초록
최근 전자뇌관은 다양한 현장에서 폭넓게 사용되어지고 있다. 흔히 전자뇌관은 발파에 의해 발생되는 소음과 진동을 줄이기 위한 목적으로 사용된다. 또한 일반뇌관에 의한 발파작업이 불가능한 지역이나 보안물건이 근접하여 기계식굴착 공법이 적용된 현장에서 정밀한 발파작업을 위해 전자뇌관을 사용하고 있다. 발파현장에서는 전자뇌관을 이용하여 시공성을 높이고 생산원가를 낮추기 위한 다양한 기술이 시도되고 있다. 본 사례는 보안물건이 근접해 있는 지역에서 전자뇌관을 사용하여 보안물건에 대한 허용기준치를 충족시키면서 작업의 효율성을 높인 시공사례를 소개한다. 한화에서 생산하는 하이트로닉II(HiTRONIC II™)를 사용하여 국내 및 해외 수직구 현장에서 작업을 시행하였다. 일반적으로 수직구 현장에서는 발파에 따른 소음과 진동 영향 때문에 굴착면을 분할하여 발파를 시행한다. 그러나, 본 사례에서는 발파 굴착면을 1회에 전단면발파를 실시하였으며 이에 따른 공사기간을 단축시킬 수 있었다.
Recently, electronic detonators have been widely used in various sites. Electronic detonators are often used for the purpose of reducing the noise and vibration produced by blasting. In addition, electronic detonators are used for precision blasting at sites where mechanical excavation techniques are applied due to proximity of safety things or where blasting by conventional detonators are not possible. Various technologies are being attempted at the blasting site to increase constructivity and lower production costs by using electronic detonators. In this paper, we would like to introduce a construction case that use of electronic detonators in the situation of safety things being adjacent increases the efficiency of construction while meeting the ground vibration criteria of Ministry of Land, Infrastructure, and Transport. The blasting was carried out at domestic and overseas shaft using HiTRONIC II™, produced by Hanwha. Generally the shaft blasting is performed by dividing the blasting surface because of the noise and vibration caused by the blasting. but, in the case introduced in this paper, the blasting was carried out once without dividing the blasting surface, thus the construction period could be shortened.