참고문헌
- Abdelwahed B. (2019). "A review on building progressive collapse, survey and discussion". Case Studies in Construction Materials, 11, e00264. https://doi.org/10.1016/j.cscm.2019.e00264
- Adam JM, Parisi F, Sagaseta J, Lu X. (2018). "Research and practice on progressive collapse and robustness of building."structures in the 21st Century. Eng Struct,173, 122-49. https://doi.org/10.1016/j.engstruct.2018.06.082
- Agarwal, J., D. Blockley, and N. Woodman. (2001). "Vulnerability of 3-dimensional trusses." Structural Safety, 23(3), 203-220. https://doi.org/10.1016/S0167-4730(01)00013-3
- Agarwal, J., D. Blockley, and N. Woodman. (2003). "Vulnerability of structural systems." Structural Safety, 25(3), 263-286. https://doi.org/10.1016/S0167-4730(02)00068-1
- Agarwal J., England J., (2008). "Recent Developments in Robustness and Relation with Risk." Proc. Inst. Civ. Eng., Struct. Build., 161, 4, 183-188. https://doi.org/10.1680/stbu.2008.161.4.183
- Agarwal J, Haberland M, Holicky M, Sykora M, Thelandersson S. (2012), "Robustness of structures: Lessons from failures." Struct Eng Int, 22, 105-11. https://doi.org/10.2749/101686612X13216060213635
- ASCE 7. (2010). "American Society of Civil Engineers Standard 7 Minimum Design Loads for Buildings and Other Structures." American Society of Civil Engineers.
- Azim I., Yang J., Bhatta S. et al. (2020). "Factors influencing the progressive collapse resistance of RC frame structures." Journal of Building Engineering, 27, 100986. https://doi.org/10.1016/j.jobe.2019.100986
- Baker, J.W., Schubert, M. and Faber, M.H. (2008), "On the assessment of robustness." Structural Safety, 30, 253-267. https://doi.org/10.1016/j.strusafe.2006.11.004
- Baker, J. F., Williams, E. L., and Lax, D. (1948). "The civil engineer in war-Volume 3: Properties of materials, structures, hydraulics, tunneling and surveying." Symp. of Papers, Institution of Civil Engineers, London.
- Bao Y.H., Main J.A. Noh S.Y. (2017). "Evaluation of Structural Robustness against Column Loss: Methodology and Application to RC Frame Buildings." Journal of Structural Engineering, 143(8), 04017066. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001795
- Beeby, A. (1999). "and a new approach to robustness. Structural Engineer.", Safety of structures, 77(4).
- Biondini F., Frangopol D. M., Restelli S. (2008). "On Structural Robustness, Redundancy and Static Indeterminacy." Proc. of ASCE/SEI Struct. Congress, ASCE/SEI, Reston, Va.
- Bita H.M., Huber J.A.J., Voulpiotis K., and Tannert T. (2019). "Survey of contemporary practices for dispro-portionate collapse prevention." Engineering Structures, 199, 109578. https://doi.org/10.1016/j.engstruct.2019.109578
- Blockley, D., et al. (2002). Structural vulnerability, reliability and risk. Progress in Structural Engineering and Materials, 4(2), 203-212. https://doi.org/10.1002/pse.109
- Bontempi F., Giuliani L., Gkoumas K. (2007)." Handling the Exceptions: Robustness Assessment of a Complex Structural System." Proc. of the 3rd Int. Conf on Struct. Engng., Mech. A. Comp. (SEMC 2007), Millpress, Rotterdam, The Netherlands, 1747-1752.
- Brett C, Lu Y. (2013). "Assessment of robustness of structures: current state of research." Front Struct Civ Eng, 7(4): 356-68. https://doi.org/10.1007/s11709-013-0220-z
- Byfield M, Mudalige W, Morison C, Stoddart E. (2014). "A review of progressive collapse research and regulations."Proc ICE-Struct Build, 167,447-56. https://doi.org/10.1680/stbu.12.00023
- Canisius TDG, Sorensen JD, Baker JW. (2007). "Robustness of structural systems - a new focus for the Joint Committee on Structural Safety (JCSS)." Proceedings of the 10th international conference on applications of statistics and probability in civil engineering (ICASP10)., London, Taylor and Francis.
