Abstract
The CM247LC, a Ni-based superalloy material used for gas turbine hot gas path parts, is casted using directionally solidified technology to analyze the mechanical properties and microstructures through HIP (Hot Isostatic Pressing) and post-heat treatment, and to derive optimal HIP treatment conditions. The CM247LC material is being researched in various ways as an alternative material for prototyping gas turbine blades. In particular, the blade rotating part is exposed and operated in a high temperature and high-pressure environment, and when damaged, it may cause huge economic losses. Therefore, in order to use the CM247LC material as prototyping materials for gas turbine blades, the reliability of the microstructure and mechanical properties must be verified. In this study, after casting rod test specimens using CM247LC material by directionally solidified technology, after that the specimens were performed by HIP treatment and post-heat treatment to test two HIP conditions designed by KEPCO to derive the possibility of prototyping of CM247LC material and optimization of HIP treatment conditions. Additionally, the properties of CM247LC material were compared to the GTD111DS material using for 1,300℃ class gas turbine blades.
가스터빈 고온부품 소재로 사용되는 Ni기 초합금 CM247LC 소재에 대한 최적 후처리 조건을 도출하기 위해 일방향 응고 주조법을 통한 봉상시험편을 제작하였다. 제작된 시험편은 HIP (Hot Isostatic Pressing) 처리 및 후열처리를 통해 기계적 특성과 미세 구조를 분석하여 최적의 HIP처리 조건을 도출하고자 하였다. CM247LC 소재의 경우 가스터빈 블레이드의 대체 소재로써 시제품 제작을 위한 다양한 연구가 진행되고 있다. 특히 블레이드의 경우 고속의 회전체로 고온 및 고압의 운전 환경에 노출되어 손상 시 후단의 블레이드와 베인에 대해 추가적인 설비 파손을 야기하여 막대한 경제적 손실을 초래할 수 있다. 따라서, CM247LC 소재가 블레이드 시제품 제작에 사용되기 위해서는 미세구조와 기계적 특성에 대한 신뢰성이 확보되어야 한다. 따라서 본 연구에서는 CM247LC 소재에 대한 기계적 특성 향상을 위해 전력연구원에서 설계한 기준에 따라 HIP처리 및 열처리를 수행하고 미세조직 특성 및 기계적 특성 분석을 통해 기존 1,300℃급 가스터빈 블레이드에 소재로 활용되고 있는 GTD111DS 소재와 기계적 특성을 비교 평가하였다.