Applied Microscopy

  • Volume 50
  • /
  • Pages.22.1-22.6
  • /
  • 2020
  • /
  • 2287-5123(pISSN)
  • /
  • 2287-4445(eISSN)
Korean Society of Microscopy (한국현미경학회)
권호 표지
DOI QR코드

DOI QR Code

Method of Ga removal from a specimen on a microelectromechanical system-based chip for in-situ transmission electron microscopy

  • Yena Kwon (School of Advanced Materials Science and Engineering, Sungkyunkwan University) ;
  • Byeong-Seon An (School of Advanced Materials Science and Engineering, Sungkyunkwan University) ;
  • Yeon-Ju Shin (Cooperative Center for Research Facilities, Sungkyunkwan University) ;
  • Cheol-Woong Yang (School of Advanced Materials Science and Engineering, Sungkyunkwan University)
  • Received : 2020.09.17
  • Accepted : 2020.09.28
  • Published : 2020.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

In-situ transmission electron microscopy (TEM) holders that employ a chip-type specimen stage have been widely utilized in recent years. The specimen on the microelectromechanical system (MEMS)-based chip is commonly prepared by focused ion beam (FIB) milling and ex-situ lift-out (EXLO). However, the FIB-milled thin-foil specimens are inevitably contaminated with Ga+ ions. When these specimens are heated for real time observation, the Ga+ ions influence the reaction or aggregate in the protection layer. An effective method of removing the Ga residue by Ar+ ion milling within FIB system was explored in this study. However, the Ga residue remained in the thin-foil specimen that was extracted by EXLO from the trench after the conduct of Ar+ ion milling. To address this drawback, the thin-foil specimen was attached to an FIB lift-out grid, subjected to Ar+ ion milling, and subsequently transferred to an MEMS-based chip by EXLO. The removal of the Ga residue was confirmed by energy dispersive spectroscopy.

Keywords

Acknowledgement

The authors are grateful for the support from the Cooperative Center for Research Facilities (CCRF) at Sungkyunkwan University.

References

  1. M.J. Campin, C.S. Bonifacio, P. Nowakowski, P.E. Fischione, L.A. Giannuzzi, Narrow-Beam Argon Ion Milling of Ex Situ Lift-out FIB Specimens Mounted on Various Carbon-Supported Grids (Paper presented at the 44th International Symposium for Testing and Failure Analysis, Phoenix, 2018)
  2. M. Duchamp, Q. Xu, R.E. Dunin-borkowski, Convenient preparation of high-quality specimens for annealing experiments in the transmission electron microscope. Microsc. Microanal. 20, 1638-1645 (2014). https://doi.org/10.1017/S1431927614013476
  3. L.A. Giannuzzi, J.L. Drown, S.R. Brown, R.B. Irwin, F.A. Stevie, Focused ion beam milling and micromanipulation lift out for site specific cross-section TEM specimen preparation. MRS Proc. 480, 19 (1997)
  4. L.A. Giannuzzi, Z. Yu, D. Yin, M.P. Harmer, Q. Xu, N.S. Smith, L. Chan, J. Hiller, D. Hess, T. Clark, Theory and new applications of ex situ lift out. Microsc. Microanal. 21, 1034-1048 (2015). https://doi.org/10.1017/S1431927615013720
  5. L.R. Heringer, S. Chevacharoenkul, D.C. Erwin, TEM Sample Preparation Using a Focused Ion Beam and a Probe Manipulator (Paper presented at the 22nd International Symposium for Testing and Failure Analysis, Los Angeles, 1996)
  6. D.S. Ko, Y.M. Park, S.D. Kim, Y.W. Kim, Effective removal of Ga residue from focused ion beam using a plasma cleaner. Ultramicroscopy 107, 368-373 (2007). https://doi.org/10.1016/j.ultramic.2006.09.004
  7. L. Mele, S. Konings, P. Dona, F. Evertz, C. Mitterbauer, P. Faber, R. Schampers, J.R. Jinschek, A MEMS-based heating holder for the direct imaging of simultaneous in-situ heating and biasing experiments in scanning/transmission electron microscopes. Microsc. Res. Tech. 79, 239 (2016)
  8. Y. Pivak, H.H. Perez Garza, A. Zintler, L. Molina-Luna, FIB Lamella Sample Preparation on to MEMS Nano-Chips for In Situ TEM Applications (Paper presented at the 1st European FIB Network Workshop, Graz, 2017)
  9. F.A. Stevie, L.A. Giannuzzi, B.I. Prenitzer, in Introduction to Focused Ion Beams, ed. by L. A. Giannuzzi, F. A. Stevie. The focused ion beam instrument (Springer, Boston, 2005), p. 1
  10. K.A. Unoci, M.J. Mills, G.S. Daehn, Effect of gallium focused ion beam milling on preparation of aluminum thin foils. J. Microsc. 240, 227-238 (2010). https://doi.org/10.1111/j.1365-2818.2010.03401.x
  11. S. Vijayan, J.R. Jinschek, S. Kujawa, J. Greiser, M. Aindow, Focused ion beam preparation of specimens for micro-electro-mechanical system-based transmission electron microscopy heating experiments. Microsc. Microanal. 23, 708 (2017)