DOI QR코드

DOI QR Code

ANN based on forgetting factor for online model updating in substructure pseudo-dynamic hybrid simulation

  • Wang, Yan Hua (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, Southeast University) ;
  • Lv, Jing (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, Southeast University) ;
  • Wu, Jing (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, Southeast University) ;
  • Wang, Cheng (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, Southeast University)
  • 투고 : 2019.10.11
  • 심사 : 2020.05.04
  • 발행 : 2020.07.25

초록

Substructure pseudo-dynamic hybrid simulation (SPDHS) combining the advantages of physical experiments and numerical simulation has become an important testing method for evaluating the dynamic responses of structures. Various parameter identification methods have been proposed for online model updating. However, if there is large model gap between the assumed numerical models and the real models, the parameter identification methods will cause large prediction errors. This study presents an ANN (artificial neural network) method based on forgetting factor. During the SPDHS of model updating, a dynamic sample window is formed in each loading step with forgetting factor to keep balance between the new samples and historical ones. The effectiveness and anti-noise ability of this method are evaluated by numerical analysis of a six-story frame structure with BRBs (Buckling Restrained Brace). One BRB is simulated in OpenFresco as the experimental substructure, while the rest is modeled in MATLAB. The results show that ANN is able to present more hysteresis behaviors that do not exist in the initial assumed numerical models. It is demonstrated that the proposed method has good adaptability and prediction accuracy of restoring force even under different loading histories.

키워드

과제정보

The research described in this paper was financially supported by the Natural Science Foundation of China under grants No.51708110.

