DOI QR코드

DOI QR Code

Experimental study on seismic behavior of exterior composite beam-to-column joints with large size stiffened angles

  • Wang, Peng (School of Civil Engineering and Transportation, South China University of Technology) ;
  • Wang, Zhan (School of Civil Engineering and Transportation, South China University of Technology) ;
  • Pan, Jianrong (School of Civil Engineering and Transportation, South China University of Technology) ;
  • Li, Bin (School of Civil Engineering and Transportation, South China University of Technology) ;
  • Wang, Bo (School of Civil Engineering and Transportation, South China University of Technology)
  • 투고 : 2019.07.03
  • 심사 : 2020.09.25
  • 발행 : 2020.10.10

초록

The top-and-seat angles with double web angles are commonly used in the design of beam-to-column joints in Asian and North American countries. The seismic behavior analysis of these joints with large cross-section size of beam and column (often connected by four or more bolts) is a challenge due to the effects from the relatively larger size of stiffened angles and the composite action from the adjacent concrete slab. This paper presents an experimental investigation on the seismic performance of exterior composite beam-to-column joints with stiffened angles under cyclic loading. Four full-scale composite joints with different configuration (only one specimen contain top angle in concrete slab) were designed and tested. The joint specimens were designed by considering the effects of top angles, longitudinal reinforcement bars and arrangement of bolts. The behavior of the joints was carefully investigated, in terms of the failure modes, slippage, backbone curves, strength degradation, and energy dissipation abilities. It was found that the slippage between top-and-seat angles and beam flange, web angle and beam web led to a notable pinching effect, in addition, the ability of the energy dissipation was significantly reduced. The effect of anchored beams on the behavior of the joints was limited due to premature failure in concrete, the concrete slab that closes to the column flange and upper flange of beam plays an significant role when the joint subjected to the sagging moment. It is demonstrated that the ductility of the joints was significantly improved by the staggered bolts and welded longitudinal reinforcement bars.