- Chen C.H., Zhu Y.F., Yao Y. et al. (2016a). "An evaluation method to predict progressive collapse resistance of steel frame structures." Journal of Constructional Steel Research, 122, 238-250. https://doi.org/10.1016/j.jcsr.2016.03.024
- Chen Y.L., Huang L. and Lu Y.Q. et al. (2016b). "Assessment of Structural Robustness under Different Events according to Vulnerability." Journal of Performanceof Constructed Facilities, 30(5), 04016004. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000854
- Choi J.H. and Chang D.K. (2009). "Prevention of progressive collapse for building structures to member disappearance by accidental actions." Journal of Loss Prevention in the Process Industries, 22, 1016-1019. https://doi.org/10.1016/j.jlp.2009.08.020
- Chung K., Park C., and Kim D. (2016). "Design Considerations for Concrete High-Rise Buildings." International Journal of High-Rise Buildings, 5(3), 187-193. https://doi.org/10.21022/IJHRB.2016.5.3.187
- Chung K. and Yoo S. (2019). "Structural Design and Construction of Mega Braced Frame System for Tall Buildings." International Journal of High-Rise Buildings, 8(3), 169-175. https://doi.org/10.21022/IJHRB.2019.8.3.169
- Corley, W. G., Mlakar, P., Sozen, M., and Thornton, C. (1998). "The Oklahoma City bombing: Summary and recommendations for multihazard mitigation." J. Perform. Constr. Facil., 123, 100-112.
- DoD. (2013) Design of Buildings to Resist Progressive Collapse. Unified Facilities Criteria (UFC) 4-023-03, US Department of Defense (DoD).
- EN 1991-1-7. (2010).Actions on structures - Part 1-7: General actions -Accidental actions.
- Ellingwood, B. & Leyendecker, E.V., (1978), "Approaches for design against progressive collapse", J. Struct. Div., 104(3), 413-423. https://doi.org/10.1061/JSDEAG.0004876
- Ellingwood B.R., (2005). "Strategies for mitigating risk of progressive collapse." Proc. of ASCE/SEI Struct. Congress, ASCE/SEI, 2005.
- Ellingwood, B.R., and Dusenberry D.O., (2005). "Building design for abnormal load and progressive collapse", Computer-Aided Civil and Infrastructure Engineering, 20, 194-205. https://doi.org/10.1111/j.1467-8667.2005.00387.x
- Ellingwood BR., (2006). "Mitigating risk from abnormal loads and progressive collapse." J Perform Constr Facil. 20(4):315-23. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(315)
- Ellingwood B.R. (2009). "Abnormal loads and dispro-portionate collapse: risk mitigation strategies." Proc. of ASCE/SEI Struct. Congress, ASCE/SEI, 2009.
- El-Tawil S, Li H, Kunnath S. (2013). "Computational simulation of gravity-induced progressive collapse of steel-frame buildings: Current trends and future research needs." J Struct Eng, 140, A2513001.
- England, J., J. Agarwal, and D. Blockley., (2008). "The vulnerability of structures to unforeseen events." Computers & Structures. 86(10), 1042-1051. https://doi.org/10.1016/j.compstruc.2007.05.039
- Faber M.H. (2006). "Robustness of Structures: An Introduction." Structural Engineering International, 16(2), 101. https://doi.org/10.2749/101686606777962404
- Fallon CT, Quiel SE, Naito CJ., (2016), "Uniform pushdown approach for quantifying building-frame robustness and the consequence of disproportionate collapse." J Perform Constr Facil. 30(6), 04016060 https://doi.org/10.1061/(ASCE)CF.1943-5509.0000912
- Fang Z.X. and Li H.Q. (2007). "Safety and robustness of structures from the viewpoint of energy." Journal of Building Structures, 28, 269-273. (in Chinese)
- Felipe T.R.C., Haach V.G., Beck A. (2018). "Systematic reliability-based approach to progressive collapse." Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 4(4), 04018039
- Feng D.C., Xie S.C., Xu J., and Qian K. (2020). "Robustness quantifification of reinforced concrete structures subjected to progressive collapse via the probability density evolution method." Engineering Structures, 202, 109877. https://doi.org/10.1016/j.engstruct.2019.109877
- Feng, Y.Y. and F. Moses, (1986). "Optimum design, redundancy and reliability of structural systems." Computers & structures, 24(2),239-251. https://doi.org/10.1016/0045-7949(86)90283-X
- Formisano A., Landolfo R. and Mazzolani F.M. (2015). "Robustness assessment approaches for steel framed structures under catastrophic events." Computers and Structures, 147, 216-228. https://doi.org/10.1016/j.compstruc.2014.09.010
- Frangopol, D. M., and Nakib, R. (1991). "Redundancy in highway bridges." Engineering. Journal., 28(1), 45-50.
