DOI QR코드

DOI QR Code

조립된 가설기자재 안전인증제도 도입의 타당성 분석

Feasibility Analysis for the Introduction of Safety Certification System for Assembled Temporary Equipment and Materials

  • 정성춘 (안전보건공단 산업안전보건연구원) ;
  • 권준혁 (안전보건공단 산업안전보건인증원) ;
  • 원정훈 (충북대학교 안전공학과) ;
  • 권용준 (안전보건공단 산업안전보건연구원)
  • Jeong, Seong Choon (Occupational Safety and Health Research Institute, Korea Occupational Safety and Health Agency) ;
  • Kwon, Jun Hyuk (Occupational Safety and Health Certification Institute, Korea Occupational Safety and Health Agency) ;
  • Won, Jeong Hun (Department of Safety Engineering, Chungbuk National University) ;
  • Kwon, Yong Jun (Occupational Safety and Health Research Institute, Korea Occupational Safety and Health Agency)
  • 투고 : 2020.03.17
  • 심사 : 2020.05.29
  • 발행 : 2020.06.30

초록

In this study, in order to secure the necessity of introducing the safety certification system for the assembled temporary equipment and materials, the feasibility of the introduction was analyzed through literature review, structural analysis, and actual experiments and surveys related to the assembled temporary equipment and materials. In the previous studies, it was found that the research on the assembled temporary equipment and materials was insufficient, and it was possible to grasp the necessity of introducing the safety certification system for the assembled temporary equipment and materials. In addition, in the results of the serious accident analysis, it was found that the soundness of the temporary equipment and materials is determined by the structural characteristics after it was assembled. As a result of the feasibility analysis of the introduction of the safety certification of the assembled temporary equipment and materials through structural analysis, it is possible to effectively and rationally reflect the main geometrical influence factors, and to introduce the safety certification system that can test the procedures and procedures of the assembled temporary equipment and materials and based on it. It was found that there is a need. As a result of feasibility analysis on the necessity of introducing the safety certification system for assembled temporary equipment and materials through actual experiments, the existing single member performance evaluation has limitations in evaluating the structural performance of the assembled temporary equipment and materials. It was found that there is a need to introduce a safety certification system. As a result of gathering opinions on the feasibility of introducing the safety certification system for assembled temporary equipment and materials of manufacturers and users through the survey, it was found that the overall positive response result was high and the effectiveness was high.

키워드

참고문헌

  1. Ministry of Employment and Labor (MOEL), Ministry of Employment and Labor Notice No. 2020-33 "Safety Certification Notice for Protection Systems)", 2020.
  2. Ministry of Employment and Labor (MOEL), Ministry of Employment and Labor Notice No. 2020-40 "Notice on the Process of Reporting Safety Certification and Voluntary Safety Confirmation(Ministry of Employment and Labor Notice", 2020.
  3. Ministry of Employment and Labor (MOEL), Occupational Safety and Health Act, Article 83 (Safety Certification Criteria), Article 84 (Safety Certification), 2019.
  4. Korea Occupational Safety and Health Agency (KOSHA), Occupational Safety and Health Research Institute, "A Study on Measures to Ensure Safety of the Temporary Equipment and Materials", 2015.
  5. Korea Occupational Safety and Health Agency (KOSHA), Occupational Safety and Health Research Institute, "A Feasibility Study of Safety Certification for Finished Product of Fabricated Temporary Equipment", 2013.
  6. American National Standards Institute(ANSI), "Standards for Testing and Rating Scaffold Assemblies and Components", 2002.
  7. British Standards Institution(BSI), "Temporary Works Equipments-Part 3 Load Testing(BS EN 12811-3)", 2002.
  8. Scaffolding and Construction Equipment Association of Japan, "http://www.kasetsu.or.jp/system/system02/", 2020.
  9. Korea Occupational Safety and Health Agency (KOSHA), "Construction Serious Accident Invetigation", 2008-2017.
  10. K. M. Woo and H. K. Lee, "A Study on the Improvement and Application of Performance Testing of Temporary Equipment and Materials", Vol. 3, No. 1, pp. 74-82, 2002.
  11. C. W. Bae and H. K. Lee, "A Study on the Improvement and Application of Performance Testing of Temporary Equipment and Materials", Journal of the Architectural Institute of Korea, Vol. 18, No. 7, pp. 131-138, 2002.
  12. J. S. Lee and J. W. Choi, "A Feasibility Study of Safety Certification for Finished Product of Fabricated Temporary Equipment", Korea Safety Management & Science Association, An Autumn Conference, Vol. 16, pp. 39-48, 2013.
  13. B. H. Won, K. W. Yoon and S. S. Jeon, "Survey and Improvement Scheme for Safety Certification System of Temporary Equipment and Materials", Journal of the Korea Academia-Industrial Cooperation Society, Vol. 17, No. 7, pp. 92-102, 2016.
  14. D. W. Kim, J. H. Won and Y. K. Park, "A Study on the Improvement of Safety Certification Marks Displayed on the surface of Temporary Equipments at Construction Site (I)", J. Korean Soc. Saf., Vol. 32, No. 4, pp. 59-65, 2017. https://doi.org/10.14346/JKOSOS.2017.32.4.59
  15. H. D. Lee, "Effects of Bracing Member and Number of Stories on the Ultimate Behavior of System Supports" Chungbuk National University Graduate School, Doctor's Thesis, 2019.
  16. J. K. Bong, "Flexural Moment Strength and Rotational Stiffness Assessment of Wedge Type Connection between Vertical and Horizontal Members of System Supports", Chungbuk National University Graduate School, Doctor's Thesis, 2018.
  17. J. S. Lee, Y. S. Lee and T. K. Oh, "Effect of Horizontal Connection and Slope on Buckling Characteristics of Single Pipe", J. Korean Soc. Saf., Vol. 30, No. 2, pp. 48-55, 2015. https://doi.org/10.14346/JKOSOS.2015.30.2.48
  18. J. O. Kang, Y. S. Kang and M. S. Lee, "Brief Review on Stability Issues for Slab System Support", Journal of the Korea Institute for Structural Maintenance Inspection, Vol. 9, No. 2, pp. 57-61, 2005.
  19. M. S. Park, Y. J. Jang, J. H. Lee, S. H. Lee, K. J. Sin and H. J. Kim, "Experimental Study on Buckling Behavior of Scaffolding", Journal of Korean Society of Steel Construction, Journal of Academic Presentation Conference, 2009.
  20. Korea Occupational Safety and Health Agency (KOSHA), Occupational Safety and Health Research Institute (OSHRI), "A Study on the Certification System and Standard of Fabricated Temporary Equipment and Materials", 2018.