Acknowledgement
본 연구는 산업통상자원부(MOTIE)와 한국에너지기술평가원(KETEP)의 지원을 받아 수행한 연구 과제입니다. (No. 20181110200070)
References
-
Choi, Y. J., Park, J. Y., Lee, S. J., Heo, N. I., & Kim, W. J. (2002). A fundamental study on the properties of NO
$_X$ removal on cement mortar with TiO$_2$ powder as photocatalyst, Journal of The Architectural Institute of Korea Structure & Construction, 18(8), 43-50. -
Hong, S. C. (2006). The effect of SO
$_2$ in flue gas on the SCR activity of V/TiO$_2$ , Journal of the Korean Industrial and Engineering Chemistry, 17(5), 490-497. - Hong, S. J., & Lee, S. W. (2013). An experimental study for the construction of photocatalytic method concrete road structure, International Journal of Highway Engineering, 15(6), 1-9. https://doi.org/10.7855/IJHE.2013.15.6.001
- ISO 22197-1, 2007, Test method for air-purification performance of semiconducting photocatalytic materials-part 1: Removal of nitric oxide, International Standard.
- Japan Concrete Institute, Research Committee Report for the Establishment of Design and Construction Method for Porous Concrete, 2003.
- Korea Agency for Technology and Standards. (2019). Standard test method for sieve analysis of fine and coarse aggregates (KS F 2502:2019), Korea Standards Association. (in Korean)
- Korea Agency for Technology and Standards. (2019). Testing method for density and absorption of coarse aggregate (KS F 2503:2019), Korea Standards Association. (in Korean)
- Lee, B. Y. (2012). Effect of titanium dioxide nanoparticles on early age and long term properties of cementitious materials, Ph.D. Dissertation, Georgia Institute of Technology.
- Lee, J. U., Yang, K. H., & Mun, J. H. (2020). Fluidity and compressive strength properties of foamed concrete mixed with fly ash and ground granulated blast furnace slag, Journal of the Korea Concrete Institute, 32(2), 137-144. https://doi.org/10.4334/JKCI.2020.32.2.137
-
Lee, J. T., Jeong, J. S., Yun, T. K., & Bae, J. Y. (2010). Photocatalytic activity of TiO
$_2$ nanoparticles with different structure and morphology, Journal of Industrial and Engineering Chemistry, 14(1), 21-24. - Lee, K. H., & Park, W. J. (2010). The removal properties of NOX with the photocatalystic (TiO2) and UV optical science reactions, Korea Academia-Industrial cooperation Society, 11(9), 3578-3582. https://doi.org/10.5762/KAIS.2010.11.9.3578
- Lucas, S. S., Ferreira, V. M., & Aguiar, J. B. (2013). Incorporation of titanium dioxide nanoparticles in mortars-influence of microstructure in the hardened state properties and photocatalytic activity, Cement and Concrete Research, 43, 112-120. https://doi.org/10.1016/j.cemconres.2012.09.007
-
Park, J. G., Lim, H. A., & Park, Y. K. (2019). Evaluation of nitrogen oxide removal characteristics using TiO
$_2$ , Journal of the Korean Applied Science and Technology, 36(2), 668-675. https://doi.org/10.12925/JKOCS.2019.36.2.668 - Poon, C. S., & Cheung, E. (2007). NO removal efficiency of photocatalytic paving blocks prepared with recycled materials, Construction and Building Materials, 21(8), 1746-1753. https://doi.org/10.1016/j.conbuildmat.2006.05.018
-
Seo, D. W., & Yun, T. S. (2016). Experimental study on capacity variation of paving materials with TiO
$_2$ in wet condition, Journal of the Korean Geotechnical Society, 32(5), 49-55. https://doi.org/10.7843/kgs.2016.32.5.49 - Sim, J. I., & Yang, K. H. (2011). Mechanical properties of lightweight aggregate concrete according to the substitution rate of natural sand and maximum aggregate size, Journal of the Korea Concrete Institute, 23(5), 551-558. https://doi.org/10.4334/JKCI.2011.23.5.551
- Yang, W. H. (2001). An Experimental Study on the Properties of Foamed Concrete within Blast-Furnace Slag, Master Thesis, Konkuk University.
-
Yoon, I. H. (2017). A study on the NO
$_X$ reduction using the photocatalyst(TiO$_2$ ) block in the ambient, Master Thesis, The University of Seoul. -
Yoon, I. H., Lee, K. B., Kim, J. S., & Kim, S. D. (2017). A study on the estimation of NO
$_X$ reduction in ambient by photocatalyst(TiO$_2$ ) block, Journal of the Korean Society of Urban Environment, 17(4), 433-443.