DOI QR코드

DOI QR Code

Experimental compressive behavior of novel composite wall with different width-to-thickness ratios

  • Qin, Ying (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Chen, Xin (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Zhu, Xing-Yu (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Xi, Wang (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Chen, Yuan-Ze (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University)
  • Received : 2019.11.16
  • Accepted : 2020.07.07
  • Published : 2020.07.25

Abstract

Double skin composite wall system owns several structural merits in terms of high load-carrying capacity, large axial stiffness, and favorable ductility. A recently proposed form of truss connector was used to bond the steel plates to the concrete core to achieve good composite action. The structural behavior of rectangular high walls under compression and T-shaped high walls under eccentric compression has been investigated by the authors. Furthermore, the influences of the truss spacings, the wall width, and the faceplate thickness have been previously studied by the authors on short walls under uniform compression. This paper experimentally investigated the effect of width-to-thickness ratio on the compressive behavior of short walls. Compressive tests were conducted on three short specimens with different width-to-thickness ratios. Based on the test results, it is found that the composite wall shows high compressive resistance and good ductility. The walls fail by local buckling of steel plates and crushing of concrete core. It is also observed that width-to-thickness ratio has great influence on the compressive resistance, initial stiffness, and strain distribution across the section. Finally, the test results are compared with the predictions by modern codes.

Keywords

Acknowledgement

This work is sponsored by the Natural Science Foundation of Jiangsu Province (Grant No. BK20170685), and the National Key Research and Development Program of China (Grant No. 2017YFC0703802). The authors would like to thank the Zhejiang Southeast Space Frame Group Company Limited for the supply of test specimens.

