KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Strain Response Analysis of RC Beams Strengthened with Optical Fiber-embedded CFRP Sheet

광섬유 매립 CFRP 쉬트로 보강한 RC 보의 변형률 응답 분석

  • 심원보 (충북대학교 토목공학과) ;
  • 홍기남 (충북대학교 토목공학과) ;
  • 연영모 (충북대학교 토목공학과) ;
  • 정규산 (한국건설기술연구원 노후인프라센터)
  • Received : 2020.03.10
  • Accepted : 2020.05.08
  • Published : 2020.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper reports the results of an experimental study using the BOTDR sensor to detect the unbonded location of attached CFRP sheet for structural rehabilitation. A specimens with the unattached CFRP sheet were fabricated for this study, on which BOTDR sensor was attached with a nylon net. During the flexural test of the specimens, the strain of the CFRP sheet was measured using the BOTDR sensor and electric resistance gauges. From the results, it was confirmed that the strain distribution obtained through the BOTDR sensor can be effectively used to visualize and detect the unbonded position of the CFRP sheet. In addition, In addition, the strain measured by the BOTDR sensor was found to be more effective in analyzing the overall structure behavior than the electric resistance strain gauge. The development of a BOTDR sensor with a measuring longth of less than 100 mm will enable accurate detection of the local unbonded position of the CFRP sheet.

본 논문은 구조물 보강을 위해 부착된 CFRP 쉬트의 박락 위치를 탐색하기 위해 BOTDR 센서를 적용한 실험적 연구 결과를 보고한다. CFRP 쉬트를 부분적으로 비부착한 실험체가 본 연구를 위해 제작되었으며, 그 위에 BOTDR 센서를 나일론 망을 이용하여 부착되었다. 보강된 RC 보의 휨실험 동안 CFRP 쉬트의 변형률은 BOTDR 센서와 전기저항식 게이지를 통해 계측되었다. 연구결과로부터 BOTDR 센서를 통해서 획득된 변형률 분포는 CFRP 보강재의 탈락 구간을 시각화하고, 탐지하는데 효과적으로 이용될 수 있음이 확인되었다. 또한 BOTDR 센서를 통해 계측된 변형률은 국부적인 변형률이 얻어지는 전기저항식 게이지보다 구조물 전체의 거동을 분석하는데 효과적임이 확인되었다. 100 mm 이하의 계측장을 갖는 BOTDR 센서의 개발은 CFRP 쉬트의 국부적인 탈락의 위치의 정확한 탐지를 가능하게 할 것으로 판단된다.

Keywords

References

  1. He, Z. and Hotate, K. (2002). "Distributed fiber-optic stresslocation measurement by arbitrary shaping of optical coherence function." Journal of Lightwave Technology, Vol. 20, No. 9, pp. 1715-1723. https://doi.org/10.1109/JLT.2002.802205
  2. Hong, Y. H. and Lee, H. J. (2007). "Theoretical study of Brillouin OTDA using two pulse lasers." Korean Journal of Optics and Photonics, Vol. 18, No. 3, pp. 196-201 (in Korean). https://doi.org/10.3807/HKH.2007.18.3.196
  3. Horiguchi, T., Kurashima, T. and Tateda, M. (1990). "a technique to measure distributed dtrain in optical fibers." Institute of Electrical and Electronics Engineers (IEEE) Photonics Technology Letters, Vol. 2, No. 5, pp. 352-354.
  4. Hwang, Y. K., Park, K. T. and Yoo, Y. J. (2007). Diagnosis method for reinforcing state of adhesional reinforcing-member including FRP strip or sheet usnig optical fiber cable sensor, Republic of Korea Patent No. 10-0789924, Korean Intellectctual Property Office (Registered).
  5. Kim, B. C., Jung, K. S., Park, J. S. and Park, K. T. (2018). "Brillouin-OTDR strain response analysis of optical fiberembedded carbon fiber sheet." Korean Society for Advanced Composite Structure, Vol. 9, No. 3, pp. 1-8 (in Korean).
  6. Kim, C. Y. (2007). Flexural behavior of RC beam strengthened with prestressed CFRP plates considering bond characteristics, Master Thesis, Department of Civil and Environmental Engineering, Myongji University, Seoul, Korea (in Korean).
  7. Kim, K. S. (2003). "Self diagnosis technique of concrete structure repaired and strengthened by carbon fiber sheets using optical fiber sensors." Journal of the Korean Society for Nondestructive Testing, Vol. 23, No. 2, pp. 133-139 (in Korean).
  8. Kim, Y. H. (2006). Analysis of influencing parameters on strengthening effect of CFRP sheets used to strengthen reinforced concrete beams, Master Thesis, Department of Architectural Engineering, Ewha Womans University, Seoul, Korea (in Korean).
  9. Kim, Y. T. (2002). "Strain measurement and cracks detection of concrete beams using fiber optic sensors." Journal of the Korea Concrete Institute, Vol. 22, No. 2, pp. 221-227 (in Korean).
  10. Lim, D. H. (2013). "An experimental study of flexural strengthening method of reinforced concrete beams with near surface mounted CFRP strips." Journal of the Korean Society of Civil Engineers, KSCE, Vol. 33, No. 1, pp. 131-136 (in Korean). https://doi.org/10.12652/Ksce.2013.33.1.131
  11. Park, H. J., Koo, K. Y., Yi, J. H. and Yun, C. B. (2011). "Development of a damage monitoring technique for jacket-type offshore structures using fiber bragg grating sensors." Journal of the Korean Society of Civil Engineers, KSCE, Vol. 31, No. 6A, pp. 399-408 (in Korean). https://doi.org/10.12652/KSCE.2011.31.6A.399
  12. Seo, M. S. (2006). Distributed optical fiber sensor using spatiallyselective brillouin scattering, Master Thesis, Department of Physics and Technology, Chonbuk National University, Jeonju, Korea (in Korean).