참고문헌
- E. Merzari, A. Obabko, P. Fischer, N. Halford, J. Walker, A. Siegel, Y. Yu, Largescale large eddy simulation of nuclear reactor flows: issues and perspectives, Nucl. Eng. Des. 312 (2017a) 86-98. https://doi.org/10.1016/j.nucengdes.2016.09.028
- M. Wang, Q. Zuo, H. Yu, W. Tian, G.H. Su, S. Qiu, Multiscale thermal hydraulic study under the inadvertent safety injection system operation scenario of typical pressurized water reactor, Sci. Technol. Nucl. Ins. (2017) 1-15, 2017.
- B. Koncar, S. Kosmrlj, Simulation of turbulent flow in MATIS-H rod bundle with split-type mixing vanes, Nucl. Eng. Des. 327 (2018) 112-126. https://doi.org/10.1016/j.nucengdes.2017.12.017
- J. Xiong, R. Cheng, C. Lu, X. Chai, X. Liu, X. Cheng, CFD simulation of swirling flow induced by twist vanes in a rod bundle, Nucl. Eng. Des. 338 (2018) 52-62. https://doi.org/10.1016/j.nucengdes.2018.08.003
-
M. Wang, D. Fang, Y. Xiang, Y. Fei, Y. Wang, W. Ren, W. Tian, G.H. Su, S. Qiu, Study on the coolant mixing phenomenon in a
$45^{\circ}$ T junction based on the thermal-mechanical coupling method, Appl. Therm. Eng. 144 (2018) 600-613. https://doi.org/10.1016/j.applthermaleng.2018.08.073 - T. Feng, M. Wang, P. Song, L. Liu, W. Tian, G.H. Su, S. Qiu, Numerical research on thermal mixing characteristics in a 45-degree T-junction for two-phase stratified flow during the emergency core cooling safety injection, Prog. Nucl. Energy 114 (2019) 91-104. https://doi.org/10.1016/j.pnucene.2019.03.009
- J. Chen, D. Zhang, P. Song, X. Wang, S. Wang, Y. Liang, S. Qiu, Y. Zhang, M. Wang, G.H. Su, CFD investigation on thermal-hydraulic behaviors of a wirewrapped fuel subassembly for sodium-cooled fast reactor, Ann. Nucl. Energy 113 (2018) 256-269. https://doi.org/10.1016/j.anucene.2017.11.023
- B.H. Yan, The thermal hydraulic phenomenon in tight lattice bundles: a review, Ann. Nucl. Energy 126 (2019) 330-349. https://doi.org/10.1016/j.anucene.2018.11.037
- S. Tavoularis, Rod bundle vortex networks, gap vortex streets, and gap instability: a nomenclature and some comments on available methodologies, Nucl. Eng. Des. 241 (7) (2011) 2624-2626. https://doi.org/10.1016/j.nucengdes.2011.03.052
- S.V. Moller, On phenomena of turbulent flow through rod bundles, Exp. Therm. Fluid Sci. 4 (1) (1991) 25-35. https://doi.org/10.1016/0894-1777(91)90018-M
- J.D. Hooper, K. Rehme, Large-scale structural effects in developed turbulent flow through closely-spaced rod arrays, J. Fluid Mech. 145 (1) (1984) 305-337. https://doi.org/10.1017/S0022112084002949
- T. Krauss, L. Meyer, Characteristics of turbulent velocity and temperature in a wall channel of a heated rod bundle, Exp. Therm. Fluid Sci. 12 (1) (1996) 75-86. https://doi.org/10.1016/0894-1777(95)00076-3
- T. Krauss, L. Meyer, Experimental investigation of turbulent transport of momentum and energy in a heated rod bundle, Nucl. Eng. Des. 180 (3) (1998) 185-206. https://doi.org/10.1016/S0029-5493(98)00158-7
- M.S. Guellouz, S. Tavoularis, The structure of turbulent flow in a rectangular channel containing a cylindrical rod - Part 1: Reynolds-averaged measurements, Exp. Therm. Fluid Sci. 23 (1) (2000a) 59-73. https://doi.org/10.1016/S0894-1777(00)00038-8
- M.S. Guellouz, S. Tavoularis, The structure of turbulent flow in a rectangular channel containing a cylindrical rod - Part 2: phase-averaged measurements, Exp. Therm. Fluid Sci. 23 (1) (2000b) 75-91. https://doi.org/10.1016/S0894-1777(00)00039-X
- F. Baratto, S.C.C. Bailey, S. Tavoularis, Measurements of frequencies and spatial correlations of coherent structures in rod bundle flows, Nucl. Eng. Des. 236 (17) (2006) 1830-1837. https://doi.org/10.1016/j.nucengdes.2005.12.009