References

  1. AISC 360-16 (2016), Specification for structural steel buildings, American Institute of Steel Construction, Chicago, USA.
  2. Asgarian, B., Khazaee, H. and Mirtaheri, M. (2012), "Performance evaluation of different types of steel moment resisting frames subjected to strong ground motion through Incremental dynamic analysis", Int. J. Steel Struct., 12(3), 363-379. http://dx.doi.org/10.1007/s13296-012-3006-6.
  3. Beiraghi, H. (2018), "Energy demands in reinforced concrete wall piers coupled by buckling restrained braces subjected to near-fault earthquake", Steel Compos. Struct., 27(6), 703-716. http://dx.doi.org/10.12989/scs.2018.27.6.703.
  4. Bruhl J.C. and Varma, A.H. (2017), "Experimental resistance and available ductility of steel-plate composite walls in one-way bending", J. Struct. Eng., 143(4), 04016222. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0001714.
  5. CECS 159 (2004), Technical specification for structures with concrete-filled rectangular steel tube members; China Association for Engineering Construction Standardization, Beijing, China.
  6. Chen, L., Mahmoud, H., Tong, S.M. and Zhou, Y. (2015), "Seismic behavior of double steel plate-HSC composite walls", Eng. Struct., 102, 1-12. http://dx.doi.org/10.1016/j.engstruct.2015.08.017.
  7. Chen, L.H., Wang, S.Y., Lou, Y. and Xia, D.R. (2019), "Seismic behavior of double-skin composite wall with L-shaped and C-shaped connectors", J. Constr. Steel Res., 160, 255-270. https://doi.org/10.1016/j.jcsr.2019.05.033.
  8. Choi, B.J., Kang, C.K. and Park, H.Y. (2016), "Strength and behavior of steel plate-concrete wall structures using ordinary and eco-oriented cement concrete under axial compression", Thin Wall. Struct., 84, 313-324. http://dx.doi.org/10.1016/j.tws.2014.07.008.
  9. Curkovic, I., Skejic, D. and Dzeba, I. (2019), "Seismic performance of steel plate shear walls with variable column flexural stiffness", Steel Compos. Struct., Int. J., 33(1), 833-850. http://dx.doi.org/10.12989/scs.2019.33.1.833.
  10. Dan, D., Fabian, A. and Stoian, V. (2011), "Nonlinear behavior of composite shear walls with vertical steel encased profiles", Eng. Struct., 33(10), 2794-2804. http://dx.doi.org/10.1016/j.engstruct.2011.06.004.
  11. Deng, E.F., Zong, L. and Ding, Y. (2019), "Numerical and analytical study on initial stiffness of corrugated steel plate shear walls in modular construction", Steel Compos. Struct., 32(3), 347-359. http://dx.doi.org/10.12989/scs.2019.32.3.347.
  12. EN 1994-1-1 (2004), Eurocode 4: Design of composite steel and concrete structures-Part 1-1: General rules and rules for buildings, European Standard Institute, Brusels, Belgium.
  13. Eom, T.S., Park, H.G., Lee, C.H., Kim, J.H. and Chang, I.H. (2009), "Behavior of double skin composite wall subjected to in-plane cyclic loading", J. Struct. Eng., 135(10), 1239-1249. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0000057.
  14. Gheidi, M., Mirtaheri, M., Zandi, A.P. and Alanjari, P. (2011), "Effect of filler material on local and global behaviour of buckling-restrained braces", Struct. Des. Tall Spec. Build., 20(6), 700-710. https://doi.org/10.1002/tal.555.
  15. GB50010-2010 (2010), Code for design of concrete structures; China Architecture & Building Press, Beijing, China.
  16. GB/T 228.1-2010 (2010), Metallic materials-tensile testing-part 1: method of test at room temperature, China Standards Press, Beijing, China.
  17. GB/T 2975-2018 (2018), Steel and steel products-location and preparation of samples and test pieces for mechanical testing, China Standards Press, Beijing, China.
  18. GB/T 50081-2002 (2002), Standard for test method of mechanical properties on ordinary concrete, China Standards Press, Beijing, China.
  19. Hariri-Ardebili, M.A., Rahmani-Samani, H. and Mirtaheri, M. (2014), "Seismic stability assessment of a high-rise concrete tower utilizing endurance time analysis", Int. J. Struct. Stab. Dyn., 14(6), 1450016. http://dx.doi.org/10.1142/S0219455414500163.
  20. Hilo, S.J., Badaruzzaman, W.H.W., Osman, S.A. and Al-Zand, A.W. (2016), "Structural behavior of composite wall systems strengthened with embedded cold-formed steel tube", Thin Wall. Struct., 98, 607-616. http://dx.doi.org/10.1016/j.tws.2015.10.028.
  21. Hossain, K.M.A.; Mol, L.K. and Anwar, M.S. (2015), "Axial load behaviour of pierced profiled composite walls with strength enhancement devices", J. Constr. Steel Res., 110, 48-64. http://dx.doi.org/10.1016/j.jcsr.2015.03.009.
  22. Huang, S.T., Huang, Y.S., He, A., Tang, X.L, Chen, Q.J., Liu, X. and Cai, J. (2018), "Experimental study on seismic behaviour of an innovative composite shear wall", J. Constr. Steel Res., 148, 165-179. https://doi.org/10.1016/j.jcsr.2018.05.003.
  23. Huang, Z.Y. and Liew, J.Y.R. (2016), "Structural behaviour of steel-concrete-steel sandwich composite wall subjected to compression and end moment", Thin Wall. Struct., 98, 592-606. http://dx.doi.org/10.1016/j.tws.2015.10.013.
  24. JGJ/T 380-2015 (2015), Technical specification for steel plate shear walls, China Architecture & Building Press, Beijing, China.
  25. Ji, X.D., Cheng, X.W., Jia, X.F. and Varma, A.H. (2017), "Cyclic in-plane shear behavior of double-skin composite walls in high-rise buildings", J. Struct. Eng., 143(6), 04017025. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001749.
  26. Karami-Mohammadi, R., Mirtaheri, M., Salkhordeh, M., Mosaffa, E., Mahdavi, G. and Hariri-Ardebili, M. (2019), "Seismic mitigation of substation cable connected equipment using friction pendulum systems", Struct. Eng. Mech., 72(6), 805-816. https://doi.org/10.12989/sem.2019.72.6.805.
