DOI QR코드

DOI QR Code

Prediction of mechanical properties of limestone concrete after high temperature exposure with artificial neural networks

  • Blumauer, Urska (Faculty of Civil and Geodetic Engineering, University of Ljubljana) ;
  • Hozjan, Tomaz (Faculty of Civil and Geodetic Engineering, University of Ljubljana) ;
  • Trtnik, Gregor (Building Materials Institute)
  • 투고 : 2020.02.20
  • 심사 : 2020.08.13
  • 발행 : 2020.09.25

초록

In this paper the possibility of using different regression models to predict the mechanical properties of limestone concrete after exposure to high temperatures, based on the results of non-destructive techniques, that could be easily used in-situ, is discussed. Extensive experimental work was carried out on limestone concrete mixtures, that differed in the water to cement (w/c) ratio, the type of cement and the quantity of superplasticizer added. After standard curing, the specimens were exposed to various high temperature levels, i.e., 200℃, 400℃, 600℃ or 800℃. Before heating, the reference mechanical properties of the concrete were determined at ambient temperature. After the heating process, the specimens were cooled naturally to ambient temperature and tested using non-destructive techniques. Among the mechanical properties of the specimens after heating, known also as the residual mechanical properties, the residual modulus of elasticity, compressive and flexural strengths were determined. The results show that residual modulus of elasticity, compressive and flexural strengths can be reliably predicted using an artificial neural network approach based on ultrasonic pulse velocity, residual surface strength, some mixture parameters and maximal temperature reached in concrete during heating.

