DOI QR코드

DOI QR Code

Analytical and experimental fatigue analysis of wind turbine tower connection bolts

  • 투고 : 2020.07.20
  • 심사 : 2020.05.28
  • 발행 : 2020.07.25

초록

This paper presents a method of estimation of fatigue demands on connection bolts of tubular steel wind turbine towers. The presented method relies on numerical simulation of aerodynamic loads and structural behavior of bolted connections modeled using finite element method. Variability of wind parameters is represented by a set of values derived from their probability densities, which are adjusted based on field measurements. Numerically generated stress time-series show agreement with the measurements from strain gauges inside bolts, in terms of power spectra and the resulting damage. Position of each bolt has a determining effect on its fatigue damage. The proposed framework for fatigue life estimation represents the complexities in loading and local behavior of the structure. On the other hand, the developed procedure is computationally efficient since it requires a limited number of simulations for statistically representing the wind variations.

키워드

과제정보

Authors acknowledge the financial funding of TUBITAK with the grant number of 215M805 and they are also thankful to Assoc. Prof. Emre Otay and Mr. Soner Melih Kural for sharing the SCADA data.

참고문헌

  1. ABAQUS (1998), "User's Manual, Hibbitt, Karlsson, and Sorensen, Inc., Providence, RI, U.S.A.
  2. Ahmed, A., Ahmad, S.P. and Reshi, J.A. (2013), "Bayesian analysis of Rayleigh distribution", Int. J. Sci. Res. Publications, 3(10), 1-9.
  3. ASTM (American Society for Testing and Materials) (1997), "Standard practices for cycle counting in fatigue analysis", ASTM E1049-85 (Reapproved 2011), ASTM Int., West Conshohocken, U.S.A.
  4. Benedetti, M., Fontanari, V. and Battisti, L. (2013), "Structural health monitoring of wind towers: residual fatigue life estimation", Smart. Mater. Struct., 22(4), 045017. https://doi.org/10.1088/0964-1726/22/4/045017.
  5. Blachowski, B. and Gutkowski, W. (2016), "Effect of damaged circular flange-bolted connections on behaviour of tall towers, modelled by multilevel substructuring", Eng. Struct., 111, 93-103. https://doi.org/10.1016/j.engstruct.2015.12.018.
  6. Chou, J.S. and Tu, W.T. (2011), "Failure analysis and risk management of a collapsed large wind turbine tower", Eng. Fail. Anal., 18(1), 295-313. https://doi.org/10.1016/j.engfailanal.2010.09.008
  7. DNVGL (Det Norske Veritas Germanischer Lloyd) (2016a), "Fatigue design of offshore steel structures",, Oslo, Norway.
  8. DNVGL (Det Norske Veritas Germanischer Lloyd) (2016b), "Support structures for wind turbines", Oslo, Norway.
  9. Do, T.Q., van de Lindt, J.W. and Mahmoud, H. (2014a), "Fatigue life fragilities and performance-based design of wind turbine tower base connections", J. Struct. Eng., 141(7), 04014183. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001150.
  10. Do, T.Q., Mahmoud, H. and van de Lindt, J.W. (2014b), "Fatigue life of wind turbine tower bases throughout Colorado", J. Perform. Constr. Fac., 29(4), 04014109. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000612.
  11. Elshaer, A., Bitsuamlak, G. and Abdallah, H. (2019), "Variation in wind load and flow of a low-rise building during progressive damage scenario", Wind Struct., 28(6), 389-404. https://doi.org/10.12989/was.2019.28.6.389.
  12. Eurocode (2005a), "Design of steel structures - Part 1-1: General rules and rules for buildings", European Committee for Standardization, Brussels, Belgium.
  13. Eurocode (2005b), "Design of steel structures - Part 1-9: Fatigue", European Committee for Standardization, Brussels, Belgium.
  14. GL (Germanischer Lloyd) (2010), "Guideline for the certification of wind turbines",
  15. Gol-Zaroudi, H. and Aly, A.M. (2017), "Open-jet boundary-layer processes for aerodynamic testing of low-rise buildings", Wind Struct., 25(3). https://doi.org/10.12989/was.2017.25.3.233
  16. Gunter, W.S., Schroeder, J.L., Weiss, C.C. and Bruning, E.C. (2017), "Surface measurements of the 5 June 2013 damaging thunderstorm wind event near Pep, Texas", Wind Struct., 24(2), 185-204. https://doi.org/10.12989/was.2017.24.2.185.
  17. Hanbay, S. (2019), "Vibration-based structural health monitoring of a wind turbine incorporating environmental and operational conditions", Master's Thesis, Bogazici University, Istanbul, Turkey.
  18. Heistermann, C., Husson, W. and Veljkovic, M. (2009), "Flange connection vs. friction connection in towers for wind turbines", Proceedings of Nordic steel and construction conference, Stockholm, Sweden, September.
  19. Hamdi, H. and Farah, K. (2018), "Beam finite element model of a vibrate wind blade in large elastic deformation.", Wind Struct., 26(1), 25-34. https://doi.org/10.12989/was.2018.26.1.025
  20. Huang, W. and Zhang, X. (2019), "Wind field simulation over complex terrain under different inflow wind directions", Wind Struct., 28(4), 239-253. https://doi.org/10.12989/was.2019.28.4.239
