DOI QR코드

DOI QR Code

Structural Safety Evaluation of Tomb of King Muryeong in Tumulis of Songsan-ri Through Finite Element Analysis

유한요소해석을 통한 송산리고분군 무령왕릉의 구조안전성 평가

  • Lee, Ga-Yoon (College of Architecture, Sejong University) ;
  • Jo, Young Hoon (Dept. of Cultural Heritage Conservation Sciences, Kongju National University) ;
  • Lee, Sung-Min (Korea Construction Quality Research Center(KCQR)) ;
  • Lee, Chan Hee (Dept. of Cultural Heritage Conservation Sciences, Kongju National University) ;
  • Lee, Kihak (College of Architecture, Sejong University)
  • 이가윤 (세종대학교 건축공학과) ;
  • 조영훈 (공주대학교 문화재보존과학과) ;
  • 이성민 ((재)한국건설품질연구원) ;
  • 이찬희 (공주대학교 문화재보존과학과) ;
  • 이기학 (세종대학교 건축공학과)
  • Received : 2020.06.30
  • Accepted : 2020.07.21
  • Published : 2020.09.15

Abstract

Tomb of King Muryeong, located in Sonsan-ri, was found vulnerable due to leakages during since the summer of 2016. This research aims to evaluate structural safety of the Tomb under the tumulus. Site surveys were conducted to find vulnerable inner parts. Structural safety assessment is presented based on both site survey results and analytical results obtained through FEM analysis using the ANSYS program. The underground structure was explicitly modeled to focus on two types of loadings: design loads and actual gravity loads. In general, the tomb does not show any critical deflection increase or damage through the analytical investigation. However, maintenance through continuous monitoring is necessary to prevent severe deflections and stress concentrations since the rigidity of the tomb materials are very vulnerable and likely to be reduced due to prolonged weathering and continuous rain leakage.

Keywords

References

  1. Gongju University Institute of Basic Science, "Status and Conservation of Songsan-ri tombs", 1997.
  2. Kwon, Y. H., & Hong, S. G. (2012). Material Properties of Traditional Bricks and Lime Mortars Used in Masonry Tombs of Baekje Dynasty. Proceedings of the Korea Concrete Institute, Republic of Korea, Vol.24, No.2, pp.151-152
  3. Kwon, Y. H., & Hong, S. G., "Material Characteristics of Traditional Bricks used in the Royal Tomb of King Muryeong, Gongju, Korea and Its Reproduction Bricks", Journal of Conservation Science, Vol.30, No.3, pp.287-298, 2014, doi: 10.12654/JCS.2014.30.3.04
  4. Ridwan, M., Yoshitake, I., & Nassif, A. Y., "Proposal of Design Formulae for Equivalent Elasticity of Masonry Structures Made with Bricks of Low Modulus", Advances in Civil Engineering, Vol.2017, pp.1-11, 2017, doi: 10.1155/2017/6456070
  5. Ni, Y., Yang, W., & Jiang, Y., "Analyses of the Elastic Modulus Values of Masonry", Applied Mechanics and Materials, Vols.204-208, pp.889-892, 2012, doi: 10.4028/www.scientific.net/AMM.204-208.889
  6. Das, B. M., "Principles of Geotechnical Engineering", 7th ed., Cengage Learning, pp.424-487, 2010.
  7. Atamturktur, S., Li, T., Ramage, M. H., & Farajpour, I., "Load carrying capacity assessment of a scaled masonry dome: Simulations validated with non-destructive and destructive measurements", Constructions and Building Materials, Vol.34, pp.418-429, 2012, doi: 10.1016/j.conbuildmat.2012.02.031
  8. Li, T., & Atamturktur, S., "Fidelity and Robustness of Detailed Micromodeling, Simplified Micromodeling, and Macromodeling Techniques for a Masonry Dome", Journal of Performance of Constructed Facilities, Vol.28, No.3, pp.480-490, 2014 https://doi.org/10.1061/(ASCE)CF.1943-5509.0000440
  9. ANSYS Academic Research Mechanical, Release 19.0.