DOI QR코드

DOI QR Code

Perforated TWCF steel beam-columns: European design alternatives

  • Baldassino, Nadia (Department of Civil, Environmental and Mechanical Engineering, Universita di Trento) ;
  • Bernardi, Martina (Department of Civil, Environmental and Mechanical Engineering, Universita di Trento) ;
  • Bernuzzi, Claudio (Department of Architecture, Built Environment and Construction Engineering, Politecnico di Milano) ;
  • Simoncelli, Marco (Department of Architecture, Built Environment and Construction Engineering, Politecnico di Milano)
  • 투고 : 2020.02.20
  • 심사 : 2020.05.15
  • 발행 : 2020.06.10

초록

Steel storage racks are lightweight structures, made of thin-walled cold-formed members, whose behaviour is remarkably influenced by local, distortional and overall buckling phenomena, frequently mutually combined. In addition, the need of an easy and rapid erection and reconfiguration of the skeleton frame usually entails the presence of regular perforations along the length of the vertical elements (uprights). Holes and slots strongly influence their behaviour, whose prediction is however of paramount importance to guarantee an efficient design and a safe use of racks. This paper focuses on the behaviour of isolated uprights subjected to both axial load and bending moments, differing for the cross-section geometry and for the regular perforation systems. According to the European standards for routine design, four alternatives to evaluate the bending moment-axial load resisting domains are shortly discussed and critically compared in terms of member load carrying capacity.