  27. Leekitwattana, M., Boyd, S.W. and Shenoi, R.A. (2011), "Evaluation of the transverse shear stiffness of a steel bi-directional corrugated-strip-core sandwich beam", J. Constr. Steel Res., 67(2), 248-254. https://doi.org/10.1016/j.jcsr.2010.07.010.
  28. Li, D., Smith, S. and Ma, X. (2016), "End condition effect on initial buckling performance of thin plates resting on tensionless elastic or rigid foundations", Int. J. Mech. Sci., 105, 83-89. https://doi.org/10.1016/j.ijmecsci.2015.11.001.
  29. Liu, W.Y., Li, G.Q. and Jiang, J. (2018), "Capacity design of boundary elements of beam-connected buckling restrained steel plate shear wall", Steel Compos. Struct., 29(2), 231-242. https://doi.org/10.12989/scs.2018.29.2.231.
  30. Luo, Y.F., Guo, X.N., Li, J., Xiong, Z., Meng, L., Dong, N. and Zhang, J. (2015), "Experimental research on seismic behaviour of the concrete-filled double-steel-plate composite wall", Adv. Struct. Eng., 18(11), 1845-1858. http://dx.doi.org/10.1260/1369-4332.18.11.1845.
  31. McKinley, B. and Boswell, L.F. (2002), "Behaviour of double skin composite construction", J. Constr. Steel Res., 58(10), 1347-1359. https://doi.org/10.1016/S0143-974X(02)00015-9.
  32. Mirtaheri, M., Gheidi, A., Zandi, A.P., Alanjari, P. and Samani, H.R. (2011), "Experimental optimization studies on steel core lengths in buckling restrained braces", J. Constr. Steel Res., 67(8), 1244-1253. https://doi.org/10.1016/j.jcsr.2011.03.004.
  33. Mirtaheri, M., Sehat, S. and Nazeryan, M. (2018), "Improving the behavior of buckling restrained braces through obtaining optimum steel core length", Struct. Eng. Mech., 65(4), 401-408. https://doi.org/10.12989/sem.2018.65.4.401.
  34. Mydin, M.A.O. and Wang, Y.C. (2011), "Structural performance of lightweight steel-foamed concrete-steel composite walling system under compression", Thin Wall. Struct., 49, 66-76. http://dx.doi.org/10.1016/j.tws.2010.08.007.
  35. Nguyen, N.H. and Whittaker, A.S. (2017), "Numerical modelling of steel-plate concrete composite shear walls", Eng. Struct., 150, 1-11. http://dx.doi.org/10.1016/j.engstruct.2017.06.030.
  36. Nie, J.G., Hu, H.S., Fan, J.S., Tao, M.X., Li, S.Y. and Liu, F.J. (2013), "Experimental study on seismic behavior of high-strength concrete filled double-steel-plate composite walls", J. Constr. Steel Res., 88, 206-219. http://dx.doi.org/10.1016/j.jcsr.2013.05.001.
  37. Prabha, P., Marimuthu, V., Saravanan, M., Palani, G.S., Lakshmanan, N. and Senthil, R. (2013), "Effect of confinement on steel-concrete composite light-weight load-bearing wall panels under compression", J. Constr. Steel Res., 81, 11-19. http://dx.doi.org/10.1016/j.jcsr.2012.10.008.
  38. Qin, Y., Shu, G.P., Zhou, G.G. and Han, J.H. (2019a), "Compressive behavior of double skin composite wall with different plate thicknesses", J. Constr. Steel Res., 157, 297-313. https://doi.org/10.1016/j.jcsr.2019.02.023.
  39. Qin, Y., Shu, G.P., Zhou, X.L., Han, J.H. and He, Y.F. (2019b), "Height-thickness ratio on axial behavior of composite wall with truss connector", Steel Compos. Struct., 30(4), 315-325. https://doi.org/10.12989/scs.2019.30.4.315.
  40. Qin, Y., Chen, X., Xi, W., Zhu, X.Y. and Chen, Y.Z. (2020a), "Compressive behavior of rectangular sandwich composite wall with different truss spacings", Steel Comp. Struct., 34(6), 783-794. https://doi.org/10.12989/scs.2020.35.4.495.
  41. Qin, Y., Chen, X., Zhu, X.Y., Xi, W. and Chen, Y.Z. (2020b), "Structural behavior of sandwich composite wall with truss connectors under compression", Steel Compos. Struct., 35(2), 159-169. https://doi.org/10.12989/scs.2020.35.2.159.
  42. Ridha, M.M., Li, D., Clifton, G.C. and Ma, X. (2019), "Structural behavior of composite panels made of lightly profiled steel skins and lightweight concrete under concentric and eccentric loads", J. Struct. Eng., 145(10), 1-9. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002380.
  43. Samani, H.R., Mirtaheri, M., Zandi, A.P. and Bahai, H. (2014), "The effects of dynamic loading on hysteretic behavior of frictional dampers", J. Shock Vib., 181534. https://doi.org/10.1155/2014/181534.
  44. Samani, H.R., Mirtaheri, M. and Rafiee, M. (2015), "The effects of various slippage loads on the response modification factor of steel structures equipped with frictional dampers", Int. J. Struct. Stab. Dyn., 15(6), 1450080. https://doi.org/10.1142/S0219455414500801.
  45. Seddighi, M., Barkhordari, M.A. and Hosseinzadeh, S.A.A. (2019), "Behavior of FRP-reinforced steel plate shear walls with various reinforcement designs", Steel Compos. Struct., 33(5), 729-746. http://dx.doi.org/10.12989/scs.2019.33.5.729.
  46. Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.T. and Salih, M.N.A. (2019), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., 33(4), 569-581. http://dx.doi.org/10.12989/scs.2019.33.4.569.
  47. Wright, H. (1998), "The axial load behaviour of composite walling", J. Constr. Steel Res., 45(3), 353-375. https://doi.org/10.1016/S0143-974X(97)00030-8.
  48. Yan, J.B., Wang, Z., Wang, T. and Wang, X.T. (2018), "Shear and tensile behaviors of headed stud connectors in double skin composite shear wall", Steel Compos. Struct., 26(6), 759-769. https://doi.org/10.12989/scs.2013.91.4.1301.
  49. Yan, J.B., Chen, A.Z. and Wang, T. (2019), "Developments of double skin composite walls using novel enhanced C-channel connectors", Steel Compos. Struct., 33(6), 877-889. https://doi.org/10.12989/scs.2019.33.6.877.
  50. Yang, Y., Liu, J.B. and Fan, J.S. (2016), "Buckling behavior of double-skin composite walls: An experimental and modeling study", J. Constr. Steel Res., 121, 126-135. http://dx.doi.org/10.1016/j.jcsr.2016.01.019.

Cited by

  1. Behavior of L-shaped double-skin composite walls under compression and biaxial bending vol.37, pp.4, 2020, https://doi.org/10.12989/scs.2020.37.4.405