- Frangopol, D. and J. Curley, 1987, "Effects of Damage and Redundancy on Structural Reliability." Journal of Structural Engineering, 113(7): 1533-1549. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:7(1533)
- Fu F. (2016). "Review of Structural Analysis and Design to Prevent Disproportionate Collapse." CRC Press, Taylor & Francis Group, Boca Raton.
- Fu, G. and D.M. Frangopol, (1990). "Balancing weight, system reliability and redundancy in a multiobjective optimization framework." Structural Safety, 1990. 7(2-4): 165-175. https://doi.org/10.1016/0167-4730(90)90066-X
- Gao Y. (2009). "Importance coefficients of components in quantitative evaluation of structural robustness." PhD Thesis, Shanghai Jiao Tong University, Shanghai (in Chinese)
- Gao Y., Liu X.L.(2008). "Importance coeffificients of components in evaluation of structure robustness." J. Rock Mech. Eng. 27(12), 2575-2584 (in Chinese)
- Gharaibeh E., Frangopol D.M. and Onoufriou T. (2002). "Reliability-based importance assessment of structural members with applications to complex structures." Computers and Structures, 80, 1113-1131. https://doi.org/10.1016/S0045-7949(02)00070-6
- Ghosn, M., and Moses, F. (1998). "Redundancy in highway bridge superstructures." National Cooperative Highway Research Program (NCHRP), Washington, DC.
- Ghosn M., Moses F., Frangopol D.M. (2010). "Redundancy and robustness of highway bridge superstructures and substructures." Structure and Infrastructure Engineering, 6(1), 257-278. https://doi.org/10.1080/15732470802664498
- Ghosn M., Duenas-Osorio L., Frangopol D.M. et al. (2016a). "Performance indicators for structural systems and infrastructure networks." Journal of Structural Engineering,142(9), F4016003. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001542
- Ghosn M., Frangopol D.M., McAllister T.P. et al. (2016b). "Reliability-based performance indicators for structural members." Journal of Structural Engineering, 142(9), F4016002. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001546
- Gross J.L. and McGuire W. (1983). "Progressive collapse resistant design." Journal of Structural Engineering, 109(1), 1-15. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:1(1)
- GSA. (2005). "Progressive Collapse Analysis and Design Guidelines for New Federal Office Buildings and Major Modernization Projects." US General Services Administration (GSA).
- Ha T., Kim S., and Lee S. (2017). "Prediction of Time-dependent Lateral Movement Induced by Differential Shortening in Tall Buildings Using Construction Stage Analysis." International Journal of High-Rise Buildings, 6(1), 11-19. https://doi.org/10.21022/IJHRB.2017.6.1.11
- Haberland, M. (2007). "Progressiver Kollaps und Robustheit (Progressive collapse and robustness)." Thesis (diploma). Hamburg University of Technology, Structural Analysis and Steel Structures Institute, Hamburg, Germany.
- Hansen E., Wong F. Lawver D. et al. (2005). "Development of an analytical database to support a fast running progressive collapse assessment tool." Structures.
