로봇학회논문지 (The Journal of Korea Robotics Society)

  • 제15권3호
  • /
  • Pages.212-220
  • /
  • 2020
  • /
  • 1975-6291(pISSN)
  • /
  • 2287-3961(eISSN)
한국로봇학회 (Korea Robotics Society)
권호 표지
DOI QR코드

DOI QR Code

와이어로 구동하는 적층형 다관절 구조를 지닌 수술 로봇의 구동 속도를 고려한 기구학적 제어기의 게인 최적화

Gain Optimization of Kinematic Control for Wire-driven Surgical Robot with Layered Joint Structure Considering Actuation Velocity Bound

  • Jin, Sangrok (College of Medicine, The Catholic University of Korea) ;
  • Han, Seokyoung (School of Mechanical Engineering, Pusan National University)
  • 투고 : 2020.02.17
  • 심사 : 2020.06.03
  • 발행 : 2020.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper deals with a strategy of gain optimization for the kinematic control algorithm of a wire-driven surgical robot. The proposed controller consists of the closed-loop inverse kinematics with the back-calculation method. The closed-loop inverse kinematics has 18 PID control gains, and the back-calculation method has 6 gains. An efficient strategy is designed to optimize 18 values first and then the remaining 6 values. The optimal gain sets are searched under the step input with performance indices. In this gain optimization, the objective function is defined as the minimum value of signal-to-noise ratio of the performance indices for 6 DoF (Degree-of-Freedom) motion that is based on the Taguchi method, and the constraints are applied to obtain stable responses for each motion evenly. The gain sets obtained are verified by simulations using the test trajectories. In comparative results, the optimal gain value based on the performance index combined with ISE (integral of square error) and settling time showed the best control performance.

키워드

참고문헌

  1. C. Bergeles and G.-Z. Yang, "From passive tool holders to microsurgeons: safer, smaller, smarter surgical robots," IEEE Transactions on Biomedical Engineering, vol. 61, no. 5, pp. 1565-1576, May, 2014, DOI: 10.1109/TBME.2013.2293815.
  2. H.-S. Yoon and B.-J. Yi, "Development of a 4-DOF Continuum Robot Using a Spring Backbone," Journal of Korea Robotics Society, vol. 3, no. 4, pp. 323-330, Dec., 2008, [Online], http://www.jkros.org/journal/article.php?code=1986.
  3. F. Jelínek, E. A. Arkenbout, P. W. J. Henselmans, R. Pessers, and P. Breedveld, "Classification of joints used in steerable instruments for minimally invasive surgery-a review of the state of the art," Journal of Medical Devices, vol. 9, no. 1, 2015, DOI: 10.1115/1.4028649.
  4. R .J. Webster and B. A. Jones, "Design and kinematic modeling of constant curvature continuum robots: a review," The International Journal of Robotics Research, vol. 29, no. 13, pp. 1661-1683, 2010, DOI: 10.1177/0278364910368147.
  5. P. Berthet-Rayne, K. Leibrandt, G. Gras, P. Fraisse, A. Crosnier, and G.-Z. Yang, "Inverse kinematics control methods for redundant snake-like robot teleoperation during minimally invasive surgery," IEEE Robotics and Automation Letters, vol. 3, no. 3, pp.2501-2508, July, 2018, DOI: 10.1109/LRA.2018.2812907.
  6. S. Jin, S. K. Lee, J. Lee, and S. Han, "Kinematic Model and Real-Time Path Generator for a Wire-Driven Surgical Robot Arm with Articulated Joint Structure," Applied Sciences, vol. 9, no. 19, pp. 4114, 2019, DOI: 10.3390/app9194114.
  7. M. W. Spong, S. Hutchinson, and M. Vidyasagar, "VELOCITY KINEMATICS-THE MANIPULATOR JACOBIAN," Robot Modeling and Control, 1st ed., John Wiley & Sons Inc., 2006, ch. 4, pp. 113-130, [Online], https://www.wiley.com/en-us/Robot+Modeling+and+Control-p-9780471649908.
  8. P. Falco and C. Natale, "On the stability of closed-loop inverse kinematics algorithms for redundant robots," IEEE Transactions on Robotics, vol. 27, no. 4, pp. 780-784, 2011, DOI: 10.1109/TRO.2011.2135210.
  9. A. Colome and C. Torras, "Closed-loop inverse kinematics for redundant robots: comparative assessment and two enhancements," IEEE/ASME Transactions on Mechatronics, vol. 20, no. 2, pp. 944-955, 2015, DOI: 10.1109/TMECH.2014.2326304.
  10. J. Bak, J. Kim, T. W. Seo, and S. Jin, "Gain Optimization of a Controller with Decomposition of Thrust Force and Actuation Limit Algorithm for a Tilted Thrusting Underwater Robot," Journal of the Korean Society for Precision Engineering, vol. 36, no. 11, pp. 1025-1031, 2019, DOI: 10.7736/KSPE.2019.36.11.1025.
  11. Stanley M. Shinners, "Performance Criteria," Modern Control System Theory and Design, 2nd ed., John Wiley & Sons Inc., 1998, ch. 5, sec. 5.6, pp. 290-292, [Online], https://www.wiley.com/en-us/Modern+Control+System+Theory+and+Design%2C+2nd+Edition-p-9780471249061.
  12. G. S. Peace, "ANALYSIS: SMALLER-THE-BETTER," Taguchi Methods: A Hands-on Approach, Addison-Wesley, 1993, ch.17, pp. 273-291, [Online], https://books.google.co.kr/books/about/Taguchi_methods.html?id=ZeBTAAAAMAAJ&redir_esc=y.