키워드

참고문헌

  1. Baldassino, N., Bernuzzi, C. and Simoncelli, M. (2019a), "Evaluation of European approaches applies to design of TWCF steel members", Thin-Wall. Struct., 143, 106-186. https://doi.org/10.1016/j.tws.2019.106186.
  2. Baldassino, N., Bernuzzi, C. and Simoncelli, M. (2019b), "Experimental vs. theoretical design approaches for thin-walled cold-formed steel beam-columns", Adv. Steel Constr., 15(1), 55-65. https://doi.org/10.18057/IJASC.2019.15.1.8.
  3. Baldassino, N., Bernuzzi, C., di Gioia, A. and Simoncelli, M. (2019c), "An experimental investigation on solid and perforated steel storage racks uprights", J. Constr. Steel Res., 155, 409-425. https://doi.org/10.1016/j.jcsr.2019.01.008.
  4. Baldassino, N. and Zandonini, R. (2011), "Design by testing of industrial racks", Adv. Steel Constr., 7(1), 27-47. https://doi.org/10.18057/IJASC.2011.7.1.3.
  5. Bernuzzi, C. and Maxenti, F. (2015), "European alternatives to design perforated thin-walled cold-formed beam-columns for storage steel systems", J. Constr. Steel Res., 110, 121-136. https://doi.org/10.1016/j.jcsr.2015.02.021.
  6. Bernuzzi, C. and Simoncelli, M. (2015), "European design approaches for isolated cold-formed thin-walled beam-columns with mono-symmetric cross-section", Eng. Struct., 86, 225-241. https://doi.org/10.1016/j.engstruct.2014.12.040.
  7. Boissonnade, N., Greiner, R., Jaspart, J.P. and Lindner, J. (2006), Rules for Member Stability in EN 1993-1-1 Background Documentation and Design Guidelines, Publication No. 119, ECCS European Convention for Structural Steelworks, Brussels, Belgium.
  8. Bonada, J., Pastor, M.M., Roure, F. and Casafont, M. (2016), "Distortional influence of pallet rack uprights subject to combined compression and bending", Structures, 8, 275-285. https://doi.org/10.1016/j.istruc.2016.05.007.
  9. Casafont, M., Bonada, J., Pastor, M.M., Roure, F. and Susin, A. (2018), "Linear buckling analysis of perforated cold-formed steel storage rack columns by means of the Generalised Beam Theory", Int. J. Struct. Stab. Dynam., 18(1), 1850004. https://doi.org/10.1142/S0219455418500049.
  10. Casafont, M., Pastor, M.M., Roure, F., Bonada, J. and Pekoz, T. (2013), "Design of steel storage rack columns via the Direct Strength Method", J. Struct. Eng., 139(5), 669-679. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000620.
  11. Choi, J.Y. and Kwon, Y.B. (2018). "Direct strength method for high strength steel welded section columns", Steel Compos. Struct., 29(4), 509-526. https://doi.org/10.12989/scs.2018.29.4.509.
  12. Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019), "Behavior of steel storage pallet racking connection - A review", Steel Compos. Struct., 30(5), 457-469. https://doi.org/10.12989/scs.2019.30.5.457.
  13. Dinis, P.B., Young, B. and Camotin, D. (2014), "Local-distortional interaction in cold-formed steel rack-section column", Thin-Wall. Struct., 81, 185-195. https://doi.org/10.1016/j.tws.2013.09.010.
  14. Dubina, D., Ungureanu, V. and Landolfo, R. (2013), Design of Cold-Formed Steel Structures. Eurocode 3: Design of Steel Structures-Part 1-3 Design of Cold-Formed Steel Structures, ECCS European Convention for Structural Steelworks, Brussels, Belgium, and Wilhelm Ernst & Sohn, Berlin, Germany.
  15. El Kadi, B., Cosgun, C., Mangir, A. and Kiymaz, G. (2017). "Strength upgrading of steel storage rack frames in the down-aisle direction", Steel Compos. Struct., 23(2), 143-152. https://doi.org/10.12989/scs.2017.23.2.143.
  16. El Kadi, B. and Kiymaz, G. (2015). "Behavior and design of perforated steel storage rack columns under axial compression", Steel Compos. Struct., 18(5), 1259-1277. https://doi.org/10.12989/scs.2015.18.5.1259.
  17. EN1990 (2002), Eurocode - Basis of structural design, European committee for Standardization, Brussels, Belgium.
  18. EN1993-1-1 (2005), Eurocode 3 - Design of steel structures - Part-1-1: General rules and rules for buildings, European committee for Standardization, Brussels, Belgium.
  19. EN1993-1-3 (2005), Eurocode 3 - Design of steel structures - Part-1-3: General rules: supplementary rules for cold-formed members and sheeting, European committee for Standardization, Brussels, Belgium.
  20. EN1993-1-3 first draft new (2018), Eurocode 3 - Design of steel structures - Part-1-3: General rules: supplementary rules for cold-formed members and sheeting, European committee for Standardization, Brussels, Belgium.
  21. EN15512 (2009), Steel storage systems - Adjustable pallet racking systems - Principle for structural design, European committee for Standardization, Brussels, Belgium.
  22. ENV1993-1-1 (1992), Eurocode 3 - Design of steel structures - Part-1-1: General rules and rules for buildings, European committee for Standardization, Brussels, Belgium.
  23. Gelmini, L. and di Gioia, A. (2017), "La torre prove della divisione ricerca e sviluppo di Metalsistem S.p.A. - The test tower of Metalsistem S.p.A. R&D Division", Costruzioni Metalliche, 6, 71-77.
  24. Hancock, G.J. (2016), "Cold-formed structures: Research review 2013-2014", Advanced in Structural Engineering, 961, 1-43. https://doi.org/10.1177/1369433216630145.
  25. Moen, C.D. (2008), "Direct Strength design of cold-formed steel members with perforations", Ph.D. Dissertation, Johns Hopkins University, Baltimore, Maryland.
  26. Montuori, R., Gabbianelli, G., Nastri, E. and Simoncelli, M. (2019), "Rigid plastic analysis for the seismic performance evaluation of steel storage racks", Steel Compos. Struct., 32(1), 1-19. https://doi.org/10.12989/scs.2019.32.1.001.
  27. prEN15512 (2018), Steel storage systems - Adjustable pallet racking systems - Principle for structural design, European committee for Standardization, Brussels, Belgium.
  28. RMI (2008), Specification for the design, testing and utilization of industrial steel storage racks, Racking Manufacturers Institute, Charlotte, NC, USA.
  29. Sena Cardoso, F. and Rasmussen, K.J.R. (2016), "Finite element (FE) modelling of storage rack frames", J. Constr. Steel Res., 126, 1-14. https://doi.org/10.1016/j.jcsr.2016.06.015.
  30. Talebian, N., Gilbert, B.P., Pham, C.H., Chariere, R. and Karampour, H. (2018), "Local and distortional biaxial bending capacities of cold-formed steel storage rack uprights", Journal of Structural Engineering (ASCE), 144(6): 04018062. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002029.
  31. Tilburgs, K. (2013), "Those peculiar structures in cold-formed steel: 'racking and shelving'", Steel Constr., 6(2), 95-106. https://doi.org/10.1002/stco.201310016.
  32. Torabian, S., Zheng, B. and Schafer, B.W. (2015), "Experimental response of cold-formed steel lipped channel beam-columns", Thin-Wall. Struct., 89, 152-168. https://doi.org/10.1016/j.tws.2014.12.003.
  33. Zandonini, R., Baldassino, N. and Freddi, F. (2014), "Robustness of steel-concrete flooring systems - An experimental assessment", Stahlbau, 83(9), 608-613. https://doi.org/10.1002/stab.201410192.