- Hendawi, S. and Frangopol, D.M. (1994). "System reliability and redundancy in structural design and evaluation." Structural Safety, 16 (1-2), 47-71. https://doi.org/10.1016/0167-4730(94)00027-N
- Hu X.B. (2007). "Studies on the progressive collapse resistance behavior of the new type polyhedral space frame." Thesis, Tsinghua University, Beijing. (in Chinese)
- Huang L. and Li L.(2012). "A quantification method of structural robustness." Engineering Mechanics, 29(8): 213-219. (in Chinese)
- Huang Y.Z. and Wang Z. (2012). "An approach for evaluation of the structural robustness of steel frames." China Civil Engineering Journal, 45(9), 46-54. (in Chinese)
- Huo J.S., Hu C.L., Zhang J.Q. et al. (2012). "Analysis of dynamic behaviors and ductility of steel moment frame connections." Journal of Civil, Architectural & EnvironentalEngineering, 34, 149-154. (in Chinese)
- Husain M. and Tsopelas P. (2004). "Measures of Structural Redundancy in Reinforced Concrete Buildings." I: Redundancy Indices. Journal of Structural Engineering, 130(11), 1651-1658. https://doi.org/10.1061/(asce)0733-9445(2004)130:11(1651)
- Isobe D. (2017). "Progressive collapse analysis of structures: numerical codes and applications." Butterworth-Heinemann.
- IStructE. (2002). "Safety in tall buildings and other buildings with large occupancy." London: Institution of Structural Engineers.
- Izzuddin, B.A., Vlassis, A.G., Elghazouli, A.Y. and Nethercot, D.A., (2008). "Progressive Collapse of Multi-Storey Buildings due to Sudden Column Loss - Part I: Simplified Assessment Framework." Engineering Structures, Vol. 30, No. 5,308-1318.
- JCSS (2008) Risk Assessment in Engineering. Principles, System Representation and Risk Criteria. Joint Committee of Structural Safety (JCSS), Zurich, Switzerland.
- Jiang J. and Li G.Q. (2018). "Progressive Collapse of Steel High-Rise Buildings Exposed to Fire: Current State of Research." International Journal of High-Rise Buildings, 7(4), 375-387. https://doi.org/10.21022/IJHRB.2018.7.4.375
- JSSC. (2005). "Guildlines for Collapse Control Design: Construction of Steel Buildings with High Redundancy Design." Japanese Society of Steel and Construction (JSSC) and Council on Tall Buildings and Urban Habitat(CTBUH), Japan Iron and Steel Federation.
- Khandelwal K. and El-Tawil S. (2005). "Progressive collapse of moment resisting steel frame buildings." Proc. of ASCE/SEI Struct. Congress, ASCE/SEI, 2005.
- Khandelwal K., El-Tawil S. (2011). "Pushdown resistance as a measure of robustness in progressive collapse analysis." Engineering Structures, 33, 2653-2661. https://doi.org/10.1016/j.engstruct.2011.05.013
- Kiakojouri F., Biagi V.D., Chiaia B., et al. (2020). "Progressive collapse of framed building structures: Current knowledge and future prospects." Engineering Structures, 206, 110061. https://doi.org/10.1016/j.engstruct.2019.110061
- Kokot S, Solomos G. (2012). "Progressive collapse risk analysis: literature survey, relevant construction standards and guidelines." Ispra: Joint Research Centre, European Commission; 2012.
- Kong D.Y., Yang Y., Yang B., Zhou X.H. (2020). "Experimental Study on Progressive Collapse of 3D Steel Frames under Concentrated and Uniformly Distributed Loading Conditions." Journal of Structural Engineering, 146(4), 04020017. https://doi.org/10.1061/(asce)st.1943-541x.0002537
- Krauthammer T. Modern protective structures. Boca Raton: CRC Press; 2008.