키워드

참고문헌

  1. Abdalla, K.M., Drosopoulos, G.A. and Stavroulakis, G.E. (2015), "Failure Behavior of a Top and Seat Angle Bolted Steel Connection with Double Web Angles", J. Struct. Eng., 141(7). https://doi.org/10.1061/(asce)st.1943-541x.0001132.
  2. Amadio, C. and Fragiacomo, M. (2003), "Analysis of rigid and semi-rigid steel-concrete composite joints under monotonic loading Part I: Finite element modelling and validation", Steel Compos. Struct., 3(5), 349-369. https://doi.org/10.12989/scs.2003.3.5.349.
  3. ANSI/AISC-341-16 (2016), Seismic provisions for Structural Steel Buildings. American Institute of Steel Construction. Chicago.
  4. Artar, M. and Daloglu, A.T. (2015), "Optimum design of composite steel frames with semi-rigid connections and column bases via genetic algorithm", Steel Compos. Struct., 19(4), 1035-1053. https://doi.org/10.12989/scs.2015.19.4.1035.
  5. Brunesi, E., Nascimbene, R. and Rassati, G.A. (2014), "Response of partially-restrained bolted beam-to-column connections under cyclic loads", J.Constr. Steel Res., 97, 24-38. https://doi.org/10.1016/j.jcsr.2014.01.014.
  6. CEN-1993-8 (2005), Eurocode 3: Design of steel structures. Part 1-8: Design of Joints. European Committee for Standardization. Brussels.
  7. Citipitioglu, A.M., Haj-Ali, R.M. and White, D.W. (2002), "Refined 3D finite element modeling of partially-restrained connections including slip", J. Constr. Steel Res., 58(5-8), 995-1013. https://doi.org/10.1016/s0143-974x(01)00087-6.
  8. Garlock, M.M., Ricle, J.M. and Sause, R.(2003), "Cyclic load tests and analysis of bolted top-and-seat angle connections", J. Struct. Eng., 129(12), 1615-1625. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:12(1615).
  9. GB50017-2017 (2018), Standard for design of steel structures. Beijing, China Architecture and Building Press.
  10. Gil, B. and Bayo, E. (2008), "An alternative design for internal and external semi-rigid composite joints. Part I: Experimental research", Eng. Struct., 30(1), 218-231. https://doi.org/10.1016/j.engstruct.2007.03.009.
  11. Gil, B., Goni, R. and Bayo, E. (2013). "Experimental and numerical validation of a new design for three-dimensional semi-rigid composite joints", Eng. Struct., 48, 55-69. https://doi.org/10.1016/j.engstruct.2012.08.034.
  12. Hantouche, E.G. and Mouannes, E.N. (2016), "Strength and stiffness modeling of extended endplate connections with circular and rectangular bolt configurations", Steel Compos.Struct., 22(2), 323-352. https://doi.org/10.12989/scs.2016.22.2.323.
  13. Kiamanesh, R., A. Abolmaali and M. Razavi. (2013). "Effect of Circular Bolt Pattern on Behavior of Extended End-Plate Connection", J. Struct. Eng. 139(11): 1833-1841. https://doi.org/10.1061/(asce)st.1943-541x.0000765.
  14. Kumar, S.R.S. and Smitha, M.S. (2013), "Steel-concrete composite flange plate connections: Cyclic performance and tests", J. Constr. Steel Res., 83(3), 216-222. https://doi.org/10.1016/j.jcsr.2013.01.003.
  15. Lee, C.H., Jung, J.H., Kim, S.Y. and Kim, J.J. (2016), "Investigation of Composite Slab Effect on Seismic Performance of Steel Moment Connections", J. Constr. Steel Res., 117, 91-100. https://doi.org/10.1016/j.jcsr.2015.10.004.
  16. Lee, S.S. and Moon, T.S. (2002), "Moment-rotation model of semi-rigid connections with angles", Eng. Struct., 24(2), 227-237. https://doi.org/10.1016/s0141-0296(01)00066-9.
  17. Ma, H., Wang, J., Lui, E.M., Wan, Z. and Wang, K. (2019), "Experimental study of the behavior of beam-column connections with expanded beam flanges", Steel Compos. Struct., 31(3), 319-327. https://doi.org/10.12989/scs.2019.31.3.319.
  18. Meng, B., Zhong, W. and Hao, J. (2018), "Anti-progressive collapse behavior of beam-to-column assemblies with bolted-angle connections under different span ratios", Adv. Struct Eng., 21(6), 891-905. https://doi.org/10.1177/1369433217734636.
  19. Pirmoz, A., Khoei, A.S., Mohammadrezapour, E. and Daryan, A.S. (2009), "Moment-rotation behavior of bolted top-seat angle connections", J. Constr. Steel Res., 65(4), 973-984. https://doi.org/10.1016/j.jcsr.2008.08.011.
  20. Reinosa, J.M., Loureiro, A., Gutierrez, R. and Lopez, M. (2015), "Analytical plate approach for the axial stiffness prediction of stiffened angle cleats", J. Constr. Steel Res., 106, 77-88. https://doi.org/10.1016/j.jcsr.2014.12.010.
  21. Reinosa, J.M., Loureiro, A., Gutierrez, R. and Lopez, M. (2019), "Mechanical stiffness prediction of beam-to-column stiffened angle joints", J. Constr. Steel Res., 105875. https://doi.org/10.1016/j.jcsr.2019.105875.
  22. Wang, J., Lu, J., Zhang, H. and Zhao, C. (2018), "Experimental investigation on seismic performance of endplate composite joints to CFST columns", J. Constr. Steel Res., 145, 352-367. https://doi.org/10.1016/j.jcsr.2018.03.006.
  23. Wang, P. (2018), "Study on Mechanical Behaviors of Beam-to-Column Connection with Stiffened Top and Seat Angles", Ph.D. Dissertation. South China University of Technology. Guangzhou..
  24. Wang, P., Pan, J., Wang, Z. and Chen, S. (2018), "Experimental and analytical behavior of stiffened angle joints", Steel Compos. Struct., 26(1), 67-78. https://doi.org/10.12989/scs.2018.26.1.067.
  25. Xiao, Y., Choo, B. and Nethercot, D. (1994), "Composite connections in steel and concrete. I. Experimental behaviour of composite beam-Column connections", J. Constr. Steel Res., 31(1), 3-30. https://doi.org/10.1016/0143-974X(94)90021-3.
  26. Yuan, Z., Tan, K.H. and Ting, S.K. (2011), "Testing of composite steel top-and-seat-and-web angle joints at ambient and elevated temperatures, Part 1: Ambient tests", Eng. Struct., 33(10), 2727-2743. https://doi.org/10.1016/j.engstruct.2011.04.027.