DOI QR코드

DOI QR Code

Seismic reliability analysis of structures based on cumulative damage failure mechanism

  • Liu, Qiang (College of Engineering Technology, Jimei University) ;
  • Wang, Miaofang (College of Engineering Technology, Jimei University)
  • 투고 : 2019.12.20
  • 심사 : 2020.03.04
  • 발행 : 2020.04.25

초록

Non-stationary random seismic response and reliability of multi-degree of freedom hysteretic structure system are studied based on the cumulative damage failure mechanism. First, dynamic Eqs. of multi-degree of freedom hysteretic structure system under earthquake action are established. Secondly, the random seismic response of a multi-degree freedom hysteretic structure system is investigated by the combination of virtual excitation and precise integration. Finally, according to the damage state level of structural, the different damage state probability of high-rise frame structure is calculated based on the boundary value of the cumulative damage index in the seismic intensity earthquake area. The results show that under the same earthquake intensity and the same floor quality and stiffness, the lower the floor is, the greater the damage probability of the building structure is; if the structural floor stiffness changes abruptly, the weak layer will be formed, and the cumulative damage probability will be the largest, and the reliability index will be relatively small. Meanwhile, with the increase of fortification intensity, the reliability of three-level structure fortification is also significantly reduced. This method can solve the problem of non-stationary random seismic response and reliability of high-rise buildings, and it has high efficiency and practicability. It is instructive for structural performance design and estimating the age of the structure.

키워드

참고문헌

  1. Baber, T.T. and Wen, Y.K. (1981), "Random vibration hysteretic degrading systems", J. Eng. Mech. ASCE, 107(6), 1069-1087.
  2. GB 50011 (2010), "Code for seismic design of buildings", Beijing: China Architecture & Building Press.
  3. Guo, D.F. and Wang, X.H. (1999), "Dynamic and reliability analysis of nonlinear hysteretic system with stochastics seismic response", J. Xi'an Jiao Tong Univ., 33, 65-68. http://10.3321/j.issn:0253-987X.1999.04.016.
  4. Huang, X. and Zhao, J. (2017), "A cumulative damage model for extremely low cycle fatigue cracking in steel structure", Struct, Eng. Mech., 62(2), 1-12. https://doi.org/10.12989/sem.2017.61.2.000.
  5. Jinren, J. and Feng, H. (1985), "The analysis of the seismic reliability on multi-storey brick building", Earthq. Eng. Eng. Vib., 5(4), 13-27. http://10.13197/j.eeev.1985.04.002.
  6. Li, G., Cao H. and Li Q. (1993), "The theory and its application on the structure's dynamic reliability", Beijing Earthquake Press.
  7. Li, J. and Chen, J.B. (2009), "Advances in theory and applications of random vibration", Tongji Univ. Press.
  8. Li, J., Wang, T. and Shang, Q. (2019), "Probability-based seismic reliability assessment method for substation systems", Earthq. Eng. Struct. Dyn., 48(3), 328-346. https://doi.org/10.1002/eqe.3138.
  9. Li, Z., He, M., Lam, F., Zhou, R.R. and Li, M. (2017), "Seismic reliability evaluation of steel-timber hybrid shear wall systems", Earthq. Struct., 13(3), 289-297. https://doi.org/10.12989/eas.2017.13.3.289
  10. Lin, J. and Zhang, Y. (2004), "Random vibration of pseudo excitation method", Beijing Sci. Press.
  11. Lin, L. and Yang, W.J. (2012), "Seismic reliability analysis of bottom frame structure based on damage classification", Earthq. Eng. Eng. Vib., 32, 65-72. http://10.13197/j.eeev.2012.06.022.
  12. Lu, D.G. and Wang, G.Y. (2001), "Decision-making method of optimal fortification level for aseismic structures based on damage performance", China Civil Eng. J., 34, 44-49. http://10.15951/j.tmgcxb.2001.01.009
  13. Mariano, A.Z. and Lorenzo, H. (2019), "Center and Characteristic seismic reliability as new indexes for accounting uncertainties in seismic reliability analysis", Soil Dyn. Earthq. Eng., 123, 110-123. https://doi.org/10.1016/j.soildyn.2019.04.028.
  14. Ni, K. (1999), "Advances in stochastic theory of fatigue damage accumulation", Advan. Mech., 29, 43-65. http://10.6052/1000-0992-1999-1-J1998-055.
  15. Osama, A., David, B. and Hassen, R. (2018), "Seismic performance of reinforced concrete frame structures strengthened with FRP laminates using a reliability-based advanced approach", Compos. Part B, 139, 238-248. http://10.1016/j.compositesb.2017.11.051.
  16. Ou, J.P., Duan, Y.B. and Liu, H.Y. (1994), "Structural random earthquake action and its statistical parameters", J. Harbin Eng. College, 27, 1-10.
  17. Ou, J.P., Niu, D.T. and Du, X.L. (1991), "Random earthquake ground motion model and its parameter determination used in aseismic design", Earthq. Eng. Eng. Vib., 11(3), 45-54.
  18. Parham, S., Houtan, T.O. and Seyed, M.Z. (2018), "Seismic reliability-based design of inelastic base-isolated structures with lead-rubber bearing systems", Soil Dyn. Earthq. Eng., 115, 589-605. https://doi.org/10.1016/j.soildyn.2018.09.033.
  19. Shen, Z., Dong, B. and Cao, W. (1997), "Development and evaluation of researches on damage cumulation analysis for building structures. J. Tongji Univ., 25(2), 135-140. http://worldcat.org/issn/0253374X. https://doi.org/10.3969/j.issn.1008-0392.2004.02.016
  20. Sun, Z., Wang, S.G, Wang, Y.Y. and Liu, W.Q. (2011), "Non-stationary random response and dynamic reliability of high-rise seismic isolated structure. J. Build. Struct., 32(12), 121-126.
  21. William, G.B., Mark, J.M., Jamshid, M., Richard, J.N. and Shahram, S. (1997), "Fatigue reliability reassessment procedures; fatigue-liability reassessment applications: state of the art paper", J. Struct. Eng., 123(3), 271-276. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:3(277).
  22. Xiu-li, D.U. (1998), "A random seismic input model used in seismic reliability design and analysis of hydraulic buildings", Earthq. Eng. Eng. Vib., 18(14), 76-81.
  23. Yang, C.X., Shi, C.X. and Yang, W.J. (2006), "Experimental investigation on pseudo-dynamic test of concrete perforated brick masonry building model", J. Build. Struct., 27(3), 84-92. https://doi.org/10.3321/j.issn:1000-6869.2006.03.011
  24. Yang, W.J., Zhang, Z.H. and Lin, L. (2010), "Research on seismic reliability of structure based on boundary value of damage index", Earthq. Eng. Eng. Vib., 30, 77-83. http://10.13197/j.eeev.2010.01.004.
  25. Yang, W.J., Zhang, Z.H. and Yu, H. (2011), "The research of seismic reliability of a steel frame based on complex modal method for analysis of random response", World Earthq. Eng., 27, 102-109.
  26. Yongfeng, D.U., Enhai, Z. and Hui, L. (2006), "Dynamic reliability of isolated structure for 'undamaged under minor earthquake", Earthq. Eng. Eng. Vib., 24(5), 84-89. https://doi.org/10.3969/j.issn.1000-1301.2004.05.016
  27. Zhong, W.X. (1994), "On precise time-integration method for structural dynamics", J. Dalian Univ. Technol. 34, 131-136.