- Kunnath S.K., Bao Y.H. and El-Tawil S. (2018). "Advances in Computational Simulation of Gravity-Induced Dispro-portionate Collapse of RC Frame Buildings." Journal of Structural Engineering, 144(2), 03117003. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001938
- Kwon K., Park S., and Kim J. (2012). "Evaluation of Progressive Collapse Resisting Capacity of Tall Buildings." International Journal of High-Rise Buildings, 1(3), 229-235. https://doi.org/10.21022/IJHRB.2012.1.3.229
- Li G.Q., Zhang C. and Jiang J. (2018a). "A Review on Fire Safety Engineering: Key Issues for High-Rise Buildings." International Journal of High-Rise Buildings, 7(4), 265-285. https://doi.org/10.21022/IJHRB.2018.7.4.265
- Li L.L., Li G.Q., Jiang B.H., Lu Y. (2018b). "Analysis of robustness of steel frames against progressive collapse." Journal of Constructional Steel Research, 143, 264-278. https://doi.org/10.1016/j.jcsr.2018.01.010
- Li S., Petrone F. and Kunnath S. (2019). "Robustness of RC buildings to progressive collapse: Influence of building height." Engineering Structures, 183, 690-701. https://doi.org/10.1016/j.engstruct.2019.01.052
- Liao, K.-W., Y.-K. Wen, and D. Foutch. (2007). "Evaluation of 3D steel moment frames under earthquake excitations. II: Reliability and redundancy." Journal of structural engineering, 133(3), 471-480 https://doi.org/10.1061/(asce)0733-9445(2007)133:3(471)
- Lin H., Yang L., Chen G.M. et al. (2019). "A novel methodology for structural robustness assessment of offshore platforms in progressive collapse." Journal of Loss Prevention in the Process Industries, 62, 103966. https://doi.org/10.1016/j.jlp.2019.103966
- Lind, N.C. (1995), "A measure of vulnerability and damage tolerance." Reliability Engineering and System Safety, Vol. 48, No. 1, 1-6. https://doi.org/10.1016/0951-8320(95)00007-O
- Liu C.M., and Liu X.L. (2005). "Stiffness-based evaluation of component importance and its relationship with redundancy." Journal of Shanghai Jiao Tong University, 39(5), 746-750. (in Chinese)
- Lv D.G., Song P.Y., Cui S.S., and Wang M.X. (2011). "Structural robustness and its assessment indicators."Journal of Building Structures, 32(11), 44-54. (in Chinese)
- Maes, M. A. (1995). "Tail heaviness in structural reliability Proceedings of the 7th International Conference on Applications of Statistics and Probability in Civil Engineering Reliability and Risk Analysis." eds. Lemaire, M. et al, Paris, France, 1995.
- Maes, M.A., Fritzsons, K.E. and Glowienka, S. (2006), "Structural robustness in the light of risk and consequenceanalysis", IABSE, Structural Engineering International, Vol. 16, No. 2, 101-107.
- Marchand K. and Stevens D.J. (2015). "Progressive Collapse Criteria and Design Approaches Improvement." Journal of Performance of Constructured Facilities, 29(5), B4015004.
- Masoero E., Daro P. and Chiaia B.M. (2013). "Progressive collapse of 2D framed structures: an analytical model." Engineering Structures, 54, 94-102. https://doi.org/10.1016/j.engstruct.2013.03.053
- Menchel K., Massart T.J., Rammer Y. and Bouillard P. (2009). "Comparison and Study of Different Progressive Collapse Simulation Techniques for RC Structures." Journal of Structural Engineering, 135(6), 685-697. https://doi.org/10.1061/(asce)0733-9445(2009)135:6(685)
- Mohamed O.A. (2006). "Progressive Collapse of Structures: Annotated Bibliography and Comparison of Codes and Standards." Journal of Performance of Constructured Facilities, 20(4), 418-425. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(418)
- Nafday A.M. (2008). "System Safety Performance Metrics for Skeletal Structures." Journal of Structural Engineering, 134(3), 499-504. https://doi.org/10.1061/(asce)0733-9445(2008)134:3(499)
- Nafday AM. (2011). "Consequence-based structural design approach for black swan events." Struct Saf, 33(1):108-14. https://doi.org/10.1016/j.strusafe.2010.09.003
- Nair R.S. (2006). "Preventing disproportionte collapse." Journal of Performance of Constructured Facilities, 20(4), 309-314. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(309)
- Nazri F.M., Zolkifle M. Mansor H. et al. (2017). "Vulnerability Assessment of Building Frames Subjected to Progressive Collapse Caused by Earthquake." MATEC Web of Conferences, 103, 02019. https://doi.org/10.1051/matecconf/201710302019
- NIST. (2007). "Best practices for reducing the potential for progressive collapse in buildings", NISTIR 7396, National Institute of Standards and Technology, Gaithersburg, MD (194 pp).
