References
- Smith-Bindman R, Lipson J, Marcus R, et al. Radiation Dose Associated with Common Computed Tomography Examinations and the Associated Lifetime Attributable Risk of Cancer. Arch Intern Med. 2015;169(22):2078-86. https://doi.org/10.1001/archinternmed.2009.427
- Brenner DJ, Hall EJ. Computed tomography-an increasing source of radiation exposure. N Engl J. Med. 2007;357(22):2277-84.
- Goo HW. CT radiation dose optimization and estimation: an update for radiologists. Korean J Radiol. 2012;13(1):1-11. https://doi.org/10.3348/kjr.2012.13.1.1
- Gunn ML, Kohr JR. State of the art: technologies for computed tomography dose reduction. Emerg Radiol. 2010;17(3):209-18. https://doi.org/10.1007/s10140-009-0850-6
- Lee KB, Goo HW. Quantitative Image Quality and Histogram-Based Evaluations of an Iterative Reconstruction Algorithm at Low-to-Ultralow Radiation Dose Levels: A Phantom Study in Chest CT. Korean J Radiol. 2018;19(1):119-29. https://doi.org/10.3348/kjr.2018.19.1.119
- Lee KB, Lee WH, Lee JH, et al. Dose reduction and image quality assessment in MDCT using AEC (D-DOM& Z-DOM) and In-plane Bismuth shielding. Radiat Prot Dosimetry. 2010;141(2):162-7. https://doi.org/10.1093/rpd/ncq159
- Choi MH, Jang JS, Lee KB. A Study on the Indirect Radiation Exposure of the Medical Personnel Who is Responsible for Patient Safety in CT Examination. Journal of Radiological Science and Technology. 2019;42(2):105-11.
- Lechel U, Becker C, Langenfeld-jager G, et al. Dose reduction by automatic exposure control in multidetector computed tomography: comparison between measurement and calculation. Eur Radiology. 2009;19(4):1027-34. https://doi.org/10.1007/s00330-008-1204-6
- Kong HG, Lee KB. Radiation Dose Comparison according to Different Organ Characteristics at Same Scan Parameters Using CareDose 4D: An Adult and Pediatric Phantom Evaluation. Journal of Radiological Science and Technology. 2019;42(4):271-7.
- Ministry of Health and Welfare. Rules for the installation and operation of special medical equipment. Ministry of Health and Welfare law. 2015;339.
- Lee KB, Cho YB, Jeong HK, et al. The study on quantitative assessment method of CT image in quality control: focusing on spatial and low contrast resolution. Journal of the institute of electronics and information engineers. 2017;54(12):186-94. https://doi.org/10.5573/ieie.2017.54.12.186
- Lawrence EM. Frontiers of 3D Printing/Additive Manufacturing: from Human Organs to Aircraft Fabrication. J Mater Sci Technol. 2016;32:987-95. https://doi.org/10.1016/j.jmst.2016.08.011
- Park SH, Park JH, Lee HJ, Lee NK. Current Status of Biomedical Applications using 3D Printing Technology. Korean Society for Precision Engineering. 2014;31(12):1067-76.
- Kim SH, Yoon JS, Yoo SK. Optimization Research of 3D Printer Associated with Properties of Photocurable Resins for Ocular Prosthesis Producing. J Biomed Eng Res. 2019;40(2):55-61. https://doi.org/10.9718/JBER.2019.40.2.55
- He Y, Xue GH, Fu JZ. Fabrication of low cost soft tissue prostheses with the desktop 3D printer. Sci Rep. 2015;4:6973. https://doi.org/10.1038/srep06973
- Yoon MS, Hong SM, Heo YC, Han DK. A Study on the Fabrication and Comparison of the Phantom for Computed Tomography Image Quality Measurements Using Three-Dimensions Printing Technology. Journal of Radiological Science and Technology. 2018;41(6):595-602.
- Kalra MK, Maher MM, Togh TL. Techniques and applications of automatic tube current modulation for CT. Radiology. 2004;233(3):649-57. https://doi.org/10.1148/radiol.2333031150
- Lee GB, Kim JH. The Effect of Radiation Dose and Image Quality using AEC (Automatic Exposure Control) with Inappropriate Scout images: A Chest Phantom Experiment with Two Different AEC Modes. Journal of Korean Society of Computed Tomographic Technology. 2016;18(1):47-56.
- Kalra MK, Dang P, Singh S. In-Plane Shielding for CT: Effect of Off-Centering, Automatic Exposure Control and Shield-to- Surface Distance. Korean J Radiol. 2009;10(2):156-63. https://doi.org/10.3348/kjr.2009.10.2.156