- E. Merzari, H. Ninokata, E. Baglietto, Numerical simulation of flows in tightlattice fuel bundles, Nucl. Eng. Des. 238 (7) (2008) 1703-1719. https://doi.org/10.1016/j.nucengdes.2008.01.001
- B.H. Yan, L. Yu, URANS simulation of the turbulent flow in a tight lattice: effect of the pitch to diameter ratio, Prog. Nucl. Energy 53 (4) (2011) 428-437. https://doi.org/10.1016/j.pnucene.2011.02.009
- Y.Q. Yu, B.H. Yan, X. Cheng, H.Y. Gu, Simulation of turbulent flow inside different subchannels in tight lattice bundle, Ann. Nucl. Energy 38 (11) (2011) 2363-2373. https://doi.org/10.1016/j.anucene.2011.07.018
- J. Wang, W.X. Tian, Y.H. Tian, G.H. Su, S.Z. Qiu, A sub-channel analysis code for advanced lead bismuth fast reactor, Prog. Nucl. Energy 63 (2013) 34-48. https://doi.org/10.1016/j.pnucene.2012.09.010
- H. Jeong, K. Ha, Y. Kwon, Y. Lee, D. Hahn, A dominant geometrical parameter affecting the turbulent mixing rate in rod bundles, Int. J. Heat Mass Tran. 50 (5-6) (2007) 908-918. https://doi.org/10.1016/j.ijheatmasstransfer.2006.08.023
- D.S. Rowe, C.W. Angle, Crossflow mixing between parallel flow channels during boiling, in: Part Ii. Measurement of Flow and Enthalpy in Two Parallel Channels, Pacific Northwest Lab, Richland, Wash, 1967. Battelle-Northwest.
- N. Silin, L. Juanico, Experimental study on the Reynolds number dependence of turbulent mixing in a rod bundle, Nucl. Eng. Des. 236 (18) (2006) 1860-1866. https://doi.org/10.1016/j.nucengdes.2006.02.006
- P. Fischer, J. Lottes, K. S. https://nek5000.mcs.anl.gov/title, 2019.
- M.O. Deville, P.F. Fischer, E.H. Mund, High Order Methods for Incompressible Fluid Flow, Cambridge University Press, 2002.
- G. Busco, E. Merzari, Y.A. Hassan, Invariant analysis of the Reynolds stress tensor for a nuclear fuel assembly with spacer grid and split type vanes, Int. J. Heat Fluid Flow 77 (2019) 144-156. https://doi.org/10.1016/j.ijheatfluidflow.2019.04.006
- N. Goth, P. Jones, D.T. Nguyen, R. Vaghetto, Y.A. Hassan, A. Obabko, E. Merzari, P.F. Fischer, Comparison of experimental and simulation results on interior subchannels of a 61-pin wire-wrapped hexagonal fuel bundle, Nucl. Eng. Des. 338 (2018) 130-136. https://doi.org/10.1016/j.nucengdes.2018.08.002
- J. Martinez, Y. Lan, E. Merzari, M. Min, On the use of LES-based turbulent thermal-stress models for rod bundle simulations, Int. J. Heat Mass Tran. 142 (2019), 118399. https://doi.org/10.1016/j.ijheatmasstransfer.2019.07.049
- Y. Maday, A.T. Patera, E.M. R Nquist, An Operator-integration-factor splitting method for time-dependent problems: application to incompressible fluid flow, J. Sci. Comput. 5 (4) (1990) 263-292. https://doi.org/10.1007/BF01063118
- S. Stolz, P. Schlatter, L. Kleiser, High-pass filtered eddy-viscosity models for large-eddy simulations of transitional and turbulent flow, Phys. Fluids 17 (6) (2005) 65103. https://doi.org/10.1063/1.1923048
- C.Y. Lee, C.H. Shin, W.K. In, Effect of gap width on turbulent mixing of parallel flow in a square channel with a cylindrical rod, Exp. Therm. Fluid Sci. 47 (2013) 98-107. https://doi.org/10.1016/j.expthermflusci.2013.01.005
- H. Ju, M. Wang, C. Chen, X. Zhao, M. Zhao, W. Tian, G.H. Su, S. Qiu, Numerical study on the turbulent mixing in channel with Large Eddy Simulation (LES) using spectral element method, Nucl. Eng. Des. 348 (2019) 169-176. https://doi.org/10.1016/j.nucengdes.2019.04.017
- H. Choi, P. Moin, Grid-point requirements for large eddy simulation: chapman's estimates revisited, Phys. Fluids 24 (1) (2012) 11702. https://doi.org/10.1063/1.3676783