참고문헌

  1. Baber, T.T. and Noori, M.N. (1985), "Random vibration of degrading, pinching systems", J. Eng. Mech., 111(8), 1010-1026. https://doi.org/10.1061/(ASCE)0733-9399(1985)111:8(1010)
  2. Carrion, J.E., Spencer, B.F. and Phillips, B.M. (2009), "Real-time hybrid simulation for structural control performance assessment", Earthq. Eng. Eng. Vib., 8(4), 481-492. https://doi.org/10.1007/s11803-009-9122-4
  3. Chen, C., Ricles, J.M., Marullo, T.M. and Mercan, O. (2009), "Real-time hybrid testing using the unconditionally stable explicit CR integration algorithm", Earthq. Eng. Struct. Dyn., 38(1), 23-44. https://doi.org/10.1002/eqe.838
  4. Chuang, M.C., Hsieh, S.H., Tsai, K.C., Li, C.H., Wang, K.J. and Wu, A.C. (2018), "Parameter identification for on-line model updating in hybrid simulations using a gradient-based method", Earthq. Eng. Struct. Dyn., 47(2), 269-293. https://doi.org/10.1002/eqe.2950
  5. Darby, A.P., Williams, M.S. and Blakeborough, A. (2002), "Stability and delay compensation for real-time substructure testing", J. Eng. Mech., 128(12), 1276-1284. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:12(1276)
  6. Dermitzakis, S.N. and Mahin, S.A. (1985), "Development of substructuring techniques for on-line computer controlled seismic performance testing", Ph.D. Dissertation; University of California, Berkeley, CA, USA.
  7. Elanwar, H.H. and Elnashai, A.S. (2016), "Framework for online model updating in earthquake hybrid simulations", J. Earthqu. Eng., 20(1), 80-100. https://doi.org/10.1080/13632469.2015.1051637
  8. Hashemi, M.J., Masroor, A. and Mosqueda, G. (2014), "Implementation of online model updating in hybrid simulation", Earthq. Eng. Struct. Dyn., 43(3), 395-412. https://doi.org/10.1002/eqe.2350
  9. Kim, S.J., Holub, C.J. and Elnashai, A.S. (2011), "Experimental investigation of the behavior of RC bridge piers subjected to horizontal and vertical earthquake motion", Eng. Struct., 33(7), 2221-2235. https://doi.org/10.1016/j.engstruct.2011.03.013
  10. Kim, J., Ghaboussi, J. and Elnashai, A.S. (2012), "hysteresis mechanical-informational modeling of bolted steel frame connections", Eng. Struct., 45, 1-11. https://doi.org/10.1016/j.engstruct.2012.06.014
  11. Kwon, O. and Kammula, V. (2013), "Model updating method for substructure pseudo-dynamic hybrid simulation", Earthq. Eng. Struct. Dyn., 42(13), 1971-1984. https://doi.org/10.1002/eqe.2307
  12. Kwon, O.S., Elnashai, A.S. and Spencer, B.F. (2008), "A famework for distributed analytical and hybrid simulations", Struct. Eng. Mech., Int. J., 30(3), 331-350. https://doi.org/10.12989/sem.2008.30.3.331
  13. MATLAB Inc. (2018), http://www.mathworks.com
  14. More, J.J. (1978), The Levenberg-Marquardt Algorithm: Implementation and Theory, In: Numerical Analysis (pp. 105-116), Springer, Berlin, Heidelberg, Germany. https://doi.org/10.1007/BFb0067700
  15. Nakashima, M. and Takai, H. (1985), "Use of Substructure Techniques in Pseudo Dynamic Testing", Research Report No. R111; Building Research Institute, Ministry of Construction, Japan.
  16. Nakashima, M., Kato, H. and Takaoka, E. (1992), "Development of real-time pseudo dynamic testing", Earthq. Eng. Struct. Dyn., 21(1), 79-92. https://doi.org/10.1002/eqe.4290210106
  17. Ning, X.Z., Wu, B., Tan, Q.Y., Yang, G. and Xu, G.S. (2019), "Application of online numerical simulation method in BRB-RC frame structure", J. Build. Struct., 40(10), 86-92. [In Chinese] https://doi.org/10.14006/j. jzjgxb.2019.0071
  18. Ou, G., Dyke, S.J. and Prakash, A. (2017), "Real time hybrid simulation with online model updating: An analysis of accuracy", Mech. Syst. Signal Proc., 84, 223-240. https://doi.org/10.1016/j.ymssp.2016.06.015
  19. Phillips, B.M. and Spencer Jr, B.F. (2013), "Model-based feedforward-feedback actuator control for real-time hybrid simulation", J. Struct. Eng., 139(7), 1205-1214. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000606
  20. Schellenberg, A., Kim, H.K. and Takahashi, Y. (2009), OpenFRESCO Command Language Manual, University of California, Berkeley, CA, USA.
  21. Shao, X., Mueller, A. and Mohammed, B.A. (2016), "Real-Time Hybrid Simulation with Online Model Updating: Methodology and Implementation", J. Eng. Mech., 142(2), 04015074. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000987
  22. Spencer, B.F., Chang, C.M., Frankie, T.M., Kuchma, D.A., Silva, P.F. and Abdelnaby, A.E. (2014), "A phased approach to enable hybrid simulation of complex structures", Earthq. Eng. Eng. Vib., 13(1), 63-77. https://doi.org/10.1007/s11803-014-0240-2
  23. Tang, Z.Y., Chen, S.C., Zhang, J.X. and Li, Z.B. (2016), "Study on the stability prediction of real-time dynamic substructuring system based on shaking table", Eng. Mech., 33(12), 217-224. [In Chinese] https://doi.org/10.6052/j.issn.1000-4750.2015.08.0716
  24. Wang, T. and Wu, B. (2013), "Hybrid testing method based on model updating with constrained unscented Kalman Filter", J. Earthq. Eng. Eng. Vib., 33(5), 100-109. [In Chinese] https://doi.org/10.13197/j.eeev.2013.05.100.wangt.013
  25. Wang, T., Zhai, X.H., Meng, L.Y. and Wang, Z. (2017), "Hybrid testing method based on an online neural network algorithm", J. Vib. Shock, 36(14), 1-8. [In Chinese] https://doi.org/10.13465/j.cnki.jvs.2017.14.001
  26. Wang, Z., Ning, X., Xu, G., Zhou, H. and Wu, B. (2019), "High performance compensation using an adaptive strategy for realtime hybrid simulation", Mech. Syst. Signal Proc., 133, 106262. https://doi.org/10.1016/j.ymssp.2019.106262
  27. Wu, B. and Wang, T. (2014), "Model updating with constrained unscented kalman filter for hybrid testing", Smart. Struct. Syst., Int. J., 14(6), 1105-1129. https://doi.org/10.12989/sss.2014.14.6.1105
  28. Wu, B. and Zhou, H. (2014), "Sliding mode for equivalent force control in real-time substructure test", Struct. Control. Health Monit., 21(10), 1284-1303. https://doi.org/10.1002/stc.1648
  29. Wu, B., Bao, H., Ou, J. and Tian, S. (2005), "Stability and accuracy analysis of the central difference method for real-time substructure testing", Earthq. Eng. Struct. Dyn., 34(7), 705-718. https://doi.org/10.1002/eqe.451
  30. Wu, B., Xu, G., Wang, Q. and Williams, M.S. (2006), "Operatorsplitting method for real-time substructure testing", Earthq. Eng. Struct. Dyn., 35(3), 293-314. https://doi.org/10.1002/eqe.519
  31. Wu, B., Ning, X., Xu, G., Wang, Z., Mei, Z. and Yang, G. (2018), "Online numerical simulation: A hybrid simulation method for incomplete boundary conditions", Earthq. Eng. Struct. Dyn., 47(4), 889-905. https://doi.org/10.1002/eqe.2996
  32. Yang, W.J. and Nakano, Y. (2005), "Substructure online test by using real-time hysteresis modeling with a neural network", Adv. Experim. Struct. Eng., 38, 267-274.
  33. Yang, Y.S., Tsai, K.C., Elnashai, A.S. and Hsieh, T.J. (2012), "An online optimization method for bridge dynamic hybrid simulations", Simul. Model. Pract. Theory, 28, 42-54. https://doi.org/10.1016/j.simpat.2012.06.002
  34. Yun, G.J., Ghaboussi, J. and Elnashai, A.S. (2008a), "A new neural network-based model for hysteresis behavior of materials", Int. J. Numer. Meth. Eng., 73(4), 447-469. https://doi.org/10.1002/nme.2082
  35. Yun, G.J., Ghaboussi, J. and Elnashai, A.S. (2008b), "Self-learning simulation method for inverse nonlinear modeling of cyclic behavior of connections", Comput. Meth. Appl. Mech. Eng., 197(33-40), 2836-2857. https://doi.org/10.1016/j.cma.2008.01.021
  36. Zakersalehi, M., Tasnimi, A.A. and Ahmadizadeh, M. (2019), "Reliable nonlinear hybrid simulation using modified operator splitting technique", Struct. Control. Health Monit., 26(1), e2283. https://doi.org/10.1002/stc.2283
  37. Zhang, J., Wu, B. and Wang, T. (2011), "Adaptive substructure testing method based on least square", Proceedings of International Conference on Electric Technology and Civil Engineering (ICETCE), IEEE. https://doi.org/10.1109/ICETCE.2011.5775338

피인용 문헌

  1. Implementation of online model updating with ANN method in substructure pseudo-dynamic hybrid simulation vol.28, pp.2, 2020, https://doi.org/10.12989/sss.2021.28.2.261