DOI QR코드

DOI QR Code

A Study on the Improvement of Abnormal Lighting of Supersonic Aircraft Navigation Light

초음속 항공기 항법등의 이상점등 개선에 관한 연구

  • Received : 2020.05.12
  • Accepted : 2020.08.07
  • Published : 2020.08.31

Abstract

Navigation lights used in supersonic aircraft are used to identify the direction and location of the aircraft. The color of the navigation lights and location of installation are defined by aviation law as red for the left wing, green for the right wing, and white for the tail. Navigation lights operate in BRT and DIM modes. BRT is the brightest mode, and DIM is an output with dimmed brightness. Navigation lights serve to prevent aircraft collisions and are very important for stability and location identification. One phenomenon is that the inlet and tail navigation lights flicker abnormally. In this study, fault tree analysis was performed in two stages. The first step was derived from three causal factors, the second step developed five improvements, and the optimal improvement plan was drawn. The navigation lights confirmed that the initial input power was unstable as the main cause of abnormal flickering. As an improved method, the circuit was adjusted to stabilize the initial power, and it was confirmed that flickering did not occur as a result of the tests under the same conditions.

초음속 항공기에 사용되는 항법등은 항공기의 비행 방향을 알림과 동시에 야간 조명이 없는 상태에서 지상 이동 및 주기 시 항공기의 위치를 식별하기 위해 사용된다. 항법등의 색상 및 장착 위치는 항공법에 따라 좌측 날개는 적색, 우측 날개는 녹색, 미익에는 백색으로 규정되어 있다. 초음속 항공기에 장착되는 항법등은 2가지 동작모드로 작동되며, 하나는 최대 밝기를 출력하는 BRT 모드, 다른 하나는 밝기를 감광하여 출력하는 DIM 모드이다. 항법등은 불빛을 통해 항공기 충돌 방지 역할을 하며, 비행 안전성 및 위치 식별을 위해 매우 중요한 요소이다. 본 연구에서는 초음속 항공기 운용 중 엔진 흡입구 측면과 미익에 장착된 항법등의 비정상 깜박거림 현상을 개선하기 위해 결함 트리 분석 기법을 통해 2단계로 구조화 하여 분석하였으며, 첫 번째 단계에서는 원인요소 3가지, 두 번째 단계에서는 개선안 5가지를 도출하였으며, 이를 통해 항법등의 깜박거림 현상에 대한 최적의 개선 방안을 도출하였다. 원인 분석 결과 초음속 항공기에 사용되는 항법등의 초기 입력 전원이 불안정한 것이 비정상 깜박거림의 주된 원인으로 확인되었다. 개선 방안으로 초기 입력 전원을 안정화시키기 위해 입력단 회로를 조정하였으며, 개선 방안에 대한 타당성을 지상시험 및 항공기 장착시험으로 입증하였다.

Keywords

References

  1. M. K Kim, J. P. Kim, Y. S. Son, J. Y. Jang, J. J. Kim, Practical Aerial Warfare written from T-50 Aircraft Development Experience, Chung Moon Gak, p. 128-152
  2. Robert L, Boylestad, Louis Nashelsky, Electronic device and circuit theory, Heungryong Science Press, p. 46-53
  3. I. S. Chung, "Fault Tree Analysis based on State-Transition Model", The Journal of the Korea Contents Association , Vol.11, No.10, p.49-58, Oct. 2011. DOI: http://dx.doi.org/10.5392/JKCA.2011.11.10.049
  4. Mark I. Montrose, "EMC and the Printed Circuit Board: Design, Theory, and Layout Made Simple", Jinhan M&B, p. 361-366
  5. Mark I. Montrose, "EMC and the Printed Circuit Board: Design, Theory, and Layout Made Simple", Jinhan M&B, p. 318-327
  6. S. I. Jung, "PCB design technology", Jinhan M&B, p. 156-173
  7. E. H. Song, K. B. Lee, W. S. Na, "The Shielding Effectiveness Analysis of Power Cables Has Coaxial Structure Using Inductive Coupling Test", The 46th KIEE Summer Conference 2015, The Korean Institute of Electrical Engineers, p. 1277-1278, 2015.07
  8. Il-Hwan Seol, Kyu-Hyoung Choi, "Screening Effects of Double-track Electric Railway and Shielded Cables on Communication-Line Inductive Interference", Journal of the Korea Academia-Industrial cooperation Society , Vol.14, No.10, p.5148-5155, 2013. DOI: http://dx.doi.org/10.5762/KAIS.2013.14.10.5148