- Pandey P.C. and Barai S.V. (1997). "Structural sensitivity as a measure of redundancy." Journal of Structural Engineering, 123(3), 360-364. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:3(360)
- Pantidis P. and Gerasimidis S. (2017). "New Euler-Type Progressive Collapse Curves for Steel Moment-Resisting Frames: Analytical Method." Journal of Structural Engineering, 143(9), 04017113 https://doi.org/10.1061/(ASCE)ST.1943-541X.0001834
- Parisi F, Augenti N. (2012), "Inflfluence of seismic design criteria on blast resistance of RC framed buildings: A case study." Eng Struct, 2012;44:78-93. https://doi.org/10.1016/j.engstruct.2012.05.046
- Pearson C. and Delatte N. (2005). "Ronan Point apartment tower collapse and its effect on building codes." Journal of Performance of Constructured Facilities, 19(2), 172-177. https://doi.org/10.1061/(ASCE)0887-3828(2005)19:2(172)
- Pinto J.T., Blockley D.I., Woodman N.J. (2002). "The risk of vulnerable failure." Structural Safety, 24, 107-122. https://doi.org/10.1016/S0167-4730(02)00020-6
- Qian K. and Li B. (2015). "Research Advances in Design of Structures to Resist Progressive Collapse." Journal of Performance of Constructured Facilities, 29(5), B4014007
- Russell J.M., Sagaseta J., Cormie D., Jones A.E.K. (2019). "Historical review of prescriptive design rules for robustness after the collapse of Ronan Point." Structures, 20, 365-373. https://doi.org/10.1016/j.istruc.2019.04.011
- Smilowitz R. and Tennant D. (2001). "Multi-Hazard Design to Resist Progressive Collapse." Structures.
- Smith, J.W.(2006), "Structural robustness analysis and the fast fracture analogy", IABSE, Structural Engineering International, Vol. 16, No. 2, 118-123, 2006. https://doi.org/10.2749/101686606777962521
- Starossek U. (2006). "The 2006 Annual Conference of the Structural Engineering Committee of the Korean Society of Civil Engineers." Progressive collapse of structures. Seoul, Korea, May 25, 2006
- Starossek, U., (2007). "Typology of progressive collapse." Engineering Structures, 29(9), 2302-2307. https://doi.org/10.1016/j.engstruct.2006.11.025
- Starossek U. and Haberland M. (2008). "Measures of structural robutness-requirements and applications." Proc. of ASCE/SEI Struct. Congress, ASCE/SEI, 2008.
- Starossek, U. (2009). "Progressive collapse of structures." Thomas Telford Ltd., London.
- Starossek U, Haberland M. (2010) "Disproportionate collapse: terminology and procedures." J Perform Construct Facil; 24(6): 519-28. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000138
- Starossek U, Haberland M. (2011). "Approaches to measures of structural robustness." Structure and Infrastructure Engineering, 7, 625-631. https://doi.org/10.1080/15732479.2010.501562
- Starossek U, Smilowitz R., Waggoner M. (2011). "Report of the Terminology and Procedures Sub-Committee (SC1): Recommendations for Design against Disproportionate Collapse of Structures." Proc. of ASCE/SEI Struct. Congress, ASCE/SEI, 2011.
- Starossek U. (2018). Progressive collapse of structures. 2nd ed. London: ICE Publishing,.
- Stevens D., Crowder B., Sunshine D. et al. (2011). "DoD Research and Criteria for the Design of Buildings to Resist Progressive Collapse." Journal of Structural Engineering, 137(9), 870-880. https://doi.org/10.1061/(asce)st.1943-541x.0000432
- Stewart M.G. (2017). "Risk of Progressive Collapse of Buildings from Terrorist Attacks: Are the Benefits of Protection Worth the Cost?" Journal of Performance of Constructured Facilities, 31(2), 04016093. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000954
- Stochino F, Bedon C, Sagaseta J, Honfifi D. (2019). "Robustness and resilience of structures under extreme loads." Adv Civil Eng, 2019;2019:1-14.
- Subki N.E.A., Mansor H., Hamid Y.S. Parke G. (2019). "Progressive Collapse Assessment: A review of the current energy-based Alternate Load Path (ALP) method."MATEC Web of Conferences, 258, 02012.
