli, D.A. (2012), IBC SEAOC Structural/Seismic Design Manual Vol. 4, Examples for Steel-Frame Buildings. Structural Engineers Association of California Sacramento, CA
  26. Liu, W.Y., Li, G.Q. and Jiang, J. (2018), "Capacity design of boundary elements of beam-connected buckling restrained steel plate shear wall", Steel Compos. Struct., 29(2), 231-242. https://doi.org/10.12989/scs.2018.29.2.231.
  27. Ma, Z.Y., Hao, J.P. and Yu, H.S. (2018), "Shaking-table test of a novel buckling-restrained multi-stiffened low-yield-point steel plate shear wall", J. Constr. Steel Res., 145, 128-136. https://doi.org/10.1016/j.jcsr.2018.02.009.
  28. Ozcelik, Y. and Clayton, P.M. (2017), "Strip model for steel plate shear walls with beam-connected web plates", Eng. Struct., 136, 369-379. https://doi.org/https://doi.org/10.1016/j.engstruct.2017.01.051.
  29. Paslar, N., Farzampour, A. and Hatami, F. (2020a), "Infill plate interconnection effects on the structural behavior of steel plate shear walls", Thin-Wall. Struct., 149. https://doi.org/10.1016/j.tws.2020.106621.
  30. Paslar, N., Farzampour, A. and Hatami, F. (2020b), "Investigation of the infill plate boundary condition effects on the overall performance of the steel plate shear walls with circular openings", Struct., 27, 824-836. https://doi.org/10.1016/j.istruc.2020.06.031.
  31. Pavir, A. and Shekastehband, B. (2017), "Hysteretic behavior of coupled steel plate shear walls", J. Constr. Steel Res., 133, 19-35. https://doi.org/10.1016/j.jcsr.2017.01.019.
  32. Phillips, A.R. and Eatherton, M.R. (2018), "Large-scale experimental study of ring shaped-steel plate shear walls", J. Struct. Eng., 144(8). https://doi.org/10.1061/(ASCE)ST.1943-541X.0002119.
  33. Qin, Y., Lu, J.Y., Huang, L.C.X. and Cao, S. (2017), "Flexural behavior of beams in steel plate shear walls", Steel Compos. Struct., 23(4), 473-481. https://doi.org/10.12989/scs.2017.23.4.473.
  34. Qiu, J., Zhao, Q., Yu, C. and Li, Z. (2018), "Experimental studies on cyclic behavior of corrugated steel plate shear walls", J. Struct. Eng., 144(11). https://doi.org/10.1061/(ASCE)ST.1943-541X.0002165.
  35. Qureshi, R.K. and Bruneau, M. (2019), "Behavior of steel plate shear walls subjected to repeated synthetic ground motions", J. Struct. Eng., 145(4). https://doi.org/10.1061/(ASCE)ST.1943-541X.0002281.
  36. Roberts, T.M. and Ghomi, S.S. (1991), "Hysteretic characteristics of unstiffened plate shear panels", Thin-Walled Struct., 12(2), 145-162. https://doi.org/10.1016/0263-8231(91)90061-M.
  37. Sabouri-Ghomi, S., Ahouri, E., Sajadi, R., Alavi, M., Roufegarinejad, A. and Bradford, M.A. (2012), "Stiffness and strength degradation of steel shear walls having an arbitrarily-located opening", J. Constr. Steel Res., 79, 91-100. https://doi.org/10.1016/j.jcsr.2012.07.017.
  38. Thorburn, L.J., Kulak, G.L. and Montgomery, C.J. (1983), "Analysis of steel plate shear walls", Structural Engineering Report 107, University of Alberta, Canada.
  39. Timler, P.A. and Kulak, G.L. (1983), "Experimental study of steel plate shear walls", Structural Engineering, Report 114, University of Alberta, Canada.
  40. Youssef, N., Wilkerson, R., Fischer, K. and Tunick, D. (2010), "Seismic performance of a 55-storey steel plate shear wall", Struct. Des. Tall Spec. Build., 19(1-2), 139-165. https://doi.org/10.1002/tal.545.
  41. Zhao, Q., Sun, J., Li, Y. and Li, Z. (2017), "Cyclic analyses of corrugated steel plate shear walls", Struct. Des. Tall Spec. Build., 26(16). https://doi.org/10.1002/tal.1351.