키워드

참고문헌

  1. Abbas, H., Al-Salloum, Y.A., Elsanadedy, H.M. and Almusallam, T.H. (2019), "ANN models for prediction of residual strength of HSC after exposure to elevated temperatures", Fire Saf. J., 106, 13-28. https://doi.org/10.1016/j.firesaf.2019.03.011.
  2. Ada, M., Sevim, B., Yuzer, N. and Ayvaz, Y. (2018), "Assessment of damages on a RC building after a big fire", Adv. Concrete Constr., 6(2), 177-197. https://doi.org/10.12989/acc.2018.6.2.177.
  3. Arioz, O. (2007), "Effects of elevated temperatures on properties of concrete", Fire. Saf. J., 42(8), 516-522. https://doi.org/10.1016/j.firesaf.2007.01.003.
  4. Arioz, O. (2009), "Retained properties of concrete exposed to high temperatures: Size effect", Fire Mater., 33, 211-222. https://doi.org/10.1002/fam.996.
  5. Aslani, F. and Samali, B. (2013), "Predicting the bond between concrete and reinforcing steel at elevated temperatures", Struct. Eng. Mech., 48(5), 643-660. http://dx.doi.org/10.12989/sem.2013.48.5.643.
  6. Cadorin, J.F. and Franssen, J.M. (2003), "A tool to design steel elements submitted to compartment fires - OZone V2. Part 1: pre- and post-flashover compartment fire model", Fire Saf. J., 38, 395-427. https://doi.org/10.1016/S0379-7112(03)00014-6.
  7. Chaix, J.F., Garnier, V. and Corneloup, G. (2003), "Concrete damage evolution analysis by backscattered ultrasonic waves", NDT E Int., 36(7), 461-469. https://doi.org/10.1016/S0963-8695(03)00066-5.
  8. Chan, Y.N., Jin, P., Anson, M. and Wang, J.S. (1998), "Fire resistance of concrete: prediction using artificial neural networks", Mag. Concrete Res., 50(4), 353-358. https://doi.org/10.1680/macr.1998.50.4.353.
  9. Dolinar, U., Trtnik, G., Turk, G. and Hozjan, T. (2019), "The feasibility of estimation of mechanical properties of limestone concrete after fire using nondestructive methods", Constr. Build. Mater., 228, 116786. https://doi.org/10.1016/j.conbuildmat.2019.116786.
  10. dos Santos, C.C. and Rodrigues, J.P.C. (2016), "Calcareous and granite aggregate concretes after fire", J. Build. Eng., 8, 231-242. https://doi.org/10.1016/j.jobe.2016.09.009.
  11. EN 12390-3:2009, Testing Hardened Concrete - Part 3: Compressive Strength of Test Specimens.
  12. EN 12390-5:2009, Testing Hardened Concrete - Part 5: Flexural Strength of Test Specimens.
  13. EN 12504-2:2002, Testing Concrete in Structures - Part 2: Non-Destructive Testing - Determination of Rebound Number.
  14. EN 12504-4: 2004, Testing Concrete - Part 4: Determination of Ultrasonic Pulse Velocity.
  15. EN 1992-1-2:2004, Eurocode 2: Design of Concrete Structures - Part 1-2: General Rules - Structural Fire Design.
  16. Gupta, T., Patel, K.A., Siddique, S., Sharma, R.K. and Chaudhary, S. (2019), "Prediction of mechanical properties of rubberised concrete exposed to elevated temperature using ANN", Measure., 147, 106870. https://doi.org/10.1016/j.measurement.2019.106870.
  17. Hagan, M.T., Demuth, H.B., Beale, M.H. and De Jesus, O. (2014), Neural Network Design, 2nd Edition, Self Published.
  18. Haykin, S. (2009), Neural Networks and Learning Machines, Pearson Education, Inc., Upper Saddle River, New Jersy.
  19. Hertz, K.D. (2005), "Concrete strength for fire safety design", Mag. Concrete Res., 57(8), 445-453. https://doi.org/10.1680/macr.2005.57.8.445.
  20. Hornik, K., Stinchcombe, M. and White, H. (1989), "Multilayer feedforward networks are universal approximators", Neur. Network., 2(5), 359-366. https://doi.org/10.1016/0893-6080(89)90020-8.
  21. ISO 1920-10:2010, Testing of Concrete - Part 10: Determination of Static Modulus of Elasticity in Compression.
  22. Krzemien, K. and Hager, I. (2015), "Post-fire assessment of mechanical properties of concrete with the use of the impact-echo method", Constr. Build. Mater., 96, 155-163. https://doi.org/10.1016/j.conbuildmat.2015.08.007.
  23. Ma, Q.M., Guo, R.X., Zhao, Z.M., Lin, Z.W. and He, K.C. (2015), "Mechanical properties of concrete at high temperature - a review", Constr. Build. Mater., 93, 371-383. http://dx.doi.org/10.1016/j.conbuildmat.2015.05.131.
  24. Matlab (1999) The Language of Technical Computing, The Mathworks Inc.
  25. Molkens, T., Van Coile, R. and Gernay, T. (2017), "Assessment of damage and residual load bearing capacity of concrete slab after fire: Applied reliability-based methodology", Eng. Struct., 150, 969-985. http://dx.doi.org/10.1016/j.engstruct.2017.07.078.
  26. Park, G.K. and Yim, H.J. (2017), "Evaluation of fire-damaged concrete: An experimental analysis based on destructive and nondestructive methods", Int. J. Concrete Struct. Mater., 11(3), 447-457. https://doi.org/10.1007/s40069-017-0211-x.
  27. Park, S.J. and Yim, H.J. (2016), "Evaluation of residual mechanical properties of concrete after exposure to high temperatures using impact resonance method", Constr. Build. Mater., 129, 89-97. https://doi.org/10.1016/j.conbuildmat.2016.10.116.
  28. Park, S.J., Park, G.K., Yim, H.J. and Kwak, H.G. (2015), "Evaluation of residual tensile strength of fire-damaged concrete using a non-linear resonance vibration method", Mag. Concrete Res., 67(5), 235-246. https://doi.org/10.1680/macr.14.00259.
  29. Park, S.J., Yim, H.J. and Kwak, H.G. (2014), "Nonlinear resonance vibration method to estimate the damage level on heat-exposed concrete", Fire Saf. J., 69, 36-42. https://doi.org/10.1016/j.firesaf.2014.07.003.
  30. Payan, C., Garnier, V., Moysan, J. and Johnson, P.A. (2007), "Applying nonlinear resonant ultrasound spectroscopy to improving thermal damage assessment in concrete", J. Acoust. Soc. Am., 121(4), EL125-EL130. https://doi.org/10.1121/1.2710745.
  31. Savva, A., Manita, P. and Sideris, K.K. (2005), "Influence of elevated temperatures on the mechanical properties of blended cement concretes prepared with limestone and siliceous aggregates", Cement Concrete Compos., 27(2), 239-248. https://doi.org/10.1016/j.cemconcomp.2004.02.013.
  32. Shah, A.A., Alsayed, S.H., Abbas, H. and Al-Salloum, Y.A. (2012), "Predicting residual strength of non-linear ultrasonically evaluated damaged concrete using artificial neural network", Constr. Build. Mater., 29, 42-50. https://doi.org/10.1016/j.conbuildmat.2011.10.038.
  33. Trtnik, G., Kavcic, F. and Turk, G. (2009), "Prediction of concrete strength using ultrasonic pulse velocity and artificial neural networks", Ultrasonics, 49(1), 53-60. https://doi.org/10.1016/j.ultras.2008.05.001.
  34. Turkmen, I., Bingol, A.F., Tortum, A., Demirboga, R. and Gul, R. (2017), "Properties of pumice aggregate concretes at elevated temperatures and comparison with ANN models", Fire Mater., 41, 142-153. https://doi.org/10.1002/fam.2374.
  35. Vakharia, V. and Gujar, R. (2019), "Prediction of compressive strength and portland cement composition using cross-validation and feature ranking techniques", Constr. Build. Mater., 225, 292-301. https://doi.org/10.1016/j.conbuildmat.2019.07.224.
  36. Varona, F.B., Baeza, F.J., Bru, D. and Ivorra, S. (2018), "Evolution of the bond strength between reinforcing steel and fibre reinforced concrete after high temperature exposure", Constr. Build. Mater., 176, 359-370. https://doi.org/10.1016/j.conbuildmat.2018.05.065.
  37. Varona, F.B., Baeza, F.J., Bru, D. and Ivorra, S. (2020), "Non-linear multivariable model for predicting the steel to concrete bond after high temperature exposure", Constr. Build. Mater., 249, 118713. https://doi.org/10.1016/j.conbuildmat.2020.118713.
  38. Yang, O., Zhang, B., Yan, G. and Chen, J. (2018), "Bond performance between slightly corroded steel bar and concrete after exposure to high temperature", J. Struct. Eng., 144(11), 04018209. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002217.
  39. Yaqub, M. and Bailey, C.G. (2016), "Non-destructive evaluation of residual compressive strength of post-heated reinforced concrete columns", Constr. Build. Mater., 120, 482-493. https://doi.org/10.1016/j.conbuildmat.2016.05.022.
  40. Yonaba, H., Anctil, F. and Fortin, V. (2010), "Comparing sigmoid transfer functions for neural network multistep ahead streamflow forecasting", J. Hydrol. Eng., 15(4), 275-283. https://doi.org/10.1061/(ASCE)HE.1943-5584.0000188.