  21. IEC (International Electrotechnical Commission) (2005), "Wind turbines part 1: Design requirements." International Electrotechnical Commission.
  22. Ilhan, A., Bilgili, M. and Sahin, B. (2018), "Analysis of aerodynamic characteristics of 2 MW horizontal axis large wind turbine.", Wind Struct., 27(3), 187-197. https://doi.org/10.12989/was.2018.27.3.187
  23. Jonkman, J.M. and Buhl Jr, M.L. (2005), "FAST user's guide", National Renewable Energy Laboratory, Golden, CO, Technical Report No. NREL/EL-500-38230.
  24. Jonkman, B.J. and Klicher, L. (2012), "TurbSim user's guide: Version 1.06", National Renewable Energy Laboratory.
  25. Ke, S., Yu, W., Wang, T., Zhao, L. and Ge, Y. (2016), "Wind loads and load-effects of large scale wind turbine tower with different halt positions of blade", Wind Struct., 23(6), 559-575. http://dx.doi.org/10.12989/was.2016.23.6.559.
  26. Lu, C.L., Li, Q.S., Huang, S.H., Tuan, A.Y., Zhi, L.H. and Su, S. C. (2016), "Evaluation of wind loads and wind induced responses of a super-tall building by large eddy simulation", Wind Struct., 23(4), 313-350. http://dx.doi.org/10.12989/was.2016.23.4.313.
  27. Mao, W. and Zhou, Z. (2017), "Ground effects on wind-induced responses of a closed box girder", Wind Struct., 25(4), 397-413. https://doi.org/10.12989/was.2017.25.4.397
  28. Mirfazli, S.K., Giahi, M.H. and Dehkordi, A.J. (2019), "Numerical optimization of a vertical axis wind turbine: case study at TMU campus", Wind Struct., 28(3), 191-201. https://doi.org/10.12989/was.2019.28.3.191.
  29. Nowak, A.S. and Collins, K.R. (2000), "Reliability of Structures", McGraw Hill, U.S.A.
  30. Oechsner, M., Beyer, J., Simonsen, F., Schaumann, P. and Eichstadt, R. (2015), "Experimental and Analytical Assessment of the Fatigue Strength of Bolts with Large Dimensions under Consideration of Boundary Layer Effects.", Proceedings of 2nd European Steel Technology and Application Days, Dusseldorf, Germany.
  31. Pavlovic, M., Heistermann, C., Veljkovic, M., Pak, D., Feldmann, M., Rebelo, C. and da Silva, L.S. (2015), "Friction connection vs. ring flange connection in steel towers for wind converters", Eng. Struct., 98, 151-162. https://doi.org/10.1016/j.engstruct.2015.04.026.
  32. Pedersen, N.L. and Pedersen, P. (2008a), "Stiffness analysis and improvement of bolt-plate contact assemblies", Mech. Based Des. Struc., 36(1), 47-66. https://doi.org/10.1080/15397730701735749.
  33. Pedersen, N.L. and Pedersen, P. (2008b), "On prestress stiffness analysis of bolt-plate contact assemblies", Arch. Appl. Mech., 78(2), 75-88. https://doi.org/10.1007/s00419-007-0142-0.
  34. Pollino, M.C. and Huckelbridge, A.A. (2012), "In-situ measurements of fatigue demands on a wind turbine support structure", Proceedings of Energytech, IEEE, Cleveland, U.S.A., May. https://doi.org/10.1109/EnergyTech.2012.6304680.
  35. Robinson, C., Paramasivam, E., Taylor, E., Morrison, A. and Sanderson, E. (2013), "Study and development of a methodology for the estimation of the risk and harm to persons from wind turbines", Health and Safety Executive, U.K.
  36. Schaumann, P. and Eichstadt, R. (2015), "Fatigue assessment of high-strength bolts with very large diameters in substructures for offshore wind turbines", Proceedings of The Twenty-fifth International Ocean and Polar Engineering Conference, International Society of Offshore and Polar Engineers, Kona, Hawaii, U.S.A, June.
  37. Seidel, M. and Schaumann, P. (2001), "Measuring fatigue loads of bolts in ring flange connections", Proceedings of European conference, Wind Energy, Copenhagen, Denmark.
  38. Shirani, M. and Harkegard, G. (2011a), "Fatigue life distribution and size effect in ductile cast iron for wind turbine components", Eng. Fail. Anal., 18(1), 12-24. https://doi.org/10.1016/j.engfailanal.2010.07.001.
  39. Shirani, M. and Harkegard, G. (2011b), "Large scale axial fatigue testing of ductile cast iron for heavy section wind turbine components", Eng. Fail. Anal., 18(6), 1496-1510. https://doi.org/10.1016/j.engfailanal.2011.05.005.
  40. SHK (Statens haverikommission) (2017), "Accident with a wind turbine in Lemnhult, Vetlanda municipality, Jonkoping County, December 24, 2015", Report Number: RO 2017:01, Diary Number: O-08/15, Swedish Accident Investigation Authority, Stockholm, Sweden. http://www.havkom.se/utredningar/vaegtrafik-oevrigt/olyckamed-vindkraftverk-i-lemnhult
  41. Van-Long, H., Jean-Pierre, J. and Jean-François, D. (2013), "Behaviour of bolted flange joints in tubular structures under monotonic, repeated and fatigue loadings I: Experimental tests", J. Constr. Steel Res., 85, 1-11. https://doi.org/10.1016/j.jcsr.2013.02.011.
  42. Williams, J.G., Anley, R.E., Nash, D.H. and Gray, T.G.F. (2009), "Analysis of externally loaded bolted joints: Analytical, computational and experimental study", Int. J. Pres. Ves. Pip., 86(7), 420-427. https://doi.org/10.1016/j.ijpvp.2009.01.006.