DOI QR코드

DOI QR Code

Groundwater Productivity and Rehabilitation of Radial Collector Wells for Agriculture near Okseong Underground Dam

  • Jeon, Hang-Tak (Department of Geological Sciences, Busan National University) ;
  • Hamm, Se-Yeong (Department of Geological Sciences, Busan National University) ;
  • Hong, Soun-Ouk (Jeongbuk Regional Headquarter, Korea Rural Community Corporation) ;
  • Lee, Sang Yong (Impulse Tech Co., Ltd.) ;
  • Kim, Hyoung-Soo (Department of Renewable Energy, Jungwon University)
  • Received : 2020.08.14
  • Accepted : 2020.08.26
  • Published : 2020.08.31

Abstract

When a radial collector well is installed and operated for agricultural purposes, negative impacts may be observed over time due to the clogging of horizontal arms, such as reduced groundwater discharge and water quality deterioration. When radial collector well No. 2 was rehabilitated using the high-pressure impulse generation technique, the specific capacity and transmissivity were increased by 43.1 and 100.6%, respectively. In contrast, according to air surging, the specific capacity and transmissivity increased by 33.8 and 85.8%, respectively, compared to the initial rate before rehabilitation. During the operation of radial collector wells since construction, the time of well rehabilitation can be effectively determined by continuously monitoring the groundwater level and pumping rate of the radial collector wells, thereby preventing a decrease in productivity.

Keywords

References

  1. Bakker, M., Kelson, V.A., and Luther, K.H., 2005, Multilayer analytic element modeling of radial collector wells, Ground Water, 43, 926-934.
  2. Collins, S.L. and Houben, G.J., 2020, Horizontal and radial collector wells: simple tools for a complex problem, Hydrogeology Journal, 28, 1925-1935. https://doi.org/10.1007/s10040-020-02120-2
  3. Choo, C.-O., Hamm, S.-Y., Lee, J.-H., Lee, C.-M., Choo, Y.-W., Han, S.J., Kim, M.-J., and Cho, H.N., 2012, Characterization and formation mechanisms of clogging materials in groundwater wells, Mt. Geumjeong area, Busan, Korea, The Journal of Engineering Geology, 22(1), 67-81. https://doi.org/10.9720/kseg.2012.22.1.067
  4. Chung, J.-H., Park, J.-H., Park, C.-K., Yang, J.-S., Kim, D.-K., Jeong, K.-C., Choi, Y.-S. and Bu, S.-A., 2004, Calculation of the yield of bank filtration by using the horizontal collector wells, The Journal of Engineering Geology, 14(4), 417-427.
  5. Hamm, S.-Y., Cheong, J.-Y., Ryu, S.M., Kim, M.J. and Kim, H.-S., 2002, Hydrogeological characteristics of bank storage area in Daesan-myeon, Changwon city, Korea, Journal of the Geological Society of Korea, 38(4), 595-610.
  6. Hong, S.-O., Song, S.-H., An, J.-G., and Kim, J.-S., 2016, Agricultural radial collector wells in South Korea and sustainability, The Journal of Engineering Geology, 26(3), 331-337. https://doi.org/10.9720/kseg.2016.3.331
  7. Houben, G. and Treskatis, C., 2007, Water well rehabilitation and reconstruction, McGraw-Hill Companies, Inc., 391p.
  8. Jeon, H.-T., Hamm, S.-Y., Cheong, J.-Y., Han, S.-J., Yun, S.-M., 2019, High-pressure air impulse technique for rehabilitating well and its application to a riverbank filtration site in Korea, Journal of Environmental Science International, 28(10), 887-898. https://doi.org/10.5322/JESI.2019.28.10.887
  9. Kim, S.W., Yoo, H.S. and Woo, Y.K., 1976, Explanatory test of the geological map of gongju sheet, Korea Research Institute of Geoscience and Mineral Resources, 56 p.
  10. Kim, T.-H., Jeong, J.-H., Kim M., Oh, S.-H., and Lee, J.-S., 2014, Analysis of the correlation between geological characteristics and water withdrawals in the laterals of radial collector well, The Journal of Engineering Geology, 24(2), 201-215. https://doi.org/10.9720/kseg.2014.2.201
  11. Lee, E., Hyun, Y., Lee, K.K., Kim, H.S., and Jeong, J.H., 2010, Evaluation of well production by a riverbank filtration facility with radial collector well system in Jeungsan-ri, Changnyeong-gun, Korea, Journal of Soil & Groundwater Environment, 15, 4, 1-12.
  12. Ministry of Agriculture and Forestry, 1997, A study of appropriate post management methods for tube wells, 275 p.
  13. Ministry of Education, Science and Technology, K-water, 2011, Establishment of sustainable groundwater development system and its merchandising, 1054 p.
  14. Ministry of Environment and Pusan National University, 2012, Technology Development for the Detection and Removal of Clogging Materials of Wells, 251 p.
  15. Ministry of Food, Agriculture, Forestry and Fisheries and Korea Rural Community Corporation, 2015, A Study on Increasing Efficiency of Large-scale Groundwater Facilities (I), 199 p.
  16. Moench, A.F., 1985, Transient flow to a large-diameter well in an aquifer with storative semiconfining layers, Water Resources Research, 21(8), 1121-1131. https://doi.org/10.1029/WR021i008p01121
  17. Park, J.Y., Choi, S.M., Kim, J.M., and Kim, G.B., 2015, Evaluation of impacts of arm configurations on performance and efficiency of radial collector wells using a detailed numerical modeling technique, Journal of the Geological Society of Korea, 51, 1, 81-92. https://doi.org/10.14770/jgsk.2015.51.1.81
  18. Subsurface Tech, 2008, www.subsurfacetech.com/aquafreed-case-studies.
  19. Theis, C.V., 1935, The relation between the lowering of the piezometric surface and the rate and duration of discharge of a well using groundwater storage, American Geophysical Union Transactions, 16, 519-524. https://doi.org/10.1029/TR016i002p00519
  20. Van Beek, K., 2012, Cause and prevention of abstraction well clogging: diagnosing potential supply problems, article from $H_2O$ 2012.
  21. Van Beek, C.G.E.M., Breedveld, R.J.M., Huhasz-Holterman, M., Oosterhof, A. and Stuyfzand, P.J., 2009, Cause and prevention of well bore clogging by particles, Hydrogeology Journal, 17, 1877-1886. https://doi.org/10.1007/s10040-009-0537-9
  22. WellJet, 2011, www.welljetbyhpc.com/case-studies/case-study-1.