DOI QR코드

DOI QR Code

Buckling analysis of smart beams based on higher order shear deformation theory and numerical method

  • Talebizadehsardari, Pouyan (Metamaterials for Mechanical, Biomechanical and Multiphysical Applications Research Group, Ton Duc Thang University) ;
  • Eyvazian, Arameh (Mechanical and Industrial Engineering Department, College of Engineering, Qatar University) ;
  • Azandariani, Mojtaba Gorji (Structural Engineering Division, Faculty of Civil Engineering, Semnan University) ;
  • Tran, Trong Nhan (Faculty of Automobile Technology, Van Lang University) ;
  • Rajak, Dipen Kumar (Department of Mechanical Engineering, Sandip Institute of Technology and Research Centre) ;
  • Mahani, Roohollah Babaei (Institute of Research and Development, Duy Tan University)
  • 투고 : 2020.04.01
  • 심사 : 2020.05.26
  • 발행 : 2020.06.10

초록

The buckling analysis of the embedded sinusoidal piezoelectric beam is evaluated using numerical method. The smart beam is subjected to external voltage in the thickness direction. Elastic medium is simulated with two parameters of spring and shear. The structure is modelled by sinusoidal shear deformation theory (SSDT) and utilizing energy method, the final governing equations are derived on the basis of piezo-elasticity theory. In order to obtaining the buckling load, the differential quadrature method (DQM) is used. The obtained results are validated with other published works. The effects of beam length and thickness, elastic medium, boundary condition and external voltage are shown on the buckling load of the structure. Numerical results show that with enhancing the beam length, the buckling load is decreased. In addition, applying negative voltage, improves the buckling load of the smart beam.

키워드

참고문헌

  1. Alesadi, A., Galehdari, M. and Shojaee, S. (2017), "Free vibration and buckling analysis of cross-ply laminated composite plates using Carrera's unified formulation based on Isogeometric approach", Comput. Struct., 183, 38-47, https://doi.org/10.1016/j.compstruc.2017.01.013.
  2. Benahmed, A., Fahsi, B., Benzair, A., Zidour, M., Bourada, F. and Tounsi, A. (2019), "Critical buckling of functionally graded nanoscale beam with porosities using nonlocal higher-order shear deformation", Struct. Eng. Mech., 69(4), 457-466, https://doi.org/10.12989/sem.2019.69.4.457.
  3. Bilouei, B.S., Kolahchi, R. and Bidgoli, M.R. (2018), "Buckling of beams retrofitted with Nano-Fiber Reinforced Polymer (NFRP)", Comput., 18(6), 1053-106, https://doi.org/10.12989/cac.2016.18.6.1053.
  4. Eltaher, M.A. and Mohamed, S.A. (2020), "Buckling and stability analysis of sandwich beams subjected to varying axial loads", Steel Compos. Struct., 34(2), 241-260. DOI: https://doi.org/10.12989/scs.2020.34.2.241.
  5. Khelifa, Z., Hadji, L., Hassaine Daouadji, T. and Bourada, M., (2018), "Buckling response with stretching effect of carbon nanotube-reinforced composite beams resting on elastic foundation", Struct. Eng. Mech., 67(2), 125-130, https://doi.org/10.12989/sem.2018.67.2.125.
  6. Kolahchi, R., Bidgoli, M.R., Beygipoor, G. and Fakhar, M.H. (2015), Free vibration and buckling analysis of cross-ply laminated composite plates using Carrera's unified formulation based on Isogeometric approach" J. Mech. Sci. Technol., 29, 3669-3677, https://doi.org/10.1007/s12206-015-0811-9.
  7. Kolahchi, R., Hosseini, H. and Esmailpour, M. (2016a), "Differential cubature and quadrature-Bolotin methods for dynamic stability of embedded piezoelectric nanoplates based on visco-nonlocal-piezoelasticity theories", Compos. Struct., 157, 174-186, https://doi.org/10.1016/j.compstruct.2016.08.032.
  8. Kolahchi, R., Safari, M. and Esmailpour, M. (2016b), "Dynamic stability analysis of temperature-dependent functionally graded CNT-reinforced visco-plates resting on orthotropic elastomeric medium", Compos. Struct., 150, 255-265, https://doi.org/10.1016/j.compstruct.2016.05.023.
  9. Mehri, M., Asadi, H. and Wang, Q. (2016), "Buckling and vibration analysis of a pressurized CNT reinforced functionally graded truncated conical shell under an axial compression using HDQ method", Comput. Meth. Appl. Mech. Eng., 303, 75-100, https://doi.org/10.1016/j.cma.2016.01.017.
  10. Mosharrafian, F. and Kolahchi, R. (2016), "Nanotechnology, smartness and orthotropic nonhomogeneous elastic medium effects on buckling of piezoelectric pipes", Struct. Eng. Mech., 58(5), 931-947, https://doi.org/10.12989/sem.2016.58.5.931.
  11. Motezaker, M. and Eyvazian, A. (2020), "Post-buckling analysis of Mindlin Cut out-plate reinforced by FG-CNTs", Steel Compos. Struct., 34(2), 289-297, https://doi.org/10.12989/scs.2020.34.2.289.
  12. Motezaker, M. and Eyvazian, A. (2020), "Buckling load optimization of beam reinforced by nanoparticles", Struct. Eng. Mech., 73(5), 481-486, https://doi.org/10.12989/sem.2020.73.5.481.
  13. Mun, S. and Cho, YH. (2012), "Modified harmony search optimization for constrained design problems", Exp. Syst. Appl., 39, 419-423, https://doi.org/10.1016/j.eswa.2011.07.031.
  14. Nejati, M., Eslampanah, A. and Najafizadeh, M. (2016), "Buckling and vibration analysis of functionally graded carbon nanotube-reinforced beam under axial load", Int. J. Appl. Mech., 8, 1650008, 10.1142/S1758825116500083.
  15. Thai, HT., and Vo, T.P. (2012), "A nonlocal sinusoidal shear deformation beam theory with application to bending, buckling, and vibration of nanobeams", Int. J. Eng. Sci., 54, 58-66, https://doi.org/10.1016/j.ijengsci.2012.01.009.
  16. Vodenitcharova, T. and Zhang, L. (2006), "Bending and local buckling of a nanocomposite beam reinforced by a single-walled carbon nanotube", Int. J. Solids Struct., 43, 3006-3024, https://doi.org/10.1016/j.ijsolstr.2005.05.014.
  17. Yang, J., Wu, H. and Kitipornchai, S. (2017), "Buckling and postbuckling of functionally graded multilayer graphene platelet-reinforced composite beams", Compos. Struct., 161, 111-118. https://doi.org/10.1016/j.compstruct.2016.11.048.
  18. Yas, M. and Samadi, N. (2012), "Free vibrations and buckling analysis of carbon nanotube-reinforced composite Timoshenko beams on elastic foundation", Int. J. Press. Vess. Pip., 98, 119-128. https://doi.org/10.1016/j.ijpvp.2012.07.012.
  19. Zamanian, M., Kolahchi, R., and Bidgoli, M.R., (2017), "Agglomeration effects on the buckling behaviour of embedded beams reinforced with SiO2 nano-particles", Wind. Struct., 24(1), 43-57. https://doi.org/10.12989/was.2017.24.1.043.