DOI QR코드

DOI QR Code

Seismic performance of RCS beam-column joints using fiber reinforced concrete

  • Nguyen, Xuan Huy (Faculty of Construction Engineering, University of Transport and Communications) ;
  • Le, Dang Dung (Faculty of Construction Engineering, University of Transport and Communications) ;
  • Nguyen, Quang-Huy (Department of Civil Engineering and Urban Planning) ;
  • Nguyen, Hoang Quan (Faculty of Construction Engineering, University of Transport and Communications)
  • 투고 : 2020.01.20
  • 심사 : 2020.04.12
  • 발행 : 2020.05.25

초록

This paper deals with the experimental investigation on the behavior of RCS beam-column exterior joints. Two full-scale specimens of joints between reinforced concrete columns and steel beams are tested under cyclic loading. The objective of the test is to study the effect of steel fiber reinforced concrete (SFRC) on the seismic behavior of RCS joints. The load bearing capacity, story drift capacity, ductility, energy dissipation, and stiffness degradation of specimens are evaluated. The experimental results point out that the FRC joint is increased 20% of load carrying capacity and 30% of energy dissipation capacity in comparison with the RC joint. Besides, the FRC joint shown lower damage and better ductility than RC joint.

키워드

과제정보

This research is funded by Vietnam National Foundation for Science and Technology Development (NAFOSTED) under grant number 107.01-2016.06.

참고문헌

  1. ASCE Task Committee on Design Criteria for Composite Structures in Steel and Concrete (1994), "Guidelines for design of joints between steel beam and reinforced concrete columns", J. Struct. Eng., 120(8), 2330-2357. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2330).
  2. ASTM C618-17a Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete (2017), ASTM., West Conshohocken, U.S.A.
  3. Deierlein, D.D. and Noguchi, H. (2004), "Overview of U.S. - Japan research on seismic design of composite reinforced concrete and steel moment frame", J. Struct. Eng., 130(2), 361-367. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(361).
  4. Deierlein, G.G., Sheikh, T.M., Yura, J.A. and Jirsa, J.O. (1989), "Beam-column moment connections for composite frames: Part 2", J. Struct. Eng., 115(11), 2877-2896. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:11(2877).
  5. Dong, J., Hui, Ma., Zhang, N., Liu, W. and Mao, Z. (2018), "Seismic damage assessment of steel reinforced recycled concrete column-steel beam composite frame joints", Earthq. Struct., 14(1), 73-84. https://doi.org/10.12989/eas.2018.14.1.073.
  6. ECCS, T. TWG 1.3 (1986), "Recommended testing procedure for assessing the behavior of structural steel elements under cyclic loads".
  7. Fargier-Gabaldon, L. (2005), "Design of moment connections for composite framed structures", Ph.D. Dissertation, The University of Michigan, U.S.A.
  8. Gefken, P.R. and Ramey, M.R. (1989), "Increased joint hoop spacing in type 2 seismic joints using fibre reinforced concrete", ACI Struct. J., 86(2), 168-172.
  9. Gong, J., Zou, X., Shi, H., Jiang, C. and Li, Z. (2018), "Numerical Investigation of the Nonlinear Composite Action of FRP-Concrete Hybrid Beams/Decks", Appl. Sci. 2031. https://doi.org/10.3390/app8112031.
  10. Jinjie, M., Yarong, Z., Zhifeng, G. and Qingxuan, S. (2015), "Experimental research on seismic behavior of a composite RCS frame", Steel Compos. Struct., 18(4), 971-983. https://doi.org/10.12989/scs.2015.18.4.971.
  11. Kanno, R. and Deierlein, D.D. (2002), "Design Model of Joints for RCS Frames", The Proceeding of Composite Construction in Steel and Concrete IV, Alberta, Canada.
  12. Kalaivani, M. and Karthik, A. (2016), "Steel fibre reinforced concrete beam-column joint - A review", Int. J. Eng. Res. Technol., 5(5), 166- 173.
  13. Li, B., Lam, E.S., Wu, B. and Wang, Y. (2013), "Experimental investigation on reinforced concrete interior beam-column joints rehabilitated by ferrocement jackets", Eng. Struct., 56, 897-909. https://doi.org/10.1016/j.engstruct.2013.05.038.
  14. Li, W., Li, Q.N., Jiang, W.S. and Jiang, L. (2011), "Seismic performance of composite reinforced concrete and steel moment frame structures - state-of-the-art", Compos. Part B: Eng., 42(2), 190-206. https://doi.org/10.1016/j.compositesb.2010.10.008.
  15. Mirghaderi, S., Eghbali, N. and Ahmadi, M. (2016), "Moment connection between continuous steel beams and reinforced concrete column under cyclic loading", J. Construct. Steel Res., 118, 105-119. https://doi.org/10.1016/j.jcsr.2015.11.002.
  16. Nguyen, X.H., Nguyen, Q.H, Le, D.D and Mirza, O. (2017), "Experimental study on seismic performance of new RCS connection", Struct., 9, 53-62. https://doi.org/10.1016/j.istruc.2016.09.006.
  17. Nguyen, X.H., Nguyen, Q.H. and Le, D.D. (2019), "Static behavior of novel RCS through-column-type joint: Experimental and numerical study", J. Steel Compos. Struct., 32(1), 111-126. https://doi.org/10.12989/scs.2019.32.1.111.
  18. Nishiyama, I., Kuramoto, H. and Noguchi, H. (2004), "Guidelines: seismic design of composite reinforced concrete and steel buildings", J. Struct. Eng., 130(2), 336-342. https://doi.org/10.1061/(asce)0733-9445(2004)130:2(336)
  19. Oinam, R.M., Kumar, P.C. and Sahoo, D.R. (2019), "Cyclic performance of steel fiber-reinforced concrete exterior beam-column joints", Earthq. Struct., 16(5), 533-546. https://doi.org/10.12989/eas.2019.16.5.533.
  20. Parra-Montesinos, G. and Wight, J.K. (2010), "Seismic response of exterior RC column-to-steel beam connections", J. Struct. Eng., 126(10), 1113-1121. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:10(1113).
  21. Degee, H., Plumier, A., Bogdan, T., Popa, N., Cajot, L.G., De Bel, J.M. and Elghazouli, A. (2016), "Smart composite components-concrete structures reinforced by steel profiles", SmartCoCo. European Commission, Research Programme of the Research Funds for Coal and Steel, TGS, 8.
  22. Somja, H., Hjiaj, M., Nguyen, Q.H., Plumier, A. and Degee, H. (2018), "The SMARTCOCO design guide for hybrid concrete-steel structures", The Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures, Valencia, Spain, June.
  23. Yoo, D.Y., Shin, H.O. and Yoon, Y.S. (2016), "Ultrasonic monitoring of setting and strength development of ultra-high-performance concrete", Mat., 9(4), 294. https://doi.org/10.3390/ma9040294.
  24. Zhang, X., Jiawei, Z., Xuejian, G. and Shaohua, Z. (2018), "Seismic performance of prefabricated high-strength concrete tube column-steel beam joints", Advan. Struct. Eng., 21(5), 658-674. https://doi.org/10.1177/1369433217726895.