- Szyniszewski S. (2009). "Dynamic energy based method for progressive collapse analysis." Proc. of ASCE/SEI Struct. Congress, ASCE/SEI, 2009.
- Szyniszewski S. and Krauthammer T. (2012). "Energy flow in progressive collapse of steel framed buildings." Engineering Structures, 42, 142-153. https://doi.org/10.1016/j.engstruct.2012.04.014
- Sorensen JD. (2011). "Framework for robustness assessment of timber structures." Eng Struct 2011; 33(11):3087-92. https://doi.org/10.1016/j.engstruct.2011.02.025
- Tsai M.H. (2012). "A performance-based design approach for retrofifitting regular building frames with steel braces against sudden column loss." Journal of Constructional Steel Research, 77, 1-11. https://doi.org/10.1016/j.jcsr.2012.04.008
- Tsopelas P. and Husain M. (2004). "Measures of Structural Redundancy in Reinforced Concrete Buildings. II: Redundancy response modification factor RR." Journal of Structural Engineering, 130(11), 1659-1666. https://doi.org/10.1061/(asce)0733-9445(2004)130:11(1659)
- Vlassis, A.G., Izzuddin, B.A., Elghazouli, A.Y. and Nethercot, D.A., (2009) "Progressive Collapse of Multi-Storey Buildings due to failed floor impact", Engineering Structures, Vol. 31, 1522-1534. https://doi.org/10.1016/j.engstruct.2009.02.009
- Vrouwenvelder T. (2008). "Treatment of Risk and Reliability in the Eurocodes." Proc. Inst. Civ. Eng., Struct. Build., 161, 4, 209-214. https://doi.org/10.1680/stbu.2008.161.4.209
- Wilkes J. and Krauthammer T. (2019). "An energy flow apporach for progressive collapse assessment." Engineering Structures, 190, 333-344. https://doi.org/10.1016/j.engstruct.2019.04.001
- Wisniewski, D., Casas, J.R. and Ghosn, M. (2006), "Load capacity evaluation of existing railway bridges based on robustness quantification", IABSE, Structural EngineeringInternational, Vol. 16, No. 2, 161-166. https://doi.org/10.2749/101686606777962440
- Xiao H. and Hedegaard B. (2018). "Flexural, Compressive Arch, and Catenary Mechanisms in Pseudostatic Pro-gressive Collapse Analysis." Journal of Performance of Constructured Facilities, 32(1), 04017115. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001110
- Xu G.Q. and Ellingwood B.R. (2011). Disproportionate collapse performance of partially restrained steel frames with bolted T-stub connections. Engineering Structures, 33, 32-43. https://doi.org/10.1016/j.engstruct.2010.09.015
- Yan S., Zhao X.Z., Rasmussen K.J.R. and Zhang H. (2019). "Identifification of critical members for progressive collapse analysis of single-layer latticed domes." Engineering Structures, 188, 111-120. https://doi.org/10.1016/j.engstruct.2019.03.027
- Ye J.H. and Jiang L.Q. (2018). "Collapse mechanism analysis of a steel moment frame based on structural vulnerability theory." Archives of Civil and Mechanical Engineering, 18, 833-843. https://doi.org/10.1016/j.acme.2018.01.001
- Ye L.P., Lin X.C., Qu Z. et al. (2010). "Evaluating method of element importance of structural system based on generalized structural stiffness." Journal of Architecture and Civil Engineering, 27(1), 1-6. (in Chinese)
- Zhang L.M. and Liu X.L. (2007). "Network of energy transfer in frame structures and its preliminary application." China Civil Engineering Journal, 40(3), 45-49. (in Chinese) https://doi.org/10.3321/j.issn:1000-131X.2007.03.008
- Zhou X.H. and Liu J.P. (2019). "Application of Steel-tubed Concrete Structuresin High-rise Buildings." International Journal of High-Rise Buildings, 8(3), 161-167. https://doi.org/10.21022/IJHRB.2019.8.3.161
- Zio E. (2016). "Challenges in the vulnerability and risk analysis of critical Infrastructures." Reliability Engineeringand System Safety, 152, 137-150. https://doi.org/10.1016/j